Register your product and get support at www.philips.
1 2 3 4 5 6 Important 4 Safety Notice 4 6 Your product 7 Introduction What’s in the box Overview of the main unit Overview of the remote control 7 7 8 9 Get started 10 Placement Prepare the remote control Connect power Auto install radio stations Set clock Turn on 10 10 11 11 11 12 Play 12 Play disc Play from USB Pause/resume play Skip to a track Search within a track Display play information Program tracks 12 12 12 13 13 13 13 Adjust sound 14 Adjust volume Se
1 Important Safety g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or produce heat. i Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Batteries (battery pack or batteries installed) shall not be exposed to @ G : " or the like. o Apparatus shall not be exposed to dripping or splashing. p Do not place any sources of danger on q Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning Never remove the casing of this apparatus. Never lubricate any part of this apparatus.
Notice = " $ $ device that are not expressly approved by Philips Consumer Lifestyle may void the user’s " " * $ > This product complies with the radio " " " * " $ H " Community. Your product is designed and manufactured ' = * $ " $ : which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC.
English 2 Your product Congratulations on your purchase, and ' $ J Q ! % " $ support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can enjoy audio from discs, USB devices, and other external devices, or listen to radio stations. The unit offers Digital Sound Control (DSC) and Dynamic Bass Boost (DBB) to enrich sound.
Overview of the main unit k l m MP3-LINK h i d e f g FM ANT n j a Turn on the unit, or switch to standby mode, or switch to Eco Power standby. b SOURCE Select a source: CD, FM tuner, USB, or MP3 link. c Skip to the previous/next track. Search within a track. Tune to a radio station. Start or pause play. For FM radio, select stereo or mono sound output. Stop play or erase a program. d e f VOLUME + / Adjust volume.
Turn on the unit, or switch to standby mode, or switch to Eco Power standby. Mute or restore volume. b a c CD Select disc source. b c CD FM PRESET/ALBUM s d r q d MP 3 LINK USB e USB Select USB device source. p g f DISPLAY RDS o g h VOL 2 3 4 5 6 7 8 9 j PROG/ CLOCK SET 0 REPEAT/ SHUFFLE n k SLEEP/ TIMER DSC DBB m l Stop play. h VOL +/ Adjust volume. i Numeric keypad Select a track from a disc directly. 1 i Skip to the previous/next track.
p MP3 LINK Select external audio device source. 3 Get started q Start or pause play. For FM radio, select stereo or mono sound output. r PRESET/ALBUM / Skip to the previous/next album. Select a preset radio station. s FM Select FM radio source. Caution Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.
1 2 Open the battery compartment. 3 Close the battery compartment. Insert 2 AAA batteries with correct polarity (+/-) as indicated. Auto install radio stations When you connect power and no radio stations are stored, the unit automatically begins to store radio stations. 1 Connect the unit to the power supply. » [AUTO INSTALL - PRESS PLAY KEY](auto install - press play key) is displayed. 2 Press on the main unit to start installation.
Turn on 1 Press . » The unit switches to the last selected source. 4 Play Play disc Press CD to select the disc source. Switch to standby 1 2 1 3 Insert a disc with the printed side facing outward, and then press to close the disc compartment. 4 If the disc doesn’t play, press To stop play, press . When the unit is turned on, press to switch the unit to standby. In standby, press and hold to switch from normal standby to Eco power standby or vice versa.
Program tracks For CD: You can program a maximum of 20 tracks. 1 1 In CD/USB mode, in the stop position, press PROG/CLOCK SET to activate the program mode. » [PROG] (program) and track number begin to blink. 2 For MP3 tracks, press album. 3 Press / to select a track number, then press PROG/CLOCK SET "$> 4 Repeat steps 2 to 3 to program more tracks. 5 Press to play the programmed tracks. » During play, [PROG] (program) is displayed. Press / to select another track.
5 Adjust sound 6 Listen to radio Adjust volume Tune to a radio station 1 1 2 During play, press VOL +/- to increase/ decrease the volume. Select a preset sound effect 1 During play, press DSC repeatedly to select a preset sound setting. Press and hold / for more than 2 seconds. » [SEARCH] (search) is displayed. » The radio tunes to a station with strong reception automatically. 3 Enhance bass 1 Press FM. During play, press DBB to turn on or off dynamic bass enhancement.
7 Other features English Program radio stations manually Set the alarm timer Note You can program a maximum of 20 preset radio stations. This unit can be used as an alarm clock. The disc/radio/USB is activated to play at a preset time. 1 Press PROG/CLOCK SET to activate program mode. » [PROG] (program) begins to blink. Make sure that you have set the clock correctly. 2 3 Press to switch the unit to standby. Make sure that the clock is displayed (see “Turn on” > “Switch to standby”).
Set the sleep timer This unit can switch to standby automatically after a set period of time. 1 When the unit is turned on, press SLEEP/ TIMER repeatedly to select a set period of time (in minutes). » When sleep timer is activated, is displayed. 8 Product information Note Product information is subject to change without prior notice. To deactivate sleep timer 1 Press SLEEP/TIMER repeatedly until [OFF] (off) is displayed. » When sleep timer is deactivated, disappears on the display.
AC power Operation Power Consumption Eco Standby Power Consumption USB Direct Dimensions - Main Unit (W x H x D) Weight - Main Unit " >' G: >$ : >$ : >$ : > "$ AC 100-240V~, 50/60 Hz 20 W Maintenance <1 W Version 2.0/1.1 Clean the cabinet Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. 500 x 217 x 98 mm 2.
9 Troubleshooting Warning Never remove the casing of this apparatus. No disc detected # Insert a disc. # Check if the disc is inserted with the print side facing inward. # Wait until the moisture condensation at the lens has cleared. # Replace or clean the disc. # " "" "$ > To keep the warranty valid, never try to repair the system yourself.
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. MCM3050_12_UM_V2.
