Specifications

English
13
Basic Functions
Important!
Before you operate the system, complete
the preparation procedures.
Switching the system on/off
● Press STANDBY-ON 2.
➜ The system will switch to the last selected
source.
● Press SOURCE on the front panel or CD,
TUNER or AUX on the remote control.
➜ The system will switch to the selected source.
● Press LEFT OPEN • CLOSE or RIGHT
OPEN • CLOSE on the front panel (L ç or
R çon the remote).
➜ The system will switch to the CD source.
To switch the system to standby mode
● Press STANDBY-ON B.
➜ The volume level (up to a maximum volume
level of 13), interactive sound settings, last
selected mode, source and tuner presets will be
retained in the player's memory.
Power Saving Automatic
Standby
As a power-saving feature, the system
automatically switches to Standby 30 minutes
after a CD has reached the end and no control
is operated.
Adjusting volume and sound
1 Press VOLUME -/+ (VOL +/- on the remote)
to decrease or increase the volume.
➜ Display shows the volume level VOL and a
number from MIN1, 2, ...30, 31 MAX.
2 Press DSC on the remote repeatedly to select
the desired sound effect: ROCK/ JAZZ/ POP/
CLASSIC.
3 Press DBB on the remote to switch bass
enhancement on or off.
➜ Display shows: DBB.
4 Press IS on the remote repeatedly.
➜ If activated, INCR SUR is displayed.
➜ If deactivated, IS OFF is displayed.
5 Press MUTE on the remote to interrupt sound
reproduction instantly.
➜ Playback will continue without sound and the
display shows MUTE.
● To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
Dimming the display screen
● Press DIM on the remote repeatedly to turn on
or off the dim function for the display screen.
pg001-024_MCM299_55_Eng 2006.9.19, 15:2213