Quick start guide

2
Install
Mounting the stand onto the set
1
Rear connections
3
Connect the cable of the left speaker to LEFT (red and black) and the cable
of the right speaker to RIGHT (red and black).
Extend the wire antenna and fit it to FM ANTENNA.
Insert the MW antenna to MW ANTENNA jacks.
Connect the power adaptor to the wall socket.
4
1
Locate the bottom of the main unit and find the slot, then slide the stand
in the slot until it stops, as indicated in the figure.
Tip
– To receive optimal radio reception, put
the main unit and the antennas as far
away as possible from the power adaptor.
MCM279 QSG_12_Eng 5/16/08, 12:122