MCM277 Micro Hi-Fi System Register your product and get support at www.philips.com/welcome P001-P026_MCM277_98_Eng 1 2008.1.
8 1 2 7 6 3 5 4 9 0 ! @ % # $ 2 P001-P026_MCM277_98_Eng 2 2008.1.
English Index English ------------------------------------------------ 4 -------------------------------------------------------- 27 3 P001-P026_MCM277_98_Eng 3 2008.1.
Contents English General Information Supplied accessories ............................................ 5 Environmental Information ................................ 5 Safety Information ................................................ 5 Display track information (MP3/WMA only) ............................................... 18 Tuner Tuning to radio stations .................................... 19 Programming radio stations .............................
Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/ welcome. Supplied accessories – – – – – – 2 speaker boxes including 2 speaker cables remote control (with 1 x CR2025 battery) MW loop antenna FM wire antenna stand mounting kit Environmental Information All unnecessary packaging has been omitted.
Controls English Controls on the set (illustrations on page 3) 2 – – 3 – 4 – 5 – 6 7 – – – press briefly to switch the set on or off; SOURCE selects sound source CD, USB,TUNER or AUX In standby: switches the set on and selects sound source CD, USB,TUNER or AUX IR sensor for the infrared remote control Helpful hints: Always point the remote control towards this sensor.
Remote control – – 1 2 3 4 5 AUX AUX PDISPLAY TIMER SLEEP RDS/NEWS CLOCK DSC DBB TUNER selects TUNER source and toggles between the wavebands: FM and MW In standby: switches the set on and selects TUNER source * & ^ – selects the audio input from an additional connected appliance – In standby: switches the set on and selects the audio input from an additional connected appliance 6 6 7 % $ # @ – Clock: - displays the set time – In standby mode: enters the clock setting mode (press and
Controls Installation Placing MCM277 – adjusts the volume level – Clock/Timer: adjusts the hours and minutes # 9 CD/USB: stops playback; erase a program OPEN/CLOSE opens/closes the CD door – $ – With the detachable stand and by-packed wall mounting kit , MCM277 allows you to place it in two ways: on desktops with stand or on walls without stand.
English Installation FM wire antenna MW loop antenna Speaker (right) Speaker (left) AC power cord Rear connections Warning: – Never make or change connections with the mains supply switched on. – Install your set near the AC outlet and where the AC power plug can be reached easily. A Speaker connections Use the supplied speakers only. Using other speakers can damage the set or the sound quality will be negatively affected.
English Or Insert the loop antenna into the slot on the set 2 3 Move the antenna in different positions for optimal reception (as far away as possible from the TV, VCR or other radiation sources) Fix the antenna’s end to the wall Connecting an additional appliance Connecting a USB device or memory card 2 3 By connecting a USB mass storage device (including USB flash memory, USB flash players or memory cards) to the Hi-Fi system, you can enjoy the device’s stored music through the powerful speakers of
Using AC power Connecting a non-USB device It is possible to use an additional appliance, e.g. TV, VCR or CD recorder with the set. On MCM277, you can playback music from an external source.
Preparation English Setting the clock Using the remote control IMPORTANT! – Remove the protective plastic tab before using the remote control. 1 – Always point the remote control directly towards IR area. Remove the plastic protective sheet Notes for remote control: – First select the source you wish to control by pressing one of the source select keys on the remote control (for example CD,TUNER). – Then select the desired function (for example ÉÅ, 4 , ¢).
Switching on/off the set and selecting functions 1 2 3 Auto-standby When the set has reached the end of CD playback and remains in the stop position for more than 15 minutes, the set will switch off automatically to save power. To switch on, press STANDBY-ON or SOURCE on the set (or y on the remote control) ➜ The set switches to the last source selected OR On the remote control, press the source button (e.g.
Basic Functions English Sound control DSC Digital Sound Control enables you to select predefined sound settings. ● Press DSC repeatedly to select the desired sound setting: ROCK, JAZZ, POP, CLASSIC DBB ● Press DBB (Dynamic Bass Boost) once or more to switch bass enhancement on or off. ➜ DBB appears if DBB is activated Displaying the clock ● During playback, press DISPLAY/CLOCK on the remote control repeatedly to switch between the clock display and the playback display.
IMPORTANT! – Make sure that the file names of MP3 files end with .mp3. – For DRM protected WMA files, use Windows Media Player 10 (or later) for CD burning/ conversion. Visit www. microsoft.com for details about Windows Media Player and WM DRM (Windows Media Digital Rights Management).
CD English Helpful hints: – If you have not organized MP3/WMA files into any albums on your disc, an album “00” will be automatically assigned for all those files.
Programming tracks 1 You may store up to 40 tracks in the desired sequence. If you like, store any track more than once. In the stop position, press PROG to start programming ➜ flashes ➜ Audio CD: Display shows PROG and current track number MP3/WMA: Display shows current album/ track number English CD Helpful hints: – The set will return to the stop position if no button is pressed within 90 seconds. disappears. To resume programming, press PROG. – MP3/WMA: When playing a program, use of 3 / 4 are void.
CD English Different play modes: REPEAT, SHUFFLE REPEAT TRACK– plays the current track continuously REPEAT ALL– plays the entire disc/program continuously SHUFFLE – plays all the tracks in random order 1 During playback, press once or more REPEAT or SHUFFLE to select play modes 2 To return to normal playback, press REPEAT or SHUFFLE repeatedly until the various modes are no longer displayed Helpful hints: – In the shuffle mode, press ¢ to select tracks.
Tuning to radio stations 1 2 Press SOURCE once or more to select TUNER (or TUNER on the remote control) Press TUNER on the remote control repeatedly to select your desired waveband, FM or MW ➜ Display shows: , radio station frequency, waveband and if programmed, a preset number English Tuner Note: – If no tuner preset number is selected, default is preset 1 and all your presets will be erased.
USB English Using a USB mass storage device By connecting a USB mass storage device to the Hi-Fi system, you can enjoy the device’s stored music through the powerful speakers of Hi-Fi system. Playing a USB mass storage device Compatible USB mass storage devices With the Hi-Fi system, you can use – USB flash memory (USB 2.0 or USB1.1) – USB flash players (USB 2.0 or USB1.
1 2 AUX Check the USB device has been properly connected.
Timer SLEEP English Setting the timer The set can be used as an alarm clock, whereby the selected source (CD, TUNER or USB) star ts playback at a preset time. Make sure the clock is set before using the timer. 1 Press and hold TIMER on the remote control until SET TIMER appears ➜ flashes.
AMPLIFIER Output power .......................................... 2 x 5 W RMS ............................................................ 10 W + 10 W MPO Signal-to-noise ratio ....................................... ≥ 75 dBA Frequency response ........ 50 – 20,000 Hz, ± 3 dB Input sensitivity AUX ....................... 0.5 V (max. 2 V) Impedance loudspeakers ..................................... ≥ 4 Ω Impedance headphones .................... 32 Ω -1000 Ω ..................................................
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution “NO DISC” is displayed. ✔ Insert a disc.
The remote control does not function properly. ✔ Select the source (CD or TUNER, for example) ✔ ✔ ✔ ✔ before pressing the function button (ÉÅ,4 , ¢). Reduce the distance between the remote control and the system. Insert the battery with its polarities (+/– signs) aligned as indicated. Replace the battery. Point the remote control directly toward IR sensor on the front of the system. The timer is not working. ✔ Check the set is switched off ✔ Set the clock correctly.
Appendix English How to mount your MCM277 onto walls Mounting your MCM277 1 IMPORTANT! – The wall mounting instructions are for the use of the qualified wall mounting person only! – Ask a qualified person to help you with the wall mounting, which includes drilling holes on the wall and mounting the set onto walls. What’s in the supplied mounting kits Align the template in the chosen location on a wall. Use a pencil to mark the drilling positions (as shown) 140 mm (5.51") 2 3 140 mm (5.
Meet Philips at the Internet http://www.philips.com English MCM277 CLASS 1 LASER PRODUCT Printed in China PageBack_MCM277_98 94 PDCC-JS-JW-0801 2008.1.
