Always there to help you Register your product and get support at www.philips.
Contents 1 Important 2 Safety Notice 2 2 2 Your Micro Music System 5 3 Get started 8 Introduction What's in the box Overview of the main unit Overview of the remote control Connect speakers Connect power Prepare the remote control Power on Set the clock Select a source 5 Listen to the radio 13 6 Adjust sound 14 7 Other features 15 Select a preset sound effect Adjust volume level Mute sound Set the alarm timer Set the sleep timer Listen to an external device 9 Troubleshooting 19 17 17 18
1 Important Safety Read and understand all instructions before you use this micro music system. If damage is caused by failure to follow the instructions, the warranty does not apply. Risk of electric shock or fire! • Never remove the casing of the product. • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately.
Compliance This product complies with the radio interference requirements of the European Community. This apparatus includes this label: Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC.
Note •• The type plate is located on the back of the product.
2 Your Micro Music System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Introduction With this unit, you can: • enjoy audio from discs, USB devices, and other external devices; • listen to radio stations.
Overview of the main unit h a b g c f d e a • • Turn on the product. Switch to standby mode or ECO power standby mode. b Display panel • Show current status. c • Connect USB storage devices. d AUDIO IN • Connect external audio devices. e Disc compartment f • Open or close the disc compartment. g VOLUME • Adjust volume. h SOURCE • Select a source: DISC, USB, TUNER, AUDIO IN. / • Skip to previous/next track. • Search within a track/disc. • Tune to a radio station. • Adjust time.
f VOL +/• Adjust volume. Overview of the remote control g MUTE • Mute or restore volume. a b c CD FM r h SOUND • Enrich sound effect with Digital Sound Control (DSC). q i CLOCK • Set the clock. • View clock information. AUDIO IN PRESET/ALBUM d p e REPEAT f VOL g SHUFFLE MUTE DISPLAY SOUND CLOCK PROG TIMER h i SLEEP o n m l k j j SLEEP/TIMER • Set sleep timer. • Set alarm timer. k PROG • Program tracks. • Program radio stations. • Auto store FM radio stations.
3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. Connect speakers Note •• Insert the stripped portion of each speaker wire into the socket completely. •• For better sound quality, use the supplied speakers only.
Prepare the remote control »» The red ECO power standby indicator turns on. • Caution •• Risk of product damage! When the remote control is In Eco power standby mode, press to switch between working mode and ECO power standby mode. not used for long periods, remove the batteries. To insert the remote control battery: 1 2 3 Open the battery compartment. Insert the supplied AAA battery with correct polarity (+/-) as indicated. Close the battery compartment.
Select a source On the main unit Press SOURCE repeatedly to select a source. • [DISC]: the disc in the disc compartment • [USB]: .mp3 files stored on the connected USB storage device • [TUNER]: the FM tuner • [AUDIO IN]: the audio input through the AUDIO IN socket On the remote control Press CD, FM, or AUDIO IN/USB to select each source directly. • CD: the disc in the disc compartment • FM: the FM tuner • AUDIO IN/USB: the audio input through the AUDIO IN socket, or the .
4 Play 1 2 Insert a USB device into the socket. Press USB/AUDIO IN repeatedly to select the USB source. »» Play starts automatically. If not, press . Play from disc 1 2 3 4 Press CD to select CD source. Press to open the disc compartment. Insert a disc with the label side up. Press to close the disc compartment. »» Play starts automatically. If not, press . USB Control play CD / / REPEAT Play from USB Note SHUFFLE VOL +/MUTE SOUND DISPLAY Start, pause, or resume play. Stop play.
Skip tracks When playing a CD: Press / to select tracks. When playing an MP3 disc and USB: 1 2 Press Press / to select an album or a folder. / to select a track or a file. Program tracks This function allows you to program 20 tracks in the desired sequence. 1 2 3 4 5 In stop mode, press PROG to activate the program mode. »» [PROG] (program) and [01 PR 01] are displayed. For MP3 tracks, press album. to select an Press / to select a track, and then press PROG to confirm.
5 Listen to the radio Tune to a radio station Tip Program radio stations manually 1 2 3 •• Position the antenna as far as possible from TV, VCR, or other radiation source. •• For optimal reception, fully extend and adjust the position of the antenna. 1 2 3 Press FM repeatedly to select FM source. Press and hold / for more than two seconds. »» The radio tunes to a station with strong reception automatically. Repeat step 2 to tune to more stations.
6 Adjust sound The following operations are applicable to all supported media. Select a preset sound effect • Press SOUND repeatedly to select a preset sound effect. • DSC1, DSC2, DSC3, DSC4, and DSC5 Adjust volume level • • On the remote control, press VOL +/repeatedly. On the main unit, rotate the volume knob. Mute sound • Press MUTE to mute or restore the sound.
7 Other features Note •• If you do not stop an alarm, it keeps ringing for 30 minutes, and then the product automatically switches to normal standby mode. Set the alarm timer This product can be used as an alarm clock. You can select the disc, FM, or .mp3 files on a USB storage device as alarm source. Activate/deactivate alarm timer In standby mode, press SLEEP/TIMER repeatedly to activate or deactivate timer. »» If timer is activated, is displayed.
2 3 Press AUDIO IN repeatedly to select AUDIO IN source. Start to play the device (see the device user manual).
8 Product information USB USB Direct Version USB 5 V Power Note Disc •• Product information is subject to change without prior notice. Amplifier Signal to Noise Ratio Total Harmonic Distortion Aux Input 15 W 60 Hz - 16 kHZ; +3 dB >70 dB <1% 800 mV RMS Speakers Speaker Impedance Speaker Driver Sensitivity Laser Type Disc Diameter Support Disc Audio DAC Total Harmonic Distortion Frequency Response Specifications Maximum Output Power Frequency Response 2.
• memory cards (requires an additional card reader to work with this unit) Supported USB formats: • USB or memory file format: FAT12, FAT16, FAT32 (sector size: 512 bytes) • MP3 bit rate (data rate): 32-320 Kbps and variable bit rate • Directory nesting up to a maximum of 8 levels • Number of albums/ folders: maximum 99 • Number of tracks/titles: maximum 999 • File name in Unicode UTF8 (maximum length: 32 bytes) Unsupported USB formats: • Empty albums: an empty album is an album that does not contain MP3/W
9 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
Specifications are subject to change without notice 2014 © WOOX Innovations Limited. All rights reserved.Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. MCM2300_12_EN_CCR_V2.
