Flat Panel Television User Manual

8 EN
• Press to switch this product
• between the working mode and the
normal standby mode, or
• from the eco power standby mode to
the working mode.
Set the clock
Note
• During setting, if no action is made within 90 seconds,
the product exits clock setting without saving earlier
operations.
1 In standby mode, press and hold CLOCK
to enter the clock setting mode.
» or is displayed.
2 Press + VOL - or / to select
or , and then press CLOCK.
• : 24-hour time format
• : 12-hour time format
» The hour digits begin to blink.
3 Press + VOL -or / to set the hour,
and then press CLOCK.
» The minute digits begin to blink.
4 Press + VOL - or / to set the
minute, and then press CLOCK.
» The set clock is displayed.
Select a source
On the product, press SOURCE repeatedly to
select a source.
• : the audio input through the
AUDIO IN socket
• : the disc in the disc compartment
• :.mp3lesstoredontheconnected
USB storage device
• : the FM tuner
You can also press source buttons on the
remote control to select a source.
• FM: the FM tuner
• CD: the disc in the disc compartment
• AUDIO IN/USB: the audio input through
the AUDIO INsocket,orthe.mp3les
stored on the connected USB storage
device
Adjust the brightness of LCD
display
1 In normal standby mode, press and hold
DISPLAY until , , or is
displayed.
2 Press VOL +/- or / to select ,
, or .