Register your product and get support at www.philips.
1 Important Safety Notice 2 Your Micro System Introduction What’s in the box Overview of the main unit Overview of the remote control 3 Get started Connect speakers Connect power Install remote control batteries Set clock Turn on 4 Play Play disc Play from USB Listen to an external device 5 Play options Repeat and random play Program tracks Display play information 6 Listen to the radio Tune to a radio station Program radio stations automatically Program radio stations manually Select a preset radio st
1 Important Safety a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Hearing safety Listen at a moderate volume. • Using headphones at a high volume can impair your hearing. This product can produce sounds in decibel ranges that may cause hearing loss for a normal person, even for exposure less than a minute. The higher decibel ranges are offered for those that may have already experienced some hearing loss.
Recycling Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.Philips.com/welcome. What’s in the box English 2 Your Micro System Check and identify the contents of your package: • • • • • Main unit Power adapter Loudspeaker boxes x 2 Remote control MP3 link cable Introduction With this apparatus, you can enjoy music from audio discs,external devices, and listen to radio stations.
Overview of the main unit a Display panel • Display current status. b STANDBY-ON • Turn on the apparatus; switch to standby mode. c • 8 EN Open or close the disc compartment. d • Start or pause play. e DBB • Turn on or off dynamic bass enhancement. f TUNING / • Skip to the previous/next track. • Tune to a radio station.
Search within a track. h • Overview of the remote control English • g Disc compartment USB socket. i MP3 LINK • Jack for an external audio device. j • Headphone socket. k PRESET/ALBUM • Select a preset radio station. • Skip to the previous/next album. l DSC • Select a preset sound setting. m • • Stop play. Erase a program. n - VOLUME + • Adjust volume. • Adjust time. o CLOCK • Set the clock. • View the clock. p Remote control sensor q SOURCE • Select a source.
f DISPLAY • Select display information during play. g VOL +/• Adjust volume. • Adjust time. h Numeric keypad 0-9 • Select a preset radio station. • Select a track from a disc directly. i PROG • Program radio stations. • Program tracks. j SLEEP/TIMER • Set the sleep timer. • Set the alarm timer. • Activate or deactivate timer. k DSC • Select a preset sound setting. l DBB • Turn on or off dynamic bass enhancement. m REPEAT/SHUFFLE • Select repeat play modes. • Select shuffle play modes. n • • Stop play.
Connect power English 3 Get started Caution • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
3 Close the battery compartment. Switch to standby 1 Press to switch the apparatus to standby mode. » The backlight on the display panel is reduced. » The clock (if set) appears on the display panel. To switch the apparatus to Eco Power Standby mode: 1 Set clock 1 In standby mode, press and hold CLOCK on the main unit to activate the clock setting mode. » [SET CLOCK] (set clock) is displayed briefly. Then the hour digits are displayed and begin to blink.
English 4 Play Play disc 1 2 3 Press CD to select the disc source. Press to open the disc tray. Insert a disc with the printed side facing up, then close the disc tray. » Play starts automatically. • • • • • To pause/resume play, press . To stop play, press . For MP3/WMA files: to select an album, press . To skip to a track, press / . To search within a track, press and hold / . Release to resume normal play. 3 Press USB to select the USB source. » Play starts automatically.
Display play information 5 Play options 1 Repeat and random play 1 Press REPEAT/SHUFFLE repeatedly to select: • [REP] (repeat): the current track is played repeatedly. • [REP ALL] (repeat all): all tracks are played repeatedly. • [SHUF] (shuffle): all tracks are played randomly. • [SHUF REP ALL] (repeat all randomly): all tracks are played repeatedly in random order. 2 To return to normal play, press REPEAT/ SHUFFLE repeatedly until play mode is no longer displayed.
Program radio stations manually English 6 Listen to the radio Note Tune to a radio station Note • For optimal reception, fully extend and adjust • You can program a maximum of 20 FM radio stations and 10 MW radio stations. 1 2 the position of the FM antenna. 1 2 Press TUNER to select the tuner source. 3 Repeat step 2 to tune to more stations. • To tune to a weak station, press / repeatedly until you find optimal reception. Press PROG to activate program mode.
7 Adjust sound Adjust volume level 1 During play, press VOL +/- to increase/ decrease the volume level. Select a preset sound effect 1 During play, press DSC repeatedly to select: • [POP] (pop) • [JAZZ] (jazz) • [CLASSIC] (classic) • [ROCK] (rock) Enhance bass 1 During play, press DBB to turn on or off dynamic bass enhancement. » If DBB is activated, [DBB] is displayed. Mute sound 1 During play, press sound.
8 Activate and deactivate the alarm timer 1 Set the sleep timer This unit can switch to standby automatically after a preset period of time. 1 Press SLEEP/TIMER repeatedly until [SLP OFF] is displayed. » When sleep timer is deactivated, disappears on the display. Note • If disc/USB device source is selected and the track cannot be played, tuner is activated automatically. Listen through headphone 1 Set the alarm timer In standby mode, press SLEEP/TIMER repeatedly to activate or deactivate the timer.
9 Product information Speakers Speaker Impedance 4ohm General information-Specs Note • Product information is subject to change Switching mode power supply Model: GFP181T1512-1 or GFP181DA-1512-1, Input: AC100240V~, 50/60Hz, 0.35A Output: DC15V, 1.2A Operation Power Consumption 26 W Standby Power Consumption <4 W Eco Standby Power Consumption <1 W without prior notice.
Maintenance Compatible USB devices: Clean the cabinet • • • • USB flash memory (USB 2.0 or USB1.1) USB flash players (USB 2.0 or USB1.
10 Troubleshooting Caution • Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. Philips.com/support). When you contact Philips, ensure that your apparatus is nearby and the model number and serial number are available.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. MCM206_12_UM_V2.
