MCM206 Quick Start Guide What’s in the Box? You should find these items upon opening the box.
1 2 Connect the speaker cables. Connect the AC power adapter to the wall socket. Tip See the User Manual for how to connect other equipment to this system. Set clock Important! – In Eco Power Standby mode, press CLOCK to show clock first, then press and hold CLOCK to proceed clock setting. 1 2 3 4 5 6 In standby mode, press and hold CLOCK on the main unit. Press 9 on the main unit to select 12 hour or 24 hour format. Turn - VOLUME + to set the hour. Press CLOCK to confirm.
Play disc 1 2 3 4 5 Press SOURCE to select the disc source. Press ç to open the disc tray. Insert a disc with the printed side facing up, then close the disc tray. To pause/resume play, press ÉÅ. To stop play, press 9 . Play form USB With the micro system, you can use USB flash memory (USB 2.0 or USB1.1), USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to work with this micro system). 1 2 3 Insert the USB device’s USB plug into the on the main unit.
Program and tune to radio stations 1 2 3 Press TunER repeatedly to select FM or MW. Press PROG for more than two seconds to program all available stations in order of waveband. Press 34 to select a preset number. Tip Detailed playback features and additional functions are described in the accompany owner's manual. C Royal Philips Electronics N.V. 2010 All rights reserved. MCM206_12_QSG_V1.0_1021 http://www.philips.
