Register your product and get support at www.philips.
8 Use more of your Micro System 1 Important Safety Notice 2 Your Micro System Introduction What’s in the box Overview of the main unit Overview of the remote control 3 Get started Connect speakers Connect power Install remote control batteries Set clock Turn on 4 Play Play disc Play from USB Listen to an external device 5 Play options Repeat and random play Program tracks Display play information 6 Listen to the radio Tune to a radio station Program radio stations automatically Program radio stations
1 Important Safety Important Safety Instructions a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Caution • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Hearing safety • • • Be careful not to adjust the volume as your hearing adapts. Do not turn up the volume so high that you can’t hear what’s around you.
This product complies with the radio interference requirements of the European Community. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), paper pulp (buffer) and polyethylene (bags, protective foam sheet.
Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.Philips.com/welcome. What’s in the box English 2 Your Micro System Check and identify the contents of your package: • • • • • Main unit Power adapter Loudspeaker boxes x 2 Remote control MP3 link cable Introduction With this apparatus, you can enjoy music from audio discs,external devices, and listen to radio stations.
Overview of the main unit STANDBY-ON SOURCE CLOCK MICRO SYSTEM MCM205 VOLUME DBB DSC TUNING PRESET / ALBUM MP 3 LINK USB DIRECT a Display panel • Display current status. b STANDBY-ON • Turn on the apparatus; switch to standby mode. c • 6 EN Open or close the disc compartment. d • Start or pause play. e DBB • Turn on or off dynamic bass enhancement. f TUNING / • Skip to the previous/next track. • Tune to a radio station.
Search within a track. h • Overview of the remote control English • g Disc compartment USB socket. i MP3 LINK • Jack for an external audio device. j • Headphone socket. k PRESET/ALBUM • Select a preset radio station. • Skip to the previous/next album. l DSC • Select a preset sound setting. m • • Stop play. Erase a program. n VOLUME+/• Adjust volume. • Adjust time. o CLOCK • Set the clock. • View the clock. p Remote control sensor q SOURCE • Select a source.
f DISPLAY • Select display information during play. g VOL +/• Adjust volume. • Adjust time. h Numeric keypad 0-9 • Select a preset radio station. • Select a track from a disc directly. i PROG • Program radio stations. • Program tracks. j SLEEP/TIMER • Set the sleep timer. • Set the alarm timer. • Activate or deactivate timer. k DSC • Select a preset sound setting. l DBB • Turn on or off dynamic bass enhancement. m REPEAT/SHUFFLE • Select repeat play modes. • Select shuffle play modes. n • • Stop play.
Connect power English 3 Get started Caution • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
3 Close the battery compartment. Switch to standby 1 Press to switch the apparatus to standby mode. » The backlight on the display panel is reduced. » The clock (if set) appears on the display panel. To switch the apparatus to Eco Power Standby mode: 1 Set clock 1 In standby mode, press and hold CLOCK on the main unit to activate the clock setting mode. » [SET CLOCK] (set clock) is displayed briefly. Then the hour digits are displayed and begin to blink.
SOURCE STANDBY-ON English 4 Play CLOCK Play disc M I C RO S YSTEM MCM205 VOLUME 1 2 3 Press CD to select the disc source. Press to open the disc tray. DBB DSC TUNING PRESET / ALBUM Insert a disc with the printed side facing up, then close the disc tray. » Play starts automatically. MP 3 LINK • • • • • To pause/resume play, press . To stop play, press . For MP3/WMA files: to select an album, press . To skip to a track, press / . To search within a track, press and hold / .
Display play information 5 Play options 1 Repeat and random play 1 Press REPEAT/SHUFFLE repeatedly to select: • [REP] (repeat): the current track is played repeatedly. • [REP ALL] (repeat all): all tracks are played repeatedly. • [SHUF] (shuffle): all tracks are played randomly. • [SHUF REP ALL] (repeat all randomly): all tracks are played repeatedly in random order. 2 To return to normal play, press REPEAT/ SHUFFLE repeatedly until play mode is no longer displayed.
Program radio stations manually English 6 Listen to the radio Note Tune to a radio station Note • For optimal reception, fully extend and adjust • You can program a maximum of 20 FM radio stations and 10 MW radio stations. 1 2 the position of the FM antenna. 1 2 Press TUNER to select the tuner source. 3 Repeat step 2 to tune to more stations. • To tune to a weak station, press / repeatedly until you find optimal reception. Press PROG to activate program mode.
7 Adjust sound Adjust volume level 1 During play, press VOL +/- to increase/ decrease the volume level. Select a preset sound effect 1 During play, press DSC repeatedly to select: • [POP] (pop) • [JAZZ] (jazz) • [CLASSIC] (classic) • [ROCK] (rock) Enhance bass 1 During play, press DBB to turn on or off dynamic bass enhancement. » If DBB is activated, DBB is displayed. Mute sound 1 During play, press sound.
8 Activate and deactivate the alarm timer 1 Set the sleep timer This unit can switch to standby automatically after a preset period of time. 1 Press SLEEP/TIMER repeatedly until “SLP OFF” is displayed. » When sleep timer is deactivated, disappears on the display. Note • If disc/USB device source is selected and the track cannot be played, tuner is activated automatically. Listen through headphone 1 Set the alarm timer In standby mode, press SLEEP/TIMER repeatedly to activate or deactivate the timer.
9 Product information Speakers Speaker Impedance 4ohm General information-Specs Switching mode power supply Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2X5W RMS Frequency Response 60 - 16kHz, ±3dB Signal to Noise Ratio >62dB Disc Laser Type Disc Diameter Support Disc Semiconductor 12cm/8cm CD-DA, CD-R, CD-RW, MP3-CD, WMA-CD 24Bits / 44.
Maintenance Compatible USB devices: Clean the cabinet • • • • • • • • • • • • • • • • USB flash memory (USB 2.0 or USB1.1) USB flash players (USB 2.0 or USB1.
10 Troubleshooting Caution • Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. Philips.com/support). When you contact Philips, ensure that your apparatus is nearby and the model number and serial number are available.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. MCM205_12_UM_V3.
