MCM166 Quick Start Guide What’s in the Box? You should find these items upon opening the box. Remote Control 1 x MP3 link cable Quick Start Guide User Manual MCM166_05_QSG_Eng.
1 2 Tip Connect the speaker cables. See the User Manual on how to connect other equipment to this system. Connect the AC power cord to the wall socket. FM antenna Speaker (right) Speaker (left) AC power Set clock 1 Press and hold CLOCK (or CLOCK/DISPLAY on the remote control) to activate the clock setting mode. «« The 12 hour or 24 hour format is displayed. 2 Press PROG repeatedly to select 12 hour or 24 hour format. 3 Press CLOCK (or CLOCK/DISPLAY on the remote control) to confirm.
1 Play disc Press SOURCE (or DISC on the remote control) to select the disc source. 2 Lift the top panel to open the disc tray. 3 Insert a disc with the printed side facing up, then close the disc tray. 4 Press ÉÅ to start play. 5 To stop play, press 9. Play USB With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1), USB flash players (USB 2.0 or USB1.1), memory cards (requires an additional card reader to work with this Hi-Fi system).
Listen to radio 1 Press source (or Tun on the remote control) repeatedly to select FM or MW. 2 Press PROG for more than two seconds to program all available stations in order of waveband. 3 Press PRESET/ALBUM +/- (or ABL/PRESET +/- on the remote control) to select a preset number. Tip Detailed play features and additional functions are described in the supplied user manual. C Royal Philips Electronics N.V. 2009 All rights reserved. http://www.philips.com MCM166_05_QSG_V1.0 MCM166_05_QSG_Eng.
