Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety Notice 2 Your Micro Music System Introduction What's in the box Overview of the main unit Overview of the remote control 2 2 3 5 5 5 6 7 3 Get started 8 8 8 8 9 9 9 10 4 Play 11 11 11 11 11 12 5 Listen to the radio 13 13 13 13 13 6 Adjust sound 14 14 14 14 Connect speakers Connect power Prepare the remote control Demonstrate the features Power on Set the clock Select a source Play from disc Play from USB Control play Skip tracks Program tracks Tune to a radio statio
1 Important Safety Read and understand all instructions before you use this micro music system. If damage is caused by failure to follow the instructions, the warranty does not apply. Warning •• Never remove the casing of this apparatus. •• Never lubricate any part of this apparatus. •• Never look into the laser beam inside this apparatus. •• Never place this apparatus on other electrical equipment. •• Keep this apparatus away from direct sunlight, naked flames or heat.
Notice Any changes or modifications made to this device that are not expressly approved by Gibson Innovations may void the user’s authority to operate the equipment. Compliance Hereby, Gibson Innovations declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. You can find the Declaration of Conformity on www.philips.com/support.
How to connect a plug The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows: • Connect the blue wire to the terminal marked N or coloured black. • Connect the brown wire to the terminal marked L or coloured red. • Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow).
2 Your Micro Music System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/support. Introduction With this unit, you can: • enjoy audio from discs, USB devices, and other external devices; • listen to radio stations.
Overview of the main unit ab c kj a d ef i h g • • Turn on the product. Switch to standby mode or ECO power standby mode. b AUDIO IN • Connect external audio devices. c Display panel • Show current status. d e • • • • / Skip to previous/next track. Search within a track/disc. Tune to a radio station. Adjust time. • Start or pause play. f VOLUME knob • Adjust volume. g h 6 l m n i Disc compartment • Open or close the disc compartment. • • Stop play. Erase a program.
Overview of the remote control e a b r c q p d o n e m l f k g h • • Tune to a radio station. Adjust time. • Play tracks randomly. f ALBUM/PRESET / • Select a preset radio station. • Skip to previous/next album. g DISPLAY • Adjust display brightness. • During playback, display the play information. h SLEEP/TIMER • Set sleep timer. • Set alarm timer. i CLOCK • Set the clock. • View clock information. j PROG • Program tracks. • Program radio stations. • Auto store FM radio stations.
3 Get started Connect power Caution Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous laser exposure or other unsafe operation. •• Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. •• Before you connect the AC power cord, ensure that you have completed all other connections. Always follow the instructions in this chapter in sequence.
Demonstrate the features In standby mode, press to demonstrate features of this device. »» The features are displayed one by one across the display panel. • To turn off the demonstration, press again. Power on Note •• The product switches to ECO power standby mode after 15 minutes in standby mode. Switch between standby mode and ECO powerstandby mode: • Press and hold for more than two seconds.
Select a source On the main music system Press SOURCE repeatedly to select a source. • [DISC]: the disc in the disc compartment • [USB]: .mp3 files stored on the connected USB storage device • [TUNER]: the FM tuner • [AUDIO IN]: the audio input through the AUDIO IN socket On the remote control Press CD, FM, USB, orAUDIO IN to select each source directly. • CD: the disc in the disc compartment • FM: the FM tuner • USB: the .
4 Play Play from disc 1 2 3 4 Press CD to select CD source. Press to open the disc compartment. Insert a disc with the label side up. Press to close the disc compartment. »» Play starts automatically. If not, press . Control play / Play from USB / •• Make sure that the USB device contains playable audio content. Insert a USB device into the socket. Press USB to select the USB source. »» Play starts automatically. If not, press . Press to skip to the previous or next track.
When playing an MP3 disc and USB: 1 2 Press / Press to select an album or a folder. / to select a track or a file. Program tracks This function allows you to program 20 tracks in the desired sequence. 1 In stop mode, press PROG to activate the program mode. »» [PROG] (program) and [001 PR 01] are displayed. 2 For MP3 tracks, press album. 3 Press / to select a track, and then press PROG to confirm. 4 Repeat steps 2 to 3 to program more tracks. 5 Press to play the programmed tracks.
5 Listen to the radio Tune to a radio station Program radio stations manually 1 2 Tune to a radio station. 3 Press / to allocate a number from 1–20 to this radio station, and then press PROG to confirm. »» The preset number and the frequency of the preset station are displayed. 4 Repeat steps 1-3 to program more stations. Tip •• Position the antenna as far as possible from TV, VCR, or other radiation source. •• For optimal reception, fully extend and adjust the position of the antenna.
6 Adjust sound The following operations are applicable to all supported media. Select a preset sound effect • Press SOUND repeatedly to select a preset sound effect. • DSC1, DSC2, DSC3, DSC4, and DSC5 Adjust volume level • • On the remote control, press VOL +/repeatedly. On the main unit, rotate the volume knob. Mute sound • Press 14 EN to mute or unmute the sound.
7 Other features Tip •• Alarm timer is not available in AUDIO IN mode. Note Set the alarm timer •• If CD/USB source is selected, but no disc is placed or no USB device is connected, the TUNER source is selected automatically. This product can be used as an alarm clock. You can select the disc, FM, or .mp3 files on a USB storage device as alarm source. Note •• Make sure that you have set the clock correctly. •• If the selected alarm source is unavailable, this product switches to FM mode automatically.
3 Start to play the device (see the device user manual).
8 Product information USB USB Direct Version Disc Note •• Product information is subject to change without prior notice. Amplifier Signal to Noise Ratio Total Harmonic Distortion Aux Input S/N Ratio Maximum 30 W 60 Hz - 20 kHz; ±3 dB ≥75 dBA <1% 600 mV ± 100 mV RMS 22 kohm Speakers Speaker Impedance Speaker Driver Sensitivity Tuning grid Sensitivity Semiconductor 12 cm/8 cm CD-DA, CD-R, CDRW, MP3-CD 24 Bits/44.1 KHz <3% (1 KHz) 20 Hz - 20 kHz (44.
Supported USB formats: • USB or memory file format: FAT12, FAT16, FAT32 (sector size: 512 bytes) • MP3 bit rate (data rate): 32-320 Kbps and variable bit rate • Directory nesting up to a maximum of 8 levels • Number of albums/ folders: maximum 99 • Number of tracks/titles: maximum 999 • File name in Unicode UTF8 (maximum length: 32 bytes) Unsupported USB formats: • Empty albums: an empty album is an album that does not contain MP3/WMA files, and will not be shown in the display.
9 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
Copyright © 2015 Gibson Innovations Limited. Revised Edition © 2017 This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license. MCM1350_05_UM_V2.
