Register your product and get support at www.philips.
English Contents 1 Important Safety Notice 2 Your Micro Hi-Fi System Introduction What’s in the box Overview of the main unit Overview of the remote control 3 Connect Connect speakers Connect power 4 Get started Prepare the remote control Auto install radio stations Set clock Turn on 5 Play Play discs Play from USB 6 Play options Skip to a track Pause/resume play Search within a track Display play information Repeat play Random play Program tracks 7 Adjust volume level and sound effect Adjust volume
1 Important Safety a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Listen at a moderate volume. • Using headphones at a high volume can impair your hearing. This product can produce sounds in decibel ranges that may cause hearing loss for a normal person, even for exposure less than a minute. The higher decibel ranges are offered for those that may have already experienced some hearing loss. • Sound can be deceiving. Over time your hearing ‘comfort level’ adapts to higher volumes of sound.
Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries.
English Overview of the main unit a Disc compartment b IR • Remote control sensor c Display panel • Show current status. j VOLUME +/• Adjust volume. k • l e • / • • • d MP3 LINK • Jack for an external audio device. Headphone jack Stop play or erase a program. • Tune to a radio station. Skip to the previous/next track. Search fast forward or fast backward. Adjust time. • Start or pause play. • Turn on the unit, or switch to standby mode. • Open/close the disc compartment.
Overview of the remote control a p s r REP REP ALL USB MP3 LINK b SHUF c d q q e f g g p FM antenna • Improve FM reception. p f h i q AC MAINS~ • Power cord o j n k CLOCK/DISPLAY m l a POWER • Turn on the unit, or switch to standby mode. b Source selection keys (DISC, TUN, USB,MP3 LINK) • Select a source: DISC, TUNER, USB or MP3 LINK. c SLEEP • Set the sleep timer. d SHUF • Play tracks randomly.
f 3 Connect English e TIMER • Set the alarm timer. / • • • g Search within a track/ disc/USB. Tune to a radio station. Adjust time. Connect speakers / • Skip to the previous/next track. h DBB • Turns on or off dynamic bass enhancement. i • Stop play or erase a program. j VOL +/• Adjust volume. k Numeric keypad • Select a track from a disc directly. l CLOCK/DISPLAY • Set the clock. • View the clock. • During play, select display information.
Connect power 4 Get started Caution Caution • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back of the product. • Before connecting the AC power cord, ensure you have completed all other connections. Note • The type plate is located on the rear of the main unit. 1 Connect the AC power cord to the wall socket.
5 Press CLOCK/DISPLAY to confirm. » The minute digits are displayed and begin to blink. 6 7 Press • If you are not going to use the remote control for a long time, remove the batteries. • Do not use old and new or different types of batteries in combination. • Batteries contain chemical substances, so they / English Note to set the minute. Press CLOCK/DISPLAY to confirm. should be disposed of properly.
5 Play 6 Play options Play discs Skip to a track 1 2 3 Press DISC to select the disc source. For CD: Press 1 Press / to select another track. • To select a track directly, you can also press a key on the numerical keypad. 2 Press ALB/PRESET+/- to select an album or folder. 3 Press / to open the disc compartment. Insert a disc with the printed side facing up, then close the disc door. » Play starts automatically. to select select a track or file.
1 During play, press REP ALL repeatedly to select: » [REP ALL] (repeat all) is displayed: all tracks are played repeatedly. » [REP ALB] (repeat album) is displayed (for MP3 and USB only): the current album is played repeatedly. 2 4 Repeat steps 2 to 3 to select and store all tracks to program. 5 Press to play the programmed tracks. » During play, [PROG] (program) is displayed. • To erase the program, in the stop position, press .
7 Adjust volume level and sound effect Adjust volume level 1 8 Listen to radio Tune to a radio station 1 2 During play, press VOL +/- to increase/ decrease the volume level. Select a preset sound effect During play, press DSC repeatedly to select: • [POP] (pop) • [JAZZ] (jazz) • [ROCK] (rock) • [CLASSIC] (classic) Press and hold / for more than 2 seconds. » [SEARCH] (search) is displayed. » The radio tunes to a station with strong reception automatically. 3 1 Press TUN to select FM.
Note • You can program a maximum of 20 preset radio stations. 1 2 3 4 Tune to a radio station. Press PROG to activate program mode. » [PROG] (program) blinks on the display. Press ALB/PRESET+/- to allocate a number (1 to 20) to this radio station, then press PROG to confirm. » The preset number and the frequency of the preset station are displayed. Repeat the above steps to program other stations. 9 Other features Set the alarm timer This unit can be used as an alarm clock.
Set the sleep timer This unit can switch to standby automatically after a set period of time. 1 2 When the unit is turned on, press SLEEP repeatedly to select a set period of time (in minutes). » When sleep timer is activated, the display shows . Press SLEEP repeatedly until [OFF] is displayed. » When sleep timer is deactivated, disappears on the display. 10 Product information Note • Product information is subject to change without prior notice.
Speakers Speaker Impedance Speaker Driver Sensitivity 4ohm 3.5”woofer+0.
11 Troubleshooting Warning • Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. MCM103B_12_UM_V1.
