Quick start guide

ManualsBrandsPhilips ManualsHi-FiDVD Micro Theatre

MCDB710

Quick Start Guide

What’s in the Box?

You should find these items upon opening the box.

Quick Start Guide

Quick start guide

User Manual

Remote control with two

AAA batteries

User manual

Composite Video Cable

FM/DAB antenna

MCDB710 QUG_05_Eng 2008.5.8, 15:391

Summary of content (4 pages)

PAGE 1
MCDB710 Quick Start Guide What’s in the Box? You should find these items upon opening the box. Quick 1 2 Start G User Quick start guide User manual FM/DAB antenna Composite Video Cable uide MCDB710 QUG_05_Eng 1 Man ual Remote control with two AAA batteries 2008.5.
PAGE 2
1 Connect the speaker cables. Tips – See the User Manual for other TV connection options. – For connecting to a Progressive Scan TV, refer to the user manual for proper connections and detailed setup. 2 Connect the FM/DAB antenna. 3 Connect the composite video to a TV. 4 Connect the power cords of the system and TV. AC power 4 1 FM/DAB antenna 2 Speaker (right) Speaker (left) 3 1 4 Setting up the TV 1 Press SOURCE (DISC on the remote control) to select disc source.
PAGE 3
1 Setting the clock In standby mode, press and hold CLOCK on the remote. 2 When the hour digits flash, turn VOLUME-/+ on the system or press VOL +/- on the remote to set the hours. 3 Press CLOCK again and the minute digits flash. Then turn VOLUME-/+ on the system or press VOL +/- on the remote to set the minutes. 4 Press CLOCK again to confirm the time setting.
PAGE 4
Programming and tuning to radio stations 1 Press SOURCE (FM/DAB on the remote) to select tuner source. 2 Press SCAN on the system (or MODE/SCAN on the remote control) for more than two seconds to program all available stations in order of waveband. 3 Press PRESET+/- (¡ / ™ on the remote) until the desired preset station is displayed. Playing a USB mass storage device With the Hi-Fi system, you can use USB flash memory (USB 2.0 or USB1.1), USB flash players (USB 2.0 or USB1.