Register your product and get support at www.philips.
1 Important Safety Notice 4 4 5 2 Your DVD Micro Theater Introduction What’s in the box Overview of the main unit Overview of the remote control 7 7 7 8 9 3 4 Connect Connect control cable Connect speakers Connect TV (video) Connect an external audio system (optional) Connect FM antenna Connect power 11 11 11 11 13 13 14 Get started Install remote control batteries Set clock Turn on Select the correct source on TV Select the correct TV system Change system menu language Turn on Progressive Scan 1
1 Important Safety Know these safety symbols j Only use attachments/accessories specified by the manufacturer. k Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over. l Unplug this apparatus during lightning storms or when unused for long periods of time.
• Never remove the casing of this apparatus. • Never lubricate any part of this apparatus. • Never place this apparatus on other electrical equipment. • Keep this apparatus away from direct sunlight, naked flames or heat. • Never look into the laser beam inside this apparatus. • Ensure that you always have easy access to the power cord, plug or adaptor to disconnect this apparatus from the power. Hearing safety Listen at a moderate volume. • Using headphones at a high volume can impair your hearing.
other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 525 or 625 progressive scan picture problems, it is recommended that the user switch the connection to the ‘standard definition’ output.
You can play DVD discs with the following region codes: DVD region code E n g lis h 2 Your DVD Micro Theater Countries Europe Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.Philips.com/ welcome.
Overview of the main unit a b j c k d l m e n f o g p q h r i a MAX • Turn on or off instant power boost for sound. b DBB • Turns on or off dynamic bass enhancement. c DSC • Select a preset sound setting. d USB REC • Access the menu to create MP3. e • STANDBY-ON/ECO POWER Turn on the unit, switch to standby mode, or switch to Eco Power Standby. f USB DIRECT • Jack for a USB mass storage device. g i Display panel • Show current status. j MODE • Select repeat play or random play.
r Sockets • Connect headphones • MIC Connect a microphone. • MP3 LINK Audio input jack (3.5mm ) for an external audio device. s VOLUME -/+ • Adjust volume. Overview of the remote control E n g lis h q PULL OPEN • Pull to open the sockets cover. a b c d e f q r s t u g v h w x i y j z { k l m | } n o p ~ € a • Turn on the unit, switch to standby mode, or switch to Eco Power Standby.
b • Open or close the disc compartment. c Source selection keys • Select a source: DISC, FM, USB, AUX or MP3 LINK. d SHUFFLE • Play tracks randomly. s DISC MENU • For DVD, access or exit the disc menu. • For video discs with playback control(PBC): turn on/off PBC. t OK • Confirm a selection. u e REPEAT • Select a repeat play mode. f SYSTEM MENU • Access or exit the system menu. g AUDIO • For DVD, select an audio language. • For VCD, select stereo, mono left, mono right, or mix-mono output.
E n g lis h 3 Connect Connect control cable 1 Connect the supplied control cable to the CONTROL CABLE jacks on the main unit. Connect TV (video) • Option 1: Connect through composite video socket (for a standard TV). • Option 2: Connect through S-Video socket (for a standard TV). • Option 3: Connect through SCART socket (for a standard TV). • Option 4: Connect through component video sockets (for a standard TV or Progressive Scan TV).
Option 2: Connect through S-Video socket 1 Connect an S-video cable (not supplied) to: • • the S-VIDEO socket on this unit. the S-Video socket on the TV. TV S-VIDEO Option 4: Connect through component video sockets Connect a progressive scan TV through component video for higher quality video. 1 Connect component video cables (red/blue/ green - not supplied) to: • the VIDEO OUT (Pr Pb Y) sockets on this unit. • the component input sockets on the TV.
Connect an HDMI cable (not supplied) to: • the HDMI OUT socket on this unit. • the HDMI socket on the TV. Connect FM antenna 1 Connect the supplied FM wire antenna to the FM ANTENNA socket on the unit. TV HDMI IN Connect power Tip Caution • If your TV has only a DVI connection, connect through a HDMI/DVI adaptor. An extra audio connection is needed to complete this connection.
4 Get started Caution 5 • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
5 Play 1 2 Play disc 3 4 Press SYSTEM MENU. Select [General Setup]>[OSD Language], and then press . Select a language, then press OK. To exit the menu, press SYSTEM MENU. Caution • Never look at the laser beam inside the unit. • Risk of product damage! Never play discs with Turn on Progressive Scan If the TV supports progressive scan output, you can connect this unit and the TV through component video connection. (see ‘Connect TV (video)’ > ‘Option 4: Connect through component video sockets’).
View pictures You can view JPEG files as a slide show. 1 Insert a picture disc or connect a USB device. 2 Select a source: • For discs, press DISC. • For USB devices, press USB. 3 For a JPEG picture disc, press to start the slide show. » For a Kodak Picture CD, the slide show starts automatically. Preview pictures 1 During play, press OSD/DISPLAY. » The thumbnails of 12 pictures are displayed. 2 3 Press USB to select the USB source. » The total number of tracks is displayed. » Play starts automatically.
3 select an option. » The selected option is displayed for a while. 2 To resume normal play, press REPEAT repeatedly until [Repeat Off] is displayed. Random play 1 During play, press SHUFFLE. 2 To resume normal play, press SHUFFLE again. 4 Zoom in/out image 1 During video/picture play, press ZOOM repeatedly to zoom in/out the image. • When the image is zoomed in, you can press / / / to pan through the image.
6 Adjust sound Adjust volume 1 During play, press VOL +/- to increase/ decrease the volume. Boost sound power MAX SOUND gives an instant boost to the sound power. 1 Press MAX to turn on or off the sound power boost. » If MAX sound is activated, MAX is displayed. Mute sound 1 During play, press MUTE to mute/unmute sound.
[Off] – disable audio output from the TV. The sound is only output through this apparatus. [All] – the sound is output through both your TV and this apparatus. If the audio format on the disc is not supported, it is downmixed to two-channel sound (Linear-PCM). • [CD Upsampling] Convert the music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality. • [Off] – Turn off CD-upsampling. • [88.
Option Description [4:3 Pillar Box] No stretching of the picture. Black bars are displayed on both sides of the screen. Picture is displayed according to the format of the disc. [Off] 3 4 Select an option, then press OK. Select a setting, then press OK. • To return to the previous menu, press . • To exit the menu, press SYSTEM MENU. Note • See the explanations of the above options in the Note following pages.
[Password] Set or change the password for locked discs and play restricted DVDs. 1) Press the numeric keys to enter ‘000000’ or your last set password at [Old Password] field. 2) Enter the new password at [New Password] field. 3) Enter the new password again at [Confirm PWD] field. 4) Press OK to exit the menu. [Default] Reset all the settings of this apparatus to factory default, except for [Disc Lock], [Password] and [Parental] settings. [Version Info] Display the software version of this apparatus.
3 Repeat step 2 to tune to more stations. • To tune to a weak station, press / repeatedly until you find optimal reception. Note • If the FM radio station transmits RDS (Radio Data System) data, the name of the radio station is displayed. 9 Other features Set the alarm timer This unit can be used as an alarm clock. The DISC, TUNER or AUX is activated to play at a preset time. 1 Ensure that you have set the clock correctly. 2 In standby mode, press and hold TIMER.
2 Press KARAOKE. » The Karaoke setup menu is displayed. 3 3 Select an option and change the setting, then press OK. To exit the menu, press KARAOKE. For other audio devices: 1 Press AUX/MP3 LINK to select the AUX source. 2 Connect the audio cables to • the AUX IN sockets on this unit. • the audio out sockets on the audio device. 3 Start to play the device. (See the device user manual) 4 [Mic] Turn on or off microphone output. • [On] – Turn on microphone. • [Off] – Turn off microphone.
7 Select [Start] to start to convert, then press OK. » Once complete, a new folder is created automatically in the USB device to store all the new MP3 files. • To exit the menu, select [Exit]and then press OK. Note Note • Product information is subject to change without prior notice. Specifications • While you convert, never press any buttons. • DTS CDs and copy-protected CDs cannot be converted. • Write-protected or password-protected USB devices cannot be used to store MP3 files.
Tuner (FM) 87.5 - 108 MHz 50 kHz FM 22 dBf <37 dBf <3% 60 dB >55 dB 180 Hz~10 kHz / ±6 dB 26 dB (1 kHz) 29 dB Speakers Speaker Impedance Speaker Driver Sensitivity 4 ohm 2 x 5.25” woofer + 1.
Maintenance Clean the cabinet • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Clean discs • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. • Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Clean the disc lens • After prolonged use, dirt or dust may accumulate at the disc lens.
Cannot display some files in USB device • The number of folders or files in the USB device has exceeded a certain limit. This phenomenon is not a malfunction. • The formats of these files are not supported. USB device not supported • The USB device is incompatible with the unit. Try another one. Poor radio reception • Increase the distance between the unit and your TV or VCR. • Fully extend the FM antenna. • Connect an outdoor FM antenna instead. Timer does not work • Set the clock correctly.
M MP3 A file format with a sound data compression system. MP3 is the abbreviation of Motion Picture Experts Group 1 (or MPEG-1) Audio Layer 3. With the MP3 format, one CD-R or CD-RW can contain about 10 times more data than a regular CD. Multichannel Usually DVD is specified to have each sound track constitute one sound field. Multichannel refers to a structure of sound tracks having three or more channels.
© 2009 Koninklijke Philips Electronics N.V. All rights reserved. Printed in China MCD802_12_UM_V2.
