MCD728 DVD Micro Theatre Register your product and get support at www.philips.com/welcome pg 001-022_MCD728_93_Eng 1 2007.7.
HDMI (High Definition Multimedia Interface) is a digital interface that allows pure HD digital video transmission without the loss of image quality. The integrated control bus allows system control between the TV set and connected devices like a digital set top box. DVS (Dolby Virtual Speaker) technology creates a highly compelling 5.1-channel listening experience from as few as two speakers, making it an ideal entertainment solution for locations where space for multiple speaker setup is limited.
English Index English ------------------------------------------------ 7 -------------------------------------------------------- 42 3 pg 001-022_MCD728_93_Eng 3 2007.7.
IMPORTANT! – Depending on the DVD or VIDEO CD, some operations may be different or restricted. – Do not push on the disc tray or put any objects other than disc on the disc tray. Doing so may cause the disc player malfunction. – If the inhibit icon (ø) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time. Region Codes DVDs must be labeled as shown below in order to play on this DVD system.
Disc Operations English Using the Disc Menu Depending on the disc, a menu may appear on the TV screen once you load the disc. Resuming playback from the last stopped point (DVD/VCD/CD) ● In stop mode and when a disc has not been removed, pressÉÅ. To select a playback feature or item ● Use 1 2 3 4 and OK or Numeric Keypad (0-9) on the remote. ➜ Playback will start automatically. To cancel resume mode ● In stop mode, press PRESET -/ 9 again.
Repeat A-B (DVD/VCD/CD/MP3/DivX/ WMA) 1 Press A-B at your chosen starting point. 2 Press A-B again at your chosen end point. ➜ The section A and B can be set only within the same chapter/track. ➜ The section will now repeat continuously. 3 To exit the sequence, press A-B again. English Disc Operations For MP3/WMA 1 2 In Stop mode, press DISC MENU to switch the menu between Album and Filelist.
Disc Operations English For Super VCD/VCD/DivX/CD ➜ Single/Total Elapsed: displays the elapsed time of the current single/total track. ➜ Single/Total Remain: displays the remaining time of the current single/total track. ➜ Display Off: switches time display off. Playing MP3/WMA disc IMPORTANT! For DRM protected WMA files, use Windows Media Player 10 (or later) for CD burning/conversion. Visit www.microsoft.com for details about Windows Media Player and WM DRM (Windows Media Digital Rights Management).
Playing JPEG Picture CD General operation 1 To enter the remote key function menu ● Use 1 2 3 4 to highlight “Menu” and press OK. Load a JPEG Picture CD. ➜ The data disc menu appears on the TV screen. 2 Use 3 4 to select a folder and press OK to open the folder. 3 Press 3 4 or use the Numeric Keypad (0-9) to highlight a picture file. 4 Press OK to confirm. ➜ The playback will start from the selected picture to the end of the folder.
Disc Operations English Playing a DivX disc 1 2 This DVD player supports the DivX movie playback that you download from your computer onto a CD-R/RW (see “System Menu Options-DIVX(R) VOD registration code” for more information). Load a DivX disc. ➜ Playback will start automatically. If not press ÉÅ. If the DivX movie contains external subtitles, the subtitle menu will appear on the TV screen for your selection. ● In this case, pressing SUBTITLE on the remote control will turn on or off the subtitle.
1 2 3 Basic operations TV DISPLAY Press SYSTEM MENU to enter the Setup Menu. Set the aspect ratio of the DVD Player according to the TV you have connected. ➜ NORMAL/PS: If you have a normal TV and want both sides of the picture to be trimmed or formatted to fit your TV screen. Press 1 2 to select a page to be set. Press 3 4 to highlight an option. 4 5 Enter its submenu by pressing 2 or OK. 6 Press OK to confirm. Move the cursor by pressing 3 4 to highlight the selected item.
System Menu Options English 1 2 3 DIVX CODE ANALOG AUDIO SETUP Philips provides you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit us at www.divx.com/ vod. In ‘GENERAL SETUP PAGE’, press 3 4 to highlight DIVX Code, then press 2 or OK to ener its submenu and press OK again to confirm. ➜ The registration code will appear.
DOLBY DIGITAL SETUP HDCD The option included in DOLBY DIGITAL SETUP is: “DUAL MONO”. The option included in HDCD (High Definition Compatible Digital) is: “FILTER”. DUAL MONO FILTER Select the setting that matches the number of speakers you have connected. ➜ STEREO: Left mono sound will send output signals to Left speaker and Right mono sound will send output signals to Right speaker. ➜ L-MONO: Left mono sound will send output signals to Left speaker and Right speaker.
System Menu Options English DVD micro system to your TV. ➜ S-VIDEO: Select this if you have connected the DVD micro system to your TV using S-Video jack. ➜ Pr/Cr Pb/Cb Y: Select this if you have connected the DVD micro system to your TV using Component video jacks. SHARPNESS Adjusts the sharpness level. ➜ HIGH, MEDIUM and LOW. Notes: – When the player is set to Y Pb Pr (YUV), some TV may not properly synchronise with the player on the SCART connector.
PREFERENCE PAGE The options included in Preference page are: “TV TYPE”, “AUDIO”, “SUBTITLE”, “DISC MENU”, “PARENTAL”, “DEFAULT” and “PASSWORD SETUP”. ➜ DVDs that are rated above the level you selected will not play unless you enter your fourdigit password and choose a higher level rating. Note: – Some DVDs are not encoded with a rating though the movie rating may be printed on the Disc cover.The rating level feature does not work for such Discs.
System Menu Options English 3 DEFAULT Setting the “DEFAULT” function will reset all options and your personal settings to the factory defaults and all your personal settings will be erased. Press OK to open the page for inputting a new password. Caution! – When this function is activated, all settings will be reset to factory defaults. PASSWORD SETUP The options included in Password Setup page are: “PASSWORD MODE” and “PASSWORD”.
Radio Reception Listening to preset radio stations Tuning to radio stations 1 Press STANDBY-ON B (B on the remote control) to switch on the last selected source. 2 Press SOURCE (TUNER on the remote control) to select TUNER mode. 3 Press and hold ¡ / ™ (1 / 2 on the remote control) until the frequency indication starts to change, then release. ➜ The system automatically tunes to the next strong radio station. In Standby mode, press and hold CLOCK on the remote until the time flashes on the display.
Other Functions English Setting sleep/wake-up timer 5 Press SLEEP/TIMER to confirm the time setting. ➜ ”OFF” flashes on the display screen. 6 Turn VOLUME -/+ clockwise or anticlockwise or press VOL -/+ on the remote to select “ON”. ➜ icon appears on the display screen. Sleep timer setting In power-on mode, the sleep setting enables the system to switch to standby mode automatically at a preset time. 1 2 In power-on mode, press SLEEP/TIMER on the remote repeatedly to select a preset time.
SYSTEM Total output power .............................................. 400W Power supply ........................................... 220V / 50 Hz Rated working power consumption (1/8 rated output power) ........................................................ ≤ 85W AUX input sensitivity ..................................... ≤ 500mV Channel Separation ............................................. ≥ 40dB Distortion ....................................................................... 0.
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution ✔ Check if the AC power cord is properly No power. connected.
The aspect ratio of the screen cannot be changed even though you have set the TV shape. ✔ No sound or distorted sound. ✔ ✔ The micro DVD player does not start playback. ✔ ✔ The aspect ratio is fixed on the DVD disc. Depending on the TV, it may not be possible to change the aspect ratio. Adjust the volume. Check that the speakers are connected correctly. ✔ Replace the speaker cables. ✔ Disconnect the headphones.
Troubleshooting English The remote control does not function. ✔ Select the correct source (DISC or TUNER, for example) before pressing the function button. ✔ Point the remote control at the remote sensor of the unit. ✔ Reduce the distance to the player. ✔ Remove any possible obstacles. ✔ Replace the batteries with new ones. ✔ Check that the batteries are loaded correctly. The display is dark. ✔ Press DIM again. Low hum or buzz sound.
Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9. AUDIO OUT Jacks: Jacks on the back of the DVD System that send audio to another system (TV set, Stereo, etc.).
Language Code English Inupiaq Irish Íslenska Italiano Ivrit Japanese Javanese Kalaallisut Kannada Kashmiri Kazakh Kernewek Khmer Kinyarwanda Kirghiz Komi Korean Kuanyama; Kwanyama Kurdish Lao Latina Latvian Letzeburgesch; Limburgan; Limburger Lingala Lithuanian Luxembourgish; Macedonian Malagasy Magyar Malayalam Maltese Manx Maori Marathi Marshallese Moldavian Mongolian Nauru Navaho; Navajo Ndebele, North Ndebele, South Ndonga Nederlands Nepali Norsk Northern Sami North Ndebele Norwegian Nynorsk; Occitan;
General Information Disc Operations Features .................................................................. Supplied accessories ............................................ Environment information ................................... Installation .............................................................. Maintenance .......................................................... 7 7 7 8 8 Connections Step 1: Placing the speakers and subwoofer ..........................................................
Contents English System Menu Options Basic Operations ................................................ 29 GENERAL SETUP PAGE ........................... 29~30 TV DISPLAY OSD LANGUAGE SCREEN SAVER DIVX CODE AUDIO SETUP PAGE ................................ 30~31 ANALOG AUDIO SETUP SPDIF SETUP DOLBY DIGITAL SETUP 3D PROCESSING HDCD NIGHT MODE VIDEO SETUP PAGE ................................. 31~32 COMPONENT TV MODE PICTURE SETTING HDMI SETUP PREFERENCE PAGE ..........................................
Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/ welcome. Features Your DVD Micro Theatre with 2.1 channel full digital amplifier creates the same dynamic sound qualities that you find in full-fledged cinemas and incorporates some of the best features in home theater technology. Other features include: Built-in Dolby Digital decoder, suppor ting DSC sound setting.
General Information English Installation ● Place the player on a flat, hard, and stable surface. ● In a cabinet, allow about 10cm (4 inches) of free space all around the player for adequate ventilation. ● Do not expose your player to extreme temperatures or humidity. ● The apparatus shall not be exposed to dripping or splashing. ● No objects filled with liquids, such as vases, shall be placed on the apparatus. ● No naked flame sources, such as lighted candles, shall be placed on the apparatus.
English Connections AC Power Subwoofer FM antenna Speaker (right) Speaker (left) Step 1: Placing the speakers and subwoofer IMPORTANT! – The type plate is located at the bottom of the system. – Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made. – Never make or change any connections with the power switched on.
Connections English Step 2: Connecting speakers 1 Connect the speaker wires to the SPEAKERS terminals, right speaker to FRONT (4Ω) R and left speaker to FRONT (4Ω) L. Fully insert the connectors on the cables into the terminals and fasten the hooks to ensure firm connection. Step 3: Connecting the control cable ● Connect the serial port marked “CONTROL CABLE” at the rear of the DVD player to the same port at the rear of the power amplifier with the supplied flat control cable.
1 2 3 Using Component Video jacks (Y Pb Pr) Using S-Video jack IMPORTANT! – The progressive scan video quality is only possible when using Y Pb Pr, and a progressive scan TV is required. IMPORTANT! – If S-Video is used for DVD playback connection, the system’s VIDEO OUT setting will need to be changed accordingly.
Connections English Using an accessory RF modulator IMPORTANT! – If your TV only has a single Antenna In jack (labeled as 75 ohm or RF In), you will need an RF modulator in order to view DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations. 1 Step 5: Connecting FM antenna Connect the supplied FM antenna to the FM (75 Ω) jack. Extend the FM antenna and fix its end to the wall.
Step 6: Connecting the power cord After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connection with the power switched on. Additional: Connecting additional equipment IMPORTANT! – Some discs are copy-protected.You cannot record the disc through a VCR or digital recording device. – When making connections, make sure the colour of cables matches the colour of jacks.
Connections English Connecting to a TV with HDMI Jack E HDMI connects untouched and uncompressed digital transmission for the highest and crispest sound/image quality. It has plug and play capability using only one cable for both audio/video output. ● Use a HDMI cable (not supplied) to connect the HDMI jack on the DVD Player to HDMI IN on a HDMI compatible device (e.g.; TV, Projector, Adaptor). ➜ It may take a while for the DVD player and input device to communicate and initialise.
1 2 English Functional Overview 734 7 8 56 ! 9 0 DVD player and power amplifier 1 STANDBY-ON B – switches the system on or to standby mode. 7 ¡/™ – 2 Display – shows the current status of the DVD player. 3 ÉÅ – – – starts or interrupts disc playback. Disc: skips to the previous/next chapter/title/track. Tuner: tunes to a higher/lower radio frequency. press and hold, then release the key to start automatic search for a radio frequency downward/upward.
Functional Overview English 4 DISPLAY Remote control – 1B – switches the system on or to standby mode. 20 – displays information on TV screen during playback 5 MODE – opens or closes the disc compartment selects various repeat modes or the shuffle play mode for a disc. 3 DISC/TUNER/AUX 6 A-B – – selects the respective sound source for DVD/ AUX/TUNER. exits P-SCAN (progressive scan). (Only for DISC) – repeats playback of a specific section on a disc.
∞ CLOCK # ZOOM – DVD/VCD/Picture CD: enlarges or reduces a picture or active image on the TV screen. – Standby mode sets the system clock. – Playback mode displays the system clock. $ ¡/™ – – Disc: skips to the previous/next chapter/title/ track Tuner: selects a preset radio station. % ÉÅ – starts or interrupts disc playback. ^9 – § DBB – – stops disc playback or erases a program. enables or disables automatic loudness adjustment.
Getting Started English 2 Close the cover. Turn on the TV and set to the correct video-in channel. You should see the blue Philips DVD background screen on the TV. ➜ Usually these channels are between the lowest and highest channels and may be called FRONT, A/V IN, or VIDEO. See your TV manual for more details. ➜ Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel.
Setting up Progressive Scan feature (for Progressive Scan TV only) 9 The progressive scan display twice the number of frames per seconds than interlaced scanning (ordinary normal TV system). With nearly double the number of lines, progressive scan offers higher picture resolution and quality. IMPORTANT! Before enabling the progressive scan feature, you must ensure: 1) Your TV can accept progressive signals, a progressive scan TV is required.
Getting Started English Step 3: Setting language preference Setting the Audio, Subtitle and Disc Menu language You can select your own preferred language settings. This DVD system will automatically switch to the selected language whenever you load a disc. If the language selected is not available on the disc, the disc’s default language will be used instead. The OSD language in the system menu will remain once selected. Setting the OSD Language 1 2 3 1 2 3 Press SYSTEM MENU.
Switching the system on/off ● Press STANDBY-ONB (B on the remote). ➜ “HELLO” is displayed briefly. The system will switch to the last selected source. ● Press DISC, TUNER or AUX on the remote. ➜ The system will switch to the selected source. To switch the system to standby mode ● Press STANDBY-ONB (Bon the remote). ➜ “BYE BYE” is displayed briefly. The interactive sound settings, last selected source and tuner presets will be retained in the player’s memory.
Basic Operations English Note: – See “System Menu Options-AUDIO SETUP PAGE-ANALOG AUDIO SETUP” for more DVS setup options. Dimming the display screen ● Press DIM repeatedly to select different levels of brightness for the display screen. Demonstration mode The system has a demonstration mode that shows the various features offered by the system. To activate the demonstration ● In standby mode, press PRESET–/9 on the system to activate the demo mode. ➜ Demonstration will begin.
Meet Philips at the Internet http://www.philips.com English MCD728 CLASS 1 LASER PRODUCT Printed in China PageBack_MCD728_93 94 PDCC-JS-JW-0731 2007.7.
