MCD710 DVD Micro Theatre Register your product and get support at www.philips.com/welcome User manual Manuel d'utilisation Manual de usuario Benutzerhandbuch Gebruikershandleiding Manuale dell'utente Användarhandbok Brugervejledning pg 001-022_MCD710_12_Eng 1 2007.11.
Italia DICHIARAZIONE DI CONFORMITA’ Si dichiara che l’apparecchio MCD710 Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n. 548. Fatto a Eindhoven Philips Consumer Electronics Philips, Glaslaan 2 5616 JB Eindhoven, The Netherlands Norge Typeskilt finnes på apparatens underside. Observer: Nettbryteren er sekundert innkoplet. Den innebygde netdelen er derfor ikke frakoplet nettet så lenge apparatet er tilsluttet nettkontakten.
Manufactured under license from Dolby Laboratories. "Dolby", "Pro-logic", “Pro-logic II” and the doubleD symbol are trademarks of Dolby Laboratories. MANUFACTURED UNDER LICENSE FROM DIGITAL THEATER SYSTEMS, INC. US PAT. NO 5,451,942,5,956,674, 5,974,380, 5,978,762 AND OTHER WORLDWIDE This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
DK Advarsel: Usynlig laserstråling ved åbning når sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for stråling. Bemærk: Netafbryderen er sekundært indkoblet og ofbryder ikke strømmen fra nettet. Den indbyggede netdel er derfor tilsluttet til lysnettet så længe netstikket sidder i stikkontakten. S Klass 1 laseraparat Varning! Om apparaten används på annat sätt än i denna bruksanvisning specificerats, kan användaren utsättas för osynlig laserstrålning, som överskrider gränsen för laserklass 1.
English Index Français English ------------------------------------------------ 6 Español Français -------------------------------------------- 43 Deutsch Español --------------------------------------------- 81 Nederlands Deutsch ------------------------------------------- 119 Italiano Nederlands -------------------------------------- 158 Svenska Italiano -------------------------------------------- 196 Dansk Svenska ------------------------------------------- 235 Dansk --------------------
Contents English General Information Disc Operations Features .................................................................. Supplied accessories ............................................ Environmental information ................................ Installation .............................................................. Maintenance .......................................................... Hearing Safety .......................................................
Contents English System Menu Options Basic operations ................................................. 29 GENERAL SETUP PAGE ........................... 29~30 TV DISPLAY OSD Language SCREEN SAVER DIVX CODE AUDIO SETUP PAGE ................................ 30~31 DIGITAL AUDIO SETUP DOLBY DIGITAL SETUP 3D PROCESSING HDCD NIGHT MODE VIDEO SETUP PAGE ................................. 31~32 COMPONENT TV MODE PICTURE SETTING PREFERENCE PAGE ...................................
General Information English Congratulations on your purchase and welcome to Philips! Supplied accessories To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. – – – – This product complies with the radio interference requirements of the European Community. If any item is damaged or missing, contact your retailer or Philips. Features Environmental information Your DVD Micro Theatre with 2.
Maintenance Hearing Safety ● When a disc becomes dirty, Listen at a moderate volume. clean it with a cleaning cloth. Wipe the disc from the center out, in a straight line. ● Do not expose the player, batteries or discs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). Always keep the disc tray closed to avoid dust on the lens. ● Do not use solvents such as benzene, thinner, commercially available cleaners, or anti-static spray intended for colour discs.
Connections English AC power Speaker (right) Speaker (left) AC power FM antenna IMPORTANT! – The type plate is located at the bottom of the system. – For users in the U.K.: please follow the instructions on page 2. – Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made. – Never make or change any connections with the power switched on.
Connections Step 2: Connecting TV English Using Composite Video jack IMPORTANT! – You only need to make one video connection from the following options, depending on the capabilities of your TV. – Connect the DVD system directly to the TV. – A SCART connection allows you to use features both Audio and Video features on the DVD Player.
Connections English 2 3 To hear the TV channels through this DVD system, use audio cables (white/red) to connect AUX IN (L/R) jacks to the corresponding AUDIO OUT jacks on the TV. Using an accessory RF modulator IMPORTANT! – If your TV only has a single Antenna In jack (labeled as 75 ohm or RF In), you will need an RF modulator in order to view DVD playback on the TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations.
Step 3: Connecting FM antenna Step 4: Connecting the power cord After everything is connected properly, plug in the AC power cord to the power outlet. Never make or change any connection with the power switched on. ● Connect the supplied FM antenna to the FM (75 Ω) jack. Extend the FM antenna and fix its end to the wall. For better FM stereo reception, connect an external FM antenna (not supplied). Additional: Connecting additional equipment IMPORTANT! – Some discs are copy-protected.
Connections English Viewing and listening to the playback of other equipment A ● Connect the system's AUX IN (R/L) jacks to the AUDIO OUT jacks on the other audio/visual device (such as a TV, VCR, Laser Disc player or cassette deck). Before starting operation, press SOURCE on the front panel to select AUX or press AUX on the remote in order to activate the input source.
English Functional Overview $ 2 4 0 9 1 3 @ 6 5 8 ! # 7 DVD player and power amplifier 1 ECO POWER/STANDBY-ON y – switches on the system or puts it on to Eco power/normal standby mode. 2 Display – shows the current status of the DVD player. 8 – 9 SOURCE – – 3 ÉÅ 0 – – starts or interrupts disc playback. 4 PRESET +/– in tuner mode, selects a preset radio station. 59 ! – – – – stops disc playback or erases a program.
Functional Overview English – Remote control 1 ECO POWER/STANDBY-ON y – – 4 switches on the system or puts it on to Eco power/normal standby mode. – 2 Numeric Keypad (0-9) – 5 inputs a track/title/chapter number of the disc. – 3 PROGRAM – Picture CD: during playback, to select a slide show mode. Tuner: programs preset radio stations. SOURCE to select the respective sound source : TUNER, DISC, USB or AUX. SYSTEM MENU (disc mode only) to enter or exit the system menu bar.
$ MODE ≥ GOTO – – selects various repeat modes or the shuffle play mode for a disc. % SUBTITLE – selects a subtitle language. ^ SLEEP/TIMER Standby mode sets time for switching on the system automatically. – – & – – In DISC mode, to fast search in a disc by entering a time, title, chapter or track. • CLOCK Standby mode *– sets the system clock. Playback mode – displays the system clock. ª0 Power-on mode sets the sleep timer function (auto off).
Getting Started ➜ Usually these channels are between the lowest and highest channels and may be called FRONT, A/V IN, or VIDEO. See your TV manual for more details. ➜ Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel. ➜ Or, the TV Remote Control may have a button or switch that chooses different video modes. ➜ Or, set the TV to channel 3 or 4 if you are using an RF modulator.
6 7 Press 1 2 repeatedly to select "VIDEO SETUP PAGE". Select "TV MODE" to "P-SCAN", then OK to confirm. ➜ The instruction menu appears on the TV. 1 2 Turn off your TV progressive scan mode or turn on to interlaced mode (refer to your TV user manual). Press SYSTEM MENU on the remote to exit the system menu and then DISC and “1” to exit progressive scan. ➜ The DVD blue background screen will appear on the TV.
Getting Started English Step 3: Setting language preference Setting the Audio, Subtitle and Disc Menu language You can select your own preferred language settings. This DVD system will automatically switch to the selected language whenever you load a disc. If the language selected is not available on the disc, the disc’s default language will be used instead. The OSD language in the system menu will remain once selected.
Switching the system on/off ● Press ECO POWER/STANDBY-ONB. ➜ “HELLO” is displayed briefly. The system will switch to the last selected source. ● Press DISC, TUNER, USB or AUX on the remote control. ➜ The system will switch to the selected source. To switch the system to standby mode ● Press ECO POWER/STANDBY-ONB. Switching the system to Eco Power Standby mode ● Press ECO POWER/STANDBY-ON B in active mode.
Basic Operations English Dimming the display screen ● Press DIM repeatedly to select different levels of brightness for the display screen. Demonstration mode The system has a demonstration mode that shows the various features offered by the system. To activate the demonstration ● In standby mode, press 9 on the system to activate the demo mode. ➜ Demonstration will begin. To deactivate the demonstration ● Press 9 on the system again. ➜ “DEMO OFF” is displayed.
IMPORTANT! – Depending on the DVD or VIDEO CD, some operations may be different or restricted. – Do not push on the disc tray or put any objects other than disc on the disc tray. Doing so may cause the disc player malfunction. – If the inhibit icon (ø) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time. Region Codes DVDs must be labeled as shown below in order to play on this DVD system.
Disc Operations English Using the Disc Menu Depending on the disc, a menu may appear on the TV screen once you load the disc. Resuming playback from the last stopped point (DVD/VCD/CD) ● In stop mode and when a disc has not been removed, press ÉÅ. To select a playback feature or item ● Use 1 2 3 4 and OK or Numeric Keypad (0-9) on the remote. ➜ Playback will start automatically. To cancel resume mode ● In stop mode, press 9 again.
Disc Operations 3 1 Press A-B at your chosen starting point. 2 When Filelist is on the screen, press 3 4 to select the files and press PROGRAM to add the files to the program list. 3 4 Press DISC MENU to display the program list. Press A-B again at your chosen end point. ➜ The section A and B can be set only within the same chapter/track. ➜ The section will now repeat continuously. To exit the sequence, press A-B again.
Disc Operations English For Super VCD/VCD/DivX/CD ➜ Single/Total Elapsed: displays the elapsed time of the current single/total track. ➜ Single/Total Remain: displays the remaining time of the current single/total track. ➜ Display Off: switches time display off. Playing MP3/WMA disc IMPORTANT! For DRM protected WMA files, use Windows Media Player 10 (or later) for CD burning/conversion. Visit www.microsoft.com for details about Windows Media Player and WM DRM (Windows Media Digital Rights Management).
Playing JPEG Picture CD General operation 1 To enter the remote key function menu ● Use 1 2 3 4 to highlight “Menu” and press OK. Load a JPEG Picture CD. ➜ The data disc menu appears on the TV screen. 2 Use 3 4 to select a folder and press OK to open the folder. 3 Press 3 4 or use the Numeric Keypad (0-9) to highlight a picture file. 4 Press OK to confirm. ➜ The playback will start from the selected picture to the end of the folder.
Disc Operations English Playback with multi-angles (JPEG) ● During playback, press 1 2 3 4 to rotate the picture on the TV screen. 3: flip the picture vertically. 4: flip the picture horizontally. 1: rotate the picture anti-clockwise. 2: rotate the picture clockwise. Playing a DivX disc 1 2 This DVD player supports the DivX movie playback that you download from your computer onto a CD-R/RW (see “System Menu Options-DIVX(R) VOD registration code” for more information). Load a DivX disc.
Basic operations TV DISPLAY 1 Press SYSTEM MENU to enter the Setup Menu. 2 3 4 5 Press 1 2 to select a page to be set. Set the aspect ratio of the DVD Player according to the TV you have connected. ➜ NORMAL/PS: If you have a normal TV and want both sides of the picture to be trimmed or formatted to fit your TV screen. 6 Press 3 4 to highlight an option. Enter its submenu by pressing 2 or OK. Move the cursor by pressing 3 4 to highlight the selected item.
System Menu Options English DIVX CODE DIGITAL AUDIO SETUP ® 1 Philips provides you the DivX VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit us at www.divx.com/ vod. In ‘GENERAL SETUP PAGE’, press 3 4 to highlight DIVX CODE, then press 2 or OK to ener its submenu and press OK again to confirm. ➜ The registration code will appear.
3D PROCESSING VIDEO SETUP PAGE The option included in 3D PROCESSING page is: “REVERB MODE”. The options included in VIDEO SETUP PAGE are: “COMPONENT”, “TV MODE” and “PICTURE SETTING”. English System Menu Options PICTURE SETTING REVERB MODE Reverb mode provides a virtual surround sound experience using just two speakers. ➜ OFF, CONCERT, LIVING ROOM, HALL, BATHROOM, CAVE, ARENA and CHURCH. HDCD The option included in HDCD (High Definition Compatible Digital) is: “FILTER”.
System Menu Options English 1 2 PICTURE SETTING PREFERENCE PAGE This menu helps you to set the video quality. The options included in Preference page are: “TV Type”, “AUDIO”, “SUBTITLE”, “DISC MENU”, “PARENTAL”, “DEFAULT” and “PASSWORD SETUP”. Press 3 4 to highlight “PICTURE SETTING”. Press 2 or OK to enter PICTURE SETTING. The options included in PICTURE SETTING page are: “SHARPNESS”, “BRIGHTNESS”, “CONTRAST”, “GAMMA”, “HUE”, “SATURATION” and “LUMA DELAY”.
Note: – Some DVDs are not encoded with a rating though the movie rating may be printed on the Disc cover.The rating level feature does not work for such Discs. PASSWORD SETUP The options included in Password Setup page are: “PASSWORD MODE” and “PASSWORD”. Rating explanations 1 KID SAF – Kids material; recommended especially for children and viewers of all ages. 2G – General Audience; recommended as acceptable for viewers of all ages. PASSWORD MODE 3 PG – Parental Guidance suggested.
Other Functions English Radio Reception Listening to preset radio stations ● In tuner mode, press PRESET+/- (or ¡ / ™ on Tuning to radio stations 1 Press ECO POWER/STANDBY-ON y to switch on the last selected source. 2 Press SOURCE (TUNER on the remote) to select TUNER (FM) mode. 3 Press and hold ¡1 / 2™ on the system (or 2 / 3 on the remote control) until the frequency indication starts to change, then release. ➜ The system automatically tunes to the next strong radio station.
1 Setting the clock Wake-up timer setting In Standby mode, press and hold CLOCK on the remote control until the time flashes on the display. ➜ ”CLOCK SET” is displayed briefly. Then, the hour digits flash on the display screen. IMPORTANT! – Before setting the timer, ensure that the clock is set correctly. 2 Turn VOLUME -/+ clockwise or anticlockwise or press VOL +/- on the remote to set the hours. 3 Press CLOCK to confirm. ➜ The minute digits flash on the display screen.
External Sources English Using a non-USB device 1 Connect the system's AUX-IN (L/R) jacks to the AUDIO OUT jacks on another audio/ visual device (such as a VCR, Laser Disc player or cassette desk) using the audio cables (white/ red). 2 Press AUX to select external equipment. ➜ "AUX" is displayed. Note: – All the sound control features (DSC or DBB, for example) are available for selection. – Refer to the operating instructions for the connected equipment for details.
Notes: – If you have not organized MP3/WMA files into any albums on your disc, an album "01" will be automatically assigned for all those files. – Make sure that the file names of MP3 files end with .mp3. and the file names of WMA files end with .wma. – For DRM protected WMA files, use Windows Media Player 10 (or later) for conversion.Visit www.microsoft.com for details about Windows Media Player and WM DRM (Windows Media Digital Rights Management).
Specifications English SYSTEM SPEAKERS AC Power ..................................... 220 – 240 V / 50 Hz Rated working power consumption (1/8 rated output power) ........................................................ ≤ 35W AUX input sensitivity ..................................... ≤ 500mV Channel Separation ............................................. 40dB Distortion ....................................................................... 0.7% Unit Dimensions .........................................
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution ✔ Check if the AC power cord is properly No power. connected.
Troubleshooting English The aspect ratio of the screen cannot be changed even though you have set the TV shape. ✔ The aspect ratio is fixed on the DVD disc. ✔ Depending on the TV, it may not be possible to No sound or distorted sound. ✔ Adjust the volume. ✔ Check that the speakers are connected change the aspect ratio. correctly. ✔ Replace the speaker cables. ✔ Disconnect the headphones. ✔ The system is in pause, slow motion or fast forward/reverse mode, press ÉÅ to resume normal play mode.
The remote control does not function. ✔ ✔ ✔ ✔ ✔ Select the correct source (DISC or TUNER, for example) before pressing the function button. Point the remote control at the remote sensor of the unit. Reduce the distance to the player. Remove any possible obstacles. Replace the batteries with new ones. Check that the batteries are loaded correctly. The display is dark. ✔ Press DIM again. Low hum or buzz sound.
Glossary English Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9. AUDIO OUT Jacks: Jacks on the back of the DVD System that send audio to another system (TV set, Stereo, etc.).
Meet Philips at the Internet http://www.philips.com English Français Español Deutsch Nederlands Italiano Svenska MCD710 Dansk Suomi CLASS 1 LASER PRODUCT Português Polski Printed in China PageBack_MCD710 76 PDCC-ZC-0748 2007.11.
