DVD Micro Theatre MCD708 User manual Manuel d'utilisation Manual del usuario Benutzerhandücher Gebruikershandleidingen Manuale per l'utente Användarhandböckerna Brugermanual pg 001-039_MCD708_-22 1 2006.10.
Important notes for users in the U.K. Italia DICHIARAZIONE DI CONFORMITA’ Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug, proceed as follows: Si dichiara che l’apparecchio MCD708 Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n. 548. 1 2 Remove fuse cover and fuse. Fatto a Eindhoven 3 Refit the fuse cover. Fit new fuse, which should be a BS1362 3Amp, A.S.T.A. or BSI approved type.
DK SF Advarsel: Usynlig laserstråling ved åbning når sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for stråling. Luokan 1 laserlaite Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. Oikeus muutoksiin varataan. Laite ei saa olla alttiina tippu-ja roiskevedelle. Bemærk: Netafbryderen er sekundært indkoblet og ofbryder ikke strømmen fra nettet.
Language Code 4 pg 001-039_MCD708_-22 4 2006.10.
Nederlands -------------------------------------- 145 Italiano -------------------------------------------- 179 Svenska ------------------------------------------- 214 Dansk --------------------------------------------- 248 5 pg 001-039_MCD708_-22 5 2006.10.
Contents English General Information Disc Operations Features .................................................................. Supplied accessories ............................................ Environment information ................................... Installation .............................................................. Maintenance .......................................................... 8 8 8 8 9 Connections Step 1: Placing speakers ....................................
English Contents System Menu Options Basic Operations ................................................ 28 General Setup Page ............................................ 28 TV Display OSD Language Screen Saver DIVX(R) VOD registration code Audio Setup Page ........................................ 29~30 Digital Audio Setup Dolby Digital Setup 3D Processing HDCD Night Mode Video Setup Page ......................................... 30~31 Video Output TV Mode Color Setting Preference Page ..................
General Information English Features Supplied accessories Your DVD Micro Theatre with 2.0 channel full digital amplifier creates the same dynamic sound qualities that you find in full-fledged cinemas and incorporates some of the best features in home theater technology. – – – – Other features include: Built-in DTS and Dolby Digital decoder, supporting Incredible Surround and DSC sound setting.
● Keep the system away from extreme temperatures or humidity. ● Never expose the system to drippings or splashings. ● Never place objects filled with liquids such as vases on the system. ● Never place sources of naked flame such as lighted candles on the system. ● Install the system near the AC outlet where the AC power plug can be reached easily. ● The ventilation should not be impeded by covering the ventilation openings with items, such as newpapers, table-cloths, cur tains, etc.
Connections English AUDIO IN AC power cord S-VIDEO IN TV IN MW antenna VIDEO IN FM antenna AUDIO IN S-VIDEO IN TV IN VIDEO IN Speaker (right) OOFER Speaker (left) LINE OUT 1 2 SUB WOOFER IMPORTANT! – The type plate is located at the bottom of the system. – Before connecting the AC power cord to the wall outlet, ensure that all other connections have already been made. – Never make or change any connections with the power switched on.
Step 2: Connecting speakers English Connections Using SCART jack Connect the speaker cables to the SPEAKERS terminals-right speaker to “R” and left speaker to “L”, coloured (marked) cable to “+” and black (unmarked) cable to “–”. Fully insert the stripped portion of the speaker wire into the terminal as shown. 1 2 Notes: – Ensure that the speaker cables are correctly connected. Improper connections may damage the system in the event of short-circuit.
Connections English Using Component Video jacks (Y Pb Pr) Using S-Video jack IMPORTANT! – The progressive scan video quality is only possible when using Y Pb Pr. A progressive scan TV is required. IMPORTANT! – If S-Video is used for DVD playback connection, the VIDEO OUT setting on the system will have to be changed accordingly.
Using an accessory RF modulator Step 5: Connecting FM/MW antennas IMPORTANT! – If your TV only has a single Antenna In jack (labeled as 75 ohm or RF In), you will need an RF modulator in order to view DVD playback on the TV.Visit your electronics retailer or contact Philips for details on RF modulator availability and operations.
Connections English Step 6: Connecting the power cord After everything has been connected properly, plug in the AC power cord to the power outlet. Never make or change any connections with the power switched on. Additional: Connecting additional equipment IMPORTANT! – Some discs are copy-protected.You cannot record the disc through a VCR or digital recording device. – When making connections, make sure the colour of cables matches the colour of jacks.
1 2 English Functional Overview 6 43 6 758 9 0 DVD player and power amplifier ! – 1 ECO POWER/STANDBY-ON y – switches on the system or puts it on to Eco power/normal standby mode. 2 Display – shows the current status of the DVD player. 3 ÉÅ – press and hold, then release the key to start automatic search for a lower/higher radio frequency. 7 OPEN•CLOSE ç – opens or closes the disc tray. 8 DSC – starts or interrupts disc playback.
Functional Overview English 4 PROG Remote control – – 1B – switches on the system or puts it on to Eco power/normal standby mode. – 20 – – opens or closes the disc tray. 5 GOTO/ST 3 Numeric Keypad (0-9) – – DVD/VCD/CD: enters the program menu. MP3/WMA-CD: adds/deletes a programmed track to/from the program list. Picture CD: selects a slide show mode during playback. Tuner: programs preset radio stations. inputs a track/title/chapter number of the disc.
) DIM @ TU +/- (à / á ) – – – Tuner press to tune to a lower/higher radio frequency in order of waveband. press and hold, then release the key to start automatic search for a lower/higher radio frequency. Disc searches backward/forward in a disc at different speeds. – – adjusts the volume upward/downward. adjusts the hours and minutes in clock/timer setting mode. switches the set timer ON or OFF. – – Disc: skips to the previous/next chapter/title/ track Tuner: selects a preset radio station.
Getting Started English ➜ Usually these channels are between the lowest and highest channels and may be called FRONT, A/V IN, or VIDEO. Refer to your TV user’s manual for more details. ➜ Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel. ➜ Or, the TV Remote Control may have a button or switch that lets you choose between the different video modes. ➜ Or, set the TV to channel 3 or 4 if you are using an RF modulator.
6 7 Press 1 2 repeatedly to select "VIDEO SETUP PAGE". 1 Select "TV MODE" to "P-SCAN", then OK to confirm. ➜ The instruction menu appears on the TV. 2 Turn off your TV progressive scan mode or turn on to interlaced mode (refer to your TV user manual). Press SYSTEM on the remote control to exit the system menu and then press DISC to exit progressive scan. ➜ The DVD blue background screen will appear on the TV.
Getting Started English Step 3: Setting language preference Setting the Audio, Subtitle and Disc Menu language You can select your preferred language settings. This DVD system will automatically switch to the selected language whenever you load a disc. If the language selected is not available on the disc, the default language for the disc will be used instead. The OSD language in the system menu will remain once selected. Setting the OSD Language 1 2 3 4 5 1 Press SYSTEM.
Switching the system on/off ● Press ECO POWER/STANDBY-ON B (or B on the remote control). ➜ “HELLO” is displayed briefly. The system will switch to the last selected source. ● Press DISC, TUNER or AUX on the remote control. ➜ The system will switch to the selected source. To switch the system to standby mode ● Press ECO POWER/STANDBY-ON B (or B on the remote control). ➜ “BYE BYE” is displayed briefly.
Disc Operations English IMPORTANT! – Depending on the DVD or VIDEO CD, some operations may be different or restricted. – Do not push the disc tray or put any objects other than a disc on the disc tray. Doing so may cause the disc player to malfunction. – If the inhibit icon (ø) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time.
English Disc Operations Using the Disc Menu Resuming playback from the last stopped point (DVD/VCD/CD) Depending on the disc, a menu may appear on the TV screen once you load the disc. To select a playback feature or item ● Use 1 2 3 4 and OK, or the Numeric Keypad (0-9) on the remote control. ➜ Playback will start automatically. ● In stop mode and when a disc has not been removed, pressÉÅ. To cancel resume mode ● In stop mode, press PRESET-/9 (or 9 on the remote control) again.
Disc Operations English 1 2 3 For MP3/WMA Repeat A-B (DVD/VCD/CD/MP3/DivX/ WMA) 1 Press A-B on the remote control at the chosen starting point. 2 Press A-B again at the chosen end point. ➜ The section A and B can be set only within the same chapter/track. ➜ The section will now repeat continuously. 3 Press DISC MENU to display the program list. 4 Press PROG to delete unwanted files from the program list. To exit the sequence, press A-B again.
For Super VCD/VCD/DivX/CD ➜ Single/Total Elapsed: displays the elapsed time of the current single/total track. ➜ Single/Total Remain: displays the remaining time of the current single/total track. ➜ Display Off: switches time display off. Playing MP3/WMA disc IMPORTANT! For DRM protected WMA files, use Windows Media Player 10 (or later versions) for CD burning/conversion. Visit www.microsoft.com for details about Windows Media Player and WM DRM (Windows Media Digital Rights Management).
Disc Operations English Playing JPEG Picture CD General operation 1 Load a JPEG Picture CD. ➜ The data disc menu appears on the TV screen. 2 Use 3 4 to select a folder and press OK to open the folder. 3 Press 3 4 or use the Numeric Keypad (0-9) to highlight a picture file. 4 Press OK to confirm. ➜ The playback will start from the selected picture to the end of the folder. During playback, you can: ● Press ¡ / ™ (or CH +/- ¡ / ™ on the remote control) to select another file in the current folder.
English Disc Operations Playback with multi-angles (JPEG) ● During playback, press 1 2 3 4 to rotate the picture on the TV screen. 3: flip the picture vertically. 4: flip the picture horizontally. 1: rotate the picture anti-clockwise. 2: rotate the picture clockwise. Playing a DivX disc 1 2 This DVD player supports the playback of DivX movies downloaded from your computer onto a CD-R/RW (see “System Menu Options-DIVXR VOD registration code” for more information). Load a DivX disc.
System Menu Options English Basic operations 1 2 3 Press SYSTEM on the remote to enter the Setup Menu. Press 1 2 to select a page to be set. Press 3 4 to highlight an option. 4 5 Enter its submenu by pressing 2 or OK. 6 Press OK to confirm. TV Display Set the aspect ratio of the DVD Player according to the TV you have connected. ➜ 4:3 PANSCAN: If you have a normal TV and want both sides of the picture to be trimmed or formatted to fit your TV screen.
DIVXR VOD registration code 1 Philips has provided you with a DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit us at www.divx.com/ vod. In ‘GENERAL SETUP PAGE’, press 3 4 to highlight DIVXRVOD, then press 2 or OK to ener its submenu and press OK again to confirm. ➜ The registration code will appear.
System Menu Options English 3D Processing Night Mode The option included in the 3D Processing menu is: “REVERB MODE”. In this mode, the high volume outputs are softened and low volume outputs are increased to an audible level. This function is useful as you will be able to watch your favourite action movie late at night without disturbing others. ➜ ON: Select ON to level out the volume. This feature is only available for movies with Dolby Digital mode.
TV Mode Preference Page Selects the interlace or P-SCAN video output mode when Pr/Cr Pb/Cb Y is selected. ➜ P-SCAN and INTERLACE. The options included in Preference page are: “TV TYPE”, “AUDIO”, “SUBTITLE”, “DISC MENU”, “PARENTAL” and “DEFAULT”. English System Menu Options In progressive scan mode, you can enjoy high quality picture with less flickers. It only works when you have connected the DVD player's Y Pb Pr jacks to your TV that supports progressive video input.
System Menu Options English ➜ DVDs that are rated above the level you selected will not play unless you enter your fourdigit password and choose a higher rating level. Password Setup Page The options included in Password Setup page are: “PASSWORD MODE” and “PASSWORD”. Note: – Some DVDs are not encoded with a rating though the movie rating may be printed on the Disc cover.The rating level feature does not work for such Discs.
Radio Reception Listening to preset radio stations Tuning to radio stations 1 Press ECO POWER/STANDBY-ON B (or B on the remote control) to switch on the last selected source. 2 Press SOURCE (or TUNER on the remote control) to select TUNER mode. 3 Press TUNER on the remote again to select the desired band: FM or MW. 4 Press and hold ¡ / ™ (or TU +/- à / á on the remote control) until the frequency indication starts to change.
Other Functions English To deactivate the sleep timer Setting the clock 1 In Standby mode, press and hold CLOCK/RDS on the remote control until the time flashes on the display. ➜ ”CLOCK SET” is displayed briefly. Then, the hour digits flash on the display screen. 2 Turn VOLUME -/+ clockwise or anticlockwise or press VOLUME +/- on the remote control to set the hours. 3 Press CLOCK/RDS to confirm. ➜ The minute digits flash on the display screen.
SYSTEM Power supply ............................ 220 – 240 V / 50 Hz Rated working power consumption (1/8 rated output power) ........................................................ ≤ 55W AUX input sensitivity ..................................... ≤ 350mV Channel Separation ............................................. ≥ 40dB Distortion ....................................................................... 0.7% Eco power Standby ................................................
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution ✔ Check if the AC power cord is properly No power. connected.
The aspect ratio of the screen cannot be changed even though you have set the TV shape. ✔ No sound or distorted sound. ✔ ✔ The micro DVD player does not start playback. ✔ Adjust the volume. Check that the speakers are connected correctly. ✔ Replace the speaker cables. ✔ Disconnect the headphones. ✔ If the system is in pause, slow motion or fast forward/reverse mode, press PRESET/ÉÅ (or ÉÅ on the remote) to resume normal play mode.
Troubleshooting English The remote control does not function. ✔ Select the correct source (DISC or TUNER, for example) before pressing the function button. ✔ Point the remote control at the remote sensor of the unit. ✔ Move closer to the player. ✔ Remove any possible obstacles. ✔ Replace the batteries with new ones. ✔ Check that the batteries are loaded correctly. The display is dark. ✔ Press DIM again. Low hum or buzz sound.
Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9. AUDIO OUT Jacks: Jacks on the back of the DVD System that send audio to another system (TV set, Stereo, etc.).
