Specifications

18
Korea
Step 3: Setting the speakers
You can adjust the volume level for individual
speakers. These adjustments let you optimize the
sound according to your surroundings and setup.
1 Press VOL.SEL on the remote repeatedly to
enter volume setting modes for the FL (front
left), FR (front right), CT (center), SL (surround
left, i.e., rear left), SR (surround right, i.e., rear
right) and SW (subwoofer) speakers.
2 Tu r n VOLUME-/+ (or press VOLUME+/- on
the remote) to set the volume for each speaker
to your desired level (adjustment range: 0 to 15).
Notes:
– During setting, if no adjustment is made within 3
seconds, the system will exit the volume setting
mode automatically.
– If you select 2.1CH output, only the FL, FR and
SW speakers are available for individual volume
setting.
Step 4: Setting language
preference
You can select your own preferred language
settings. This DVD system will automatically
switch to the selected language whenever you
load a disc. If the language selected is not
available on the disc, the disc’s default language
will be used instead. The OSD language in the
system menu will remain once selected.
Setting the OSD Language
1 Press SYSTEM.
2 Press 1 2 to select “General Setup Page”.
3 Use 1 2 3 4 on the remote to navigate in
the menu.
Move to “OSD Lang” and press 2.
4 Select a language and press OK.
To e x it from the menu
● Press SYSTEM again.
Connections
pg 001-042_MCD705_33_Kor 2005.9.15, 17:2818