User guide

ManualsBrandsPhilips ManualsVideoMCD703-37B

MCD703

Quick Start Guide

What’s in the Box?

You should find these items upon opening the box.

Composite Video Cable

ediuG

atS

ciu

Control Cable

Remote control with two

AAA batteries

Remote control with two

AA batteries

FM antenna

AM antenna

Quick start guide

laun

User Manual

MCD703 QUG_Eng 2006.2.14, 11:241

Summary of content (4 pages)

PAGE 1
MCD703 Quick Start Guide What’s in the Box? You should find these items upon opening the box. Composite Video Cable Control Cable Qu ick 1 2 Sta rt G uid e FM antenna AM antenna MCD703 QUG_Eng Quick start guide 1 Remote control with two AAA batteries AA batteries User M anual User Manual 2006.2.
PAGE 2
1 Connect the speaker cables. 2 Connect the AM and FM antennas. Tip – See the User Manual for other TV connection options. – For connecting to a Progressive Scan TV, refer to the user manual for proper connections and detailed setup. 3 Connect the control cable. 4 Connect the composite video cable to a TV. 5 Connect the power cords of the system and TV.
PAGE 3
Setting the clock 1 In standby mode, press and hold CLOCK on the remote. 2 When the hour digits flash, turn VOLUME +/- on the system or press VOLUME +/- on the remote to set the hours. 3 Press CLOCK again and the minute digits flash. Then turn VOLUME +/- on the system or press VOLUME +/- on the remote to set the minutes. 4 Press CLOCK again to confirm the time setting.
PAGE 4
Playing a disc 1 Press OPEN•CLOSE (0 on the remote) to open the disc tray and load in a disc, then press the same button again to close the disc tray. ➜ Make sure the label side of the disc is facing up. 2 Playback will start automatically. If not press PLAY/PAUSEÉÅ. 3 To stop playback, press BAND/9 (9 on the remote). Tip Notes for remote control: – Detailed playback features and additional functions are described in the accompany owner's manual.