DVD Micro System MCD700 MCL707 MCD700 MCL707 pg001-031_MCD700_15_Chi 1 28/4/05, 14:44
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro-logic” and the double-D symbol are trademarks of dolby Laboratories. MANUFACTURED UNDER LICENSE FROM DIGITAL THEATER SYSTEMS, INC. US PAT. NO 5,451,942, 5,956,674, 5,974,380, 5,978,762 AND OTHER WORLDWIDE PATENTS ISSUED AND PENDING.“DTS”AND “DTS DIGITAL SURROUND” ARE RESISTERED TRADEMARKS OF DIGITAL THEATER SYSTEMS, INC. COPYRIGHT 1996, 2000 DIGITAL THEATER SYSTEMS, INC. ALL RIGHTS RESERVED.
Index English ---------------------------------------------------------- 4 English ---------------------------------------------- 32 3 pg001-031_MCD700_15_Chi 3 28/4/05, 11:04
Contents English General Information Disc Operations Features ................................................................ 34 Supplied accessories .......................................... 34 Environment information ................................. 34 Installation ............................................................ 34 Maintenance ........................................................ 34 Playable Discs ...................................................... 44 Playing discs .............
Contents System Menu Options English Basic Operations ................................................ 49 General Setup Page ............................................ 49 TV Display OSD Lang Screen Saver Audio Setup Page ........................................ 50~51 SPDIF Setup Dolby Digital Setup 3D Processing HDCD Post DRC Video Setup Page ................................................ 51 Component TV Mode Quality Preference Page ..................................................
General Information Features Installation English Built-in DTS and DolbyR Digital decoder, 2.0channel amplifier ● Place the player on a flat, hard, and stable Additional Component Connections Lets you connect other audio and audio/visual components to the DVD micro system. ● In a cabinet, allow about 10cm (4 inches) of Night Mode Lets you compress the dynamic range, reducing the difference in loudness between different sounds in Dolby Digital mode.
Connections Speaker (left) English Speaker (right) MW antenna FM antenna AC power cord IMPORTANT! – The type plate is located at the bottom of the system. – Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made. – Never make or change any connections with the power switched on. 1 2 For MCD700 Connecting the speakers Connect the speakers to the SPEAKERS (8Ω) terminals with two speaker cables.
Connections ● Connect the VIDEO OUTPUT jack to the Connecting antennas English MW Indoor Loop Antenna Connect the supplied MW loop antenna’s wires to AM AERIAL jack. Place the antenna on a shelf or attach it to a stand or wall. 1 2 FM Indoor Antenna It is unnecessary to connect the FM pigtail antenna since it is fixed to the main unit. Extend the FM antenna and fix its ends to the wall. video input jack on the TV using a video cable (yellow).
Connections Recording (digital) Connecting additional equipment IMPORTANT! – Some discs are copy-protected.You cannot record the disc through a VCR or digital recording device. – When making connections, make sure the colour of cables matches the colour of jacks. – Always refer to the owner’s manual of the other equipment for complete connection and usage details.
Functional Overview English 9 0 MCL HI-RESOLUTION TFT DISPLAY ! 4 1 3 2 567 Picture CD ........ during playback, press the control knob upward to select a slide show mode. Tuner .................... press the control knob upward to program preset radio stations. DVD player and power amplifier 1 STANDBY ON B – switches the system on or to standby mode. 2 IR SENSOR – REPEAT•STEREO Disc ....................... press the control knob downward to repeat a track or disc. FM ..........................
Functional Overview 7 BAND/9 Disc: stops disc playback or erases a program. TUNER: switches between MW and FM. Remote control 1B 8 OPEN•CLOSE – – 20 opens or closes the disc compartment. switches the system on/ off. 9 VOLUME -/+ – – – 3 Numeric Keypad (0-9) – 0 – ! – adjusts the volume upward/downward. adjusts the hours and minutes in clock/timer setting mode. switches the set timer ON or OFF.
Functional Overview ¡ SUBTITLE @ TU +/- (à / á ) – English – – Tuner press to tune to a lower/higher radio frequency gradually. press and hold, then release the key to start automatic search for a radio frequency downward/upward. Disc searches backward/forward in a disc at different speeds. # VOLUME +/– – – adjusts the volume upward/downward. adjusts the hours and minutes in clock/timer setting mode. switches the set timer ON or OFF.
Step 1: ➜ Or, you may go to channel 1 on your TV, then press the Channel down button repeatedly until you see the Video In channel. ➜ Or, the TV Remote Control may have a button or switch that chooses different video modes. ➜ Or, set the TV to channel 3 or 4 if you are using an RF modulator. Inserting batteries into the Remote Control 3 1 2 1 2 3 Selecting the colour system that corresponds to your TV Open the battery compartment. This DVD Player is compatible with both NTSC and PAL.
Getting Started Step 3: Setting language preference Setting the Audio, Subtitle and Disc Menu language English You can select your own preferred language settings. This DVD system will automatically switch to the selected language whenever you load a disc. If the language selected is not available on the disc, the disc’s default language will be used instead. The OSD language in the system menu will remain once selected. Setting the OSD Language 1 2 3 1 2 3 Press SYSTEM.
Basic Operations Sound Control DBB, DSC and LOUDNESS sound features cannot be activated at the same time. ● Press DISC, TUNER or AUX on the remote. ➜ The system will switch to the selected source. DBB (Dynamic Bass Boost) To switch the system to standby mode ● Press STANDBY ONB (B on the remote). ➜ “BYE BYE” is displayed briefly. The volume level, interactive sound settings, last selected source and tuner presets will be retained in the player’s memory. DBB enhances the bass response.
Disc Operations English IMPORTANT! – Depending on the DVD or VIDEO CD, some operations may be different or restricted. – Do not push on the disc tray or put any objects other than disc on the disc tray. Doing so may cause the disc player malfunction. – If the inhibit icon (ø) appears on the TV screen when a button is pressed, it means the function is not available on the current disc or at the current time.
Disc Operations Basic playback controls Repeat (DVD/VCD/CD/MP3/WMA) For DVD/VCD/CD ● Press the control knob downward (corresponding to REPEAT•STEREO) or press MODE repeatedly to choose a repeat mode during playback. English ● During playback, press DISC MENU. ➜ If PBC was ON, it will switch to OFF and continue playback. ➜ If PBC was OFF, it will switch to ON and return to menu screen. Pausing playback (DVD/VCD/CD/MP3/ WMA) CHAPTER (DVD) – to repeat playback of the current chapter.
Disc Operations Program (not for Picture CD) Forward/Reverse Searching (DVD/VCD/ CD/MP3/WMA) To select favourite tracks/chapters for playback in preferred sequence. English 1 Press TU +/- (à á) during playback to select the required speed: 2X, 4X, 8X, 16X or 32X (backward or forward). ➜ Sound will be muted. For DVD/VCD/CD 2 To return to normal speed, press PRESET/ ÉÅ (or ÉÅ on the remote).
Disc Operations 3 Press OK to confirm. English Camera Angle (DVD) ● Press ANGLE repeatedly to select different desired angle. Changing the Audio Language (for DVD recorded with multiple languages) ● Press AUDIO repeatedly to select different audio languages. Changing the Audio Channel (for VCD only) 3 4 ● Press AUDIO to select the available audio channels provided by the disc (Mono Left, Mono Right or Stereo). Press 3 4 or use the Numeric Keypad (09) to highlight a track. Press OK to confirm.
Disc Operations Playback selection English During playback, you can: ● Press the control knob to the left/right (corresponding to S/T) or press CH +/(¡ / ™) on the remote to select another file in the current folder. ● Use 1 2 3 4 on the remote to rotate/flip the picture files. ● Press PRESET/ÉÅ (or ÉÅ on the remote) repeatedly to pause/resume playback. ● Press DISC MENU on the remote to switch between Folder and Filelist.
1 2 3 4 5 6 Basic operations TV Display Press SYSTEM to enter the Setup Menu. Set the aspect ratio of the DVD Player according to the TV you have connected. ➜ Normal/PS (panscan): If you have a normal TV and want both sides of the picture to be trimmed or formatted to fit your TV screen. Press 1 2 to select a page to be set. Press 3 4 to highlight an option. Enter its submenu by pressing 2 or OK. Move the cursor by pressing 3 4 to highlight the selected item.
System Menu Options Audio Setup Page English The options included in Audio Setup page are: “SPDIF Setup”, “Dolby Digital Setup”, “3D Processing”, “HDCD” and “Post DRS”. ➜ Stereo: Left mono sound will send output signals to Left speaker and Right mono sound will send output signals to Right speaker. ➜ L-Mono: Left mono sound will send output signals to Left speaker and Right speaker. ➜ R-Mono: Right mono sound will send output signals to Left speaker and Right speaker.
HDCD TV Mode The option included in HDCD (High Definition Compatible Digital) is: “Filter”. Selects interlace or P-SCAN video output mode when Ypbpr is selected. ➜ P-SCAN and Interlace. Note: – P-SCAN is only applicable when you have connected this DVD system to a Progressive Scan TV through the Y Pb/Cb Pr/Cr jacks. Quality This menu helps you to set the video quality. Filter Sets the audio output cutoff frequency point when playing an HDCD disc. ➜ Off, 44.1K and 88.2K.
System Menu Options Preference Page English The options included in Preference page are: “TV Type”, “Audio”, “Subtitle”, “Disc Menu”, “Parental” and “Default”. ➜ DVDs that are rated above the level you selected will not play unless you enter your fourdigit password and choose a higher level rating. Note: – Some DVDs are not encoded with a rating though the movie rating may be printed on the Disc cover. The rating level feature does not work for such Discs.
System Menu Options Password Setup Page English The options included in Password Setup page are: “Password Mode” and “Password”. Password Mode This feature is used to enable/disable password by selecting “ON”/”OFF”. Password Enter your four digit password when a hint is displayed on the screen. The default password is 1234. 1 2 3 4 5 6 7 Press 3 4 to highlight “Password”. Enter its submenu by pressing 2. Press OK to open the page for inputting a new password. Enter the existing 4-digit code.
Other Functions Radio Reception Listening to preset radio stations Tuning to radio stations English 1 2 3 4 Press STANDBY ONy (or y on the remote) to switch on the last selected source. Press SOURCE (or TUNER on the remote) to select TUNER mode. Press BAND/9 (or TUNER on the remote) again to select the desired band: FM or MW (AM). Press and hold the control knob to the left/right (corresponding to S/T) or TU +/- à/ á on the remote until the frequency indication starts to change, then release.
Other Functions 4 Sleep timer setting In power-on mode, the sleep setting enables the system to switch to standby mode automatically at a preset time. 1 2 In power-on mode, press SLEEP/TIMER on the remote repeatedly to select a preset time. ➜ The selections are as follows (time in minutes): 00 ➜ 10 ➜ 20 ➜ 30 ➜ 40 ➜ 50 ➜ 60 ➜ 70 ➜ 80 ➜ 90 ➜ 00 When you reach the desired length of time, stop pressing SLEEP/TIMER. ➜ ”SLEEP” appears.
Specifications English SYSTEM Power supply ........................................... ~220V/50 Hz Rated working power consumption (1/8 rated output power) ........................................................ ≤ 32W AUX input sensitivity ..................................... ≤ 350mV Channel Separation ............................................. ≥ 40dB Distortion ....................................................................... 0.7% SPEAKER Impedance ............................................
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution ✔ Check if the AC power cord is properly No power. connected.
The micro DVD player does not start playback. ✔ ✔ English ✔ ✔ ✔ The DVD micro system does not respond when the buttons are pressed. ✔ Cannot activate some features, such as Angles, Subtitles, or multi-language Audio. ✔ Considerable noise in radio broadcasts. ✔ ✔ ✔ Sound cannot be heard or is of poor quality. Insert a readable disc with the playback side facing down. Check the disc type, colour system and regional code. Check for any scratches or smudges on the disc.
Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9. AUDIO OUT Jacks: Jacks on the back of the DVD System that send audio to another system (TV set, Stereo, etc.).