DVD Micro Theatre MCD510 User manual Manuel d'utilisation Manual del usuario Benutzerhandücher Gebruikershandleidingen Manuale per l'utente Användarhandböckerna Brugermanual pg001-pg040_MCD510_22-Eng 1 2005.9.
Important notes for users in the U.K. Italia DICHIARAZIONE DI CONFORMITA’ Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Si dichiara che l’apparecchio MCD510 Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n. 548. 1 2 Remove fuse cover and fuse. Fatto a Eindhoven 3 Refit the fuse cover. Fix new fuse which should be a BS1362 3 Amp, A.S.T.A. or BSI approved type.
^ ECO POWER 1 RECORD STANDBY-ON BAND CLOCK SET DISPLAY RDS MCD510 MICRO SYSTEM % 2 7 6 iR ALBUM / PRESET TUNING VOLUME SOURCE PROGRAM DSC 0 ! @ TIMER SET ( 3 5 # $ 4 DBB INCREDIBLE SURROUND OPEN/ CLOSE * 9 & 8 DVD/WMA-CD/MP3-CD COMPATIBLE 3 pg001-pg040_MCD510_22-Eng 3 2005.9.
DK SF Advarsel: Usynlig laserstråling ved åbning når sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for stråling. Luokan 1 laserlaite Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. Oikeus muutoksiin varataan. Laite ei saa olla alttiina tippu-ja roiskevedelle. Bemærk: Netafbryderen er sekundært indkoblet og ofbryder ikke strømmen fra nettet.
English Index Français English ------------------------------------------------ 6 Español Français -------------------------------------------- 40 Español --------------------------------------------- 74 Deutsch Manufactured under license from Dolby Laboratories. “Dolby”, “Pro-logic” and the double-D symbol are trademarks of dolby Laboratories.
Contents English General Information Disc Operations Features .................................................................. 8 Discs for playback ................................................ 8 Playing discs ......................................................... 23 Using the disc menu .......................................... 23 Basic playback controls ..................................... 24 Region codes Supplied accessories ............................................
English Contents Tape Operation/Recording Tape playback ...................................................... 33 Rewinding / Fast forwarding ............................ 33 General information on recording ................. 33 Preparation for recording ................................ 34 Synchro start CD recording ............................ 34 One touch recording ......................................... 34 Recording timer ..................................................
General Information English Features Your DVD Micro System with 2-channel full digital amplifier creates the same dynamic sound qualities that you find in full-fledged cinemas and incorporates some of the best features in home theater technology. Additional Component Connections Lets you connect other audio and audio/visual components to the system so you can use the system’s surround sound speakers.
Environmental information Any unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
General Information English Cleaning the disc lens ● After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner. Finding a suitable location ● Place the player on a flat, hard, stable surface.
AUDIO IN S-VIDEO IN TV IN VIDEO IN AUDIO IN English Connections FM wire antenna MW loop antenna S-VIDEO IN TV IN VIDEO IN 4 S-VIDEO OUT SCART OUT VIDEO OUT 3 DIGITAL OUT speaker (right) R LINE OUT speaker (left) FM/MW ANTENNA L FM 75Ω R L AM ANTENNA FM ANTENNA AUX/ CDR IN SUB WOOFER OUT + R L 2 + SPEAKERS 6Ω 5 AC power cord IMPORTANT! -The type plate is located at the rear of the system.
Connections English Step 2: Connecting speakers Connect the speaker wires to the SPEAKERS terminals, right speaker to "R" and left speaker to "L", coloured (marked) wire to "+" and black (unmarked) wire to "-". Fully insert the stripped portion of the speaker wire into the terminal as shown. FM Antenna ● For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL (FM ANTENNA) terminal. Notes: - Ensure that the speaker cables are correctly connected.
Step 4: Connecting TV English Connections Using Composite Video jacks (CVBS) IMPORTANT! – You only need to make one video connection from the following options, depending on the capabilities of your TV system. – Connect the DVD system directly to the TV. – A SCART connection will let you use features both Audio and Video on the DVD Player.
Connections English Using S-Video In jack Using an accessory RF modulator IMPORTANT! – If the picture is distorted, check the Video Output setting. Make sure it is set to ‘S-Video’. (See Setting video preference). IMPORTANT! – If your TV set only has a single Antenna In jack (or labeled as 75 ohm or RF In), you will need a RF modulator in order to view the DVD playback via TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations.
Step 5: Connecting the power cord IMPORTANT! – Never make or change any connection with the power switched on. "AUTO INSTALL – PRESS PLAY TO START" may appear on the display panel when the AC power cord is plugged into the power outlet for the first time. Press ÉÅ on the main unit to store all available radio stations or press Ç to exit (refer to “Tuner Reception”). After everything is connected properly, plug in the AC power cord to the power outlet.
Controls English 1 2 3 ª 4 • § ≥ 5 ≥ ∞ ≤ ¡ ™ ( ) * & ^ £ 6 8 7 0 9 ! @ # /PROG IS DSC % $ 16 pg001-pg040_MCD510_22-Eng 16 2005.9.
Controls on the system @ VOLUME 1 ECO POWER/STANDBY-ON y – – # RECORD to switch the system on or to Eco power/normal standby mode. 2 Display screen – – to view the current status of the system. to select the respective sound source : DISC TUNER, TAPE or AUX. for Tuner ............. to select waveband : FM or MW. for DVD/VCD/CD/MP3-CD displays disc information on the TV screen and system display panel during playback. 5 PROGRAM for VCD/CD/MP3-CD…to program disc tracks. for Tuner .............
Controls English ¡ REPEAT A-B 6 GOTO – for CD: to repeat a specific section within the same track. for DVD/VCD: to repeat a specific section in a disc. to start playback at any chosen time on the disc (for VCD operation with PBC off). 7 ANGLE/PROG for VCD/CD/MP3-CD…to program disc tracks. for Tuner ............. to program preset radio stations. for DVD ............. to view the same scene from different angles if the DVD is recorded with multi-angles. ™ REPEAT – to repeat a track/disc.
IMPORTANT! Before you operate the system, complete the preparation procedures. Switching the system on ● Press ECO POWER/STANDBY-ON 2 or SOURCE. ➜ The system will switch to the last selected source. ● Press DISC, TUNER, TAPE or AUX on the remote control. ➜ The system will switch to the selected source. Switching the system to Eco Power Standby mode ● Press ECO POWER/STANDBY-ON 2 in the active mode. ➜ The system enters Eco power standby (the ECO POWER LED is on) or normal standby with clock display.
Preparations English IMPORTANT! – Make sure to complete the preparation procedures before operating the system. Step 1: Inserting batteries into the remote control 1 2 3 Open the battery compartment. Place two batteries (Type R06 or AA) in the compartment with the correct polarity as indicated by “+” and “–” symbols. Close the cover. Using the remote control to operate the system 1 2 3 Step 2: Setting the clock 1 In standby mode, press and hold CLOCK SET/ RDS on the system. ➜ “SET CLOCK” appears.
To remove the menu Step 3: Setting language preference Press SYSTEM MENU. You can select your preferred language settings so that this DVD Micro System will automatically switch to the language for you whenever you load a disc. If the language selected is not available on the disc, the language set by default will be used instead. But the menu language of the DVD Micro System cannot be changed once selected.
Preparations English – TV Shape – TV System Selects the aspect ratio of the TV to be connected. Allows you to select the color system matching the connected TV set. 4:3 PS (Pan and Scan mode ) – If you have a conventional TV set and your DVD is not formatted for widescreen viewing, use this setting. A wide picture is displayed on the whole TV screen with a portion automatically cut off. NTSC – If the connected TV is NTSC system, select this mode.
IMPORTANT! – This system is designed for regular discs. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc., as offered on the market, because they may jam the disc mechanism. – Do not move the system during playback. Doing so may damage the system. – DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc matches the regional code of your player.
Disc Operations English Basic playback controls Pausing playback 1 During playback, press 38 (PLAY/PAUSE 38 on the remote). ➜ Playback will pause and sound will be muted. 2 To resume normal playback, press 38 (PLAY/ PAUSE 38 on the remote) again. Skipping to another title (track)/chapter ● Press TUNING S/T (í/ë on the remote) repeatedly during playback to skip backward or forward. Each press will take the disc to the beginning of the previous or next title (track)/chapter.
Fast search Notes: – This function is not available for DVD discs and VCD 2.0 when PCB is on. – If you open the disc compartment, the program will be cleared. ● Press and hold TUNING 4/¢ (22/33 on the remote) to fast reverse or forward the disc. For DVD/VCD (reverse): 22 X2 p 22 X4 p 22 X8 p 22 X20 p PLAY 3 (forward): 33X2 p 33X4 p 33X8 p 33X20 p PLAY 3 GOTO This function allows you to start playback at any chosen time on the disc.
Disc Operations English Subtitles (DVD) Zoom Zooming allows you to enlarge the video image during playback. 1 Press ZOOM repeatedly to enlarge the playback video image. 2 Press 22/33/5/4 to pan across the TV screen. ● Press SUBTITLE repeatedly to select different subtitle languages. Playing MP3/ WMA/picture disc (Kodak, JPEG) IMPORTANT! – You have to turn on your TV set and set to the correct Video In channel.
English Disc Operations Mixed-mode disc To play a mixed-mode disc, you need to select the playback priority for CD or data files through the system menu. 1 2 Language Video Digital Out PCM 48KHz Priority Night Mode PCM Off CD Off Audio Rating PCM CD Press SYSTEM MENU in the stop mode. Press 1/33 to select Audio and press 4 to move to “Priority”. Then, press OK or 33 to enter its submenu and press 3/4 to select CD or Data. ➜ The contents in the CD format or data contents will be played.
DVD Menu Operations English To display the subtitle (DVD only) Using the system menu For DVDs recorded in multiple languages, you can change the subtitle language during playback, or turn on or off the subtitle display whenever you want. To enter the system menu, you should stop playback first. 1 For example, you can select the language you understand and turn the subtitle on for better understanding. 2,3 4 Press SUBTITLE repeatedly on the remote control during playback.
Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level. The rating levels are from 1 to 8 and are country specific. You can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with alternative scenes. Night Mode - turning On / Off Off Select this when you want to enjoy the surround sound with its full dynamic range. On Select this to level out the volume.
DVD Menu Operations English 6 To change the password Enter or re-enter your 4-digit password using the Numeric Keypad (0-9), and then press OK. The lock icon is closed and the parental control setting is completed. You can change the four-digit code used as Password. To deactivate the rating control function Enter your 4-digit password using the Numeric Keypad (0-9), and then press OK. The lock icon is opened and the parental control setting is turned off.
ECO POWER RECORD STANDBY-ON BAND CLOCK SET DISPLAY RDS English Radio Reception MCD510 MICRO SYSTEM iR ALBUM / PRESET TUNING VOLUME TIMER SET SOURCE PROGRAM DSC DBB INCREDIBLE SURROUND Tuning to radio stations 1 Select TUNER source. ➜ “FM” or “MW” is displayed briefly. 2 Press BAND to select the desired waveband : FM or MW. 3 Press and hold TUNING S or ¢ (ALBUM-/+ 22 / 33 on the remote) and then release it.
Radio Reception English Tuning to preset radio stations ● Press ALBUM/PRESET 4/3 until the desired preset station is displayed. Note: – Some RDS radio station may be transmitting a real time clock at a minute interval. The accuracy of the transmitted time depends on the transmitting RDS radio station. RDS Radio Data System is a service that allows FM stations to show additional information. If and the you are receiving a RDS station, station name are displayed.
ECO POWER RECORD STANDBY-ON BAND CLOCK SET DISPLAY RDS English Tape Operation/Recording MCD510 MICRO SYSTEM iR /PROG ALBUM / PRESET TUNING VOLUME TIMER SET SOURCE IS PROGRAM DSC DSC DBB INCREDIBLE SURROUND OPEN/ CLOSE Tape playback 1 Select TAPE source. TAPE ➜ The display shows “TAPE TAPE” briefly. 2 Press OPEN/CLOSE ç to open the tape door. 3 Insert a recorded tape and close the tape door.
Tape Operation/Recording English Preparation for recording 1 2 3 Recording timer To record from the radio, you will need to use a preset radio station and to set a start (ON) and finish (OFF) time. Select TAPE source. Load a recordable tape into the tape deck with the full spool to the left. Prepare the source to be recorded. DISC – load the disc. TUNER – tune to the desired radio station. AUX – connect external equipment.
ECO POWER RECORD STANDBY-ON BAND CLOCK SET DISPLAY RDS English Clock/Timer MCD510 MICRO SYSTEM iR ALBUM / PRESET TUNING VOLUME /PROG TIMER SET SOURCE PROGRAM DSC DBB INCREDIBLE SURROUND IS Clock setting DSC Activating and deactivating timer See page 20. Timer setting ● The system can be used as an alarm clock, whereby the CD, TUNER or TAPE is switched on at a set time (one time operation). The clock time needs to be set first before the timer can be used.
Specifications English AMPLIFIER Output power .................................... 2 x 25 W RMS* ...................................................................... 2 x 50 W MPO Signal-to-noise ratio ....................................... ≥ 62 dBA Frequency response ......... 63 – 16000 Hz, ± 3 dB Input sensitivity AUX ....................... 0.5 V (max. 2 V) Impedance loudspeakers ......................................... 6 Ω Impedance headphones ........................................
English Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution ✔ Check if the AC power cord is properly No power. connected.
Troubleshooting English Problem Solution The language for the sound or subtitle cannot be changed when playing a DVD. ✔ Multi-language sound or subtitle is not recorded on the DVD. ✔ Changing the language for the sound or subtitle is prohibited on the DVD. No image is output when a function is selected. ✔ Make sure the component is connected correctly. ✔ Press the correct function button for the input source. Sound cannot be heard or is of poor quality ✔ ✔ ✔ ✔ ✔ Poor radio reception.
Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9. AUDIO OUT Jacks: Jacks on the back of the DVD System that send audio to another system (TV set, Stereo, etc.).
