DVD Micro Theatre pg001-pg040_MCD510_21-Eng 1 MCD510 2005.10.
México Es necesario que lea cuidadosamente su instructivo de manejo. PRECAUCIÓN - ADVERTENCIA No abrir, riesgo de choque eléctrico ATENCIÓN Verifique que el voltaje de alimentación sea el requerido para su aparato Para evitar el riesgo de choque eléctrico, no quite la tapa. En caso de requerir servicio, dirijase al personal calificado. Minisistema de Audio MCD510/21 110–127 / 220–240 V; ~50/60 Hz 60 W Philips Mexicana, S.A. de C.V. Av. La Palma No.6 Col.
) ¡ ^ # $ 4 1 T H E AT H R E % 2 0 ! 7 6 @ ( 3 5 * 9 & 8 3 pg001-pg040_MCD510_21-Eng 3 2005.10.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro-logic” and the double-D symbol are trademarks of dolby Laboratories. MANUFACTURED UNDER LICENSE FROM DIGITAL THEATER SYSTEMS, INC. US PAT. NO 5,451,942, 5,956,674, 5,974,380, 5,978,762 AND OTHER WORLDWIDE PATENTS ISSUED AND PENDING. “DTS”AND “DTS DIGITAL SURROUND” ARE RESISTERED TRADEMARKS OF DIGITAL THEATER SYSTEMS, INC. COPYRIGHT 1996, 2000 DIGITAL THEATER SYSTEMS, INC. ALL RIGHTS RESERVED.
English Index Français English ------------------------------------------------ 6 Español Français -------------------------------------------- 41 Español --------------------------------------------- 76 ------------------------------------------------------ 111 5 pg001-pg040_MCD510_21-Eng 5 2005.10.
Contents English General Information Disc Operations Features .................................................................. 8 Discs for playback ................................................ 8 Playing discs ......................................................... 24 Using the disc menu .......................................... 24 Basic playback controls ..................................... 25 Region codes Supplied accessories ............................................
English Contents Tape Operation/Recording Tape playback ...................................................... 34 Rewinding / Fast forwarding ............................ 34 General information on recording ................. 34 Preparation for recording ................................ 35 Synchro start CD recording ............................ 35 One touch recording ......................................... 35 Recording timer ..................................................
General Information English Features Your DVD Micro System with 2-channel full digital amplifier creates the same dynamic sound qualities that you find in full-fledged cinemas and incorporates some of the best features in home theater technology. Additional Component Connections Lets you connect other audio and audio/visual components to the system so you can use the system’s surround sound speakers.
Environmental information Any unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
General Information English Cleaning the disc lens ● After prolonged use, dirt or dust may accumulate at the disc lens. To ensure good playback quality, clean the disc lens with Philips CD Lens Cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner. Finding a suitable location ● Place the player on a flat, hard, stable surface.
English Connections AUDIO IN S-VIDEO IN Cr Cb VIDEO IN FM wire antenna MW loop antenna Y AUDIO IN S-VIDEO IN TV IN VIDEO IN 3 DIGITAL OUT speaker (right) LINE OUT R speaker (left) FM/MW ANTENNA L FM 75Ω L R AM ANTENNA FM ANTENNA AUX/ CDR IN SUB WOOFER OUT + R L + SPEAKERS 6Ω 5 AC power cord IMPORTANT! – The type plate is located at the rear of the system. – Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made.
Connections English Step 2: Connecting speakers 1 FM Antenna 2 Connect the speaker wires to the SPEAKERS terminals, right speaker to "R" and left speaker to "L", coloured (marked) wire to "+" and black (unmarked) wire to "-". Fully insert the stripped portion of the speaker wire into the terminal as shown. ● For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL (FM ANTENNA) terminal. Notes: - Ensure that the speaker cables are correctly connected.
Step 4: Connecting TV English Connections Using Composite Video jacks (CVBS) IMPORTANT! – You only need to make one video connection from the following options, depending on the capabilities of your TV system. – Connect the DVD system directly to the TV.
Connections English Using S-Video In jack Using an accessory RF modulator IMPORTANT! – If the picture is distorted, check the Video Output setting. Make sure it is set to ‘S-Video’. (See Setting video preference). IMPORTANT! – If your TV set only has a single Antenna In jack (or labeled as 75 ohm or RF In), you will need a RF modulator in order to view the DVD playback via TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations.
Step 5: Connecting the power cord IMPORTANT! – Never make or change any connection with the power switched on. "AUTO INSTALL – PRESS PLAY TO START" may appear on the display panel when the AC power cord is plugged into the power outlet for the first time. Press ÉÅ on the main unit to store all available radio stations or press Ç to exit (refer to “Tuner Reception”). After everything is connected properly, plug in the AC power cord to the power outlet.
Controls English 1 2 3 ª 4 • § ≥ 5 ≥ ∞ ≤ ¡ ™ ( ) * & ^ £ 6 8 7 0 9 ! @ # /PROG IS DSC % $ 16 pg001-pg040_MCD510_21-Eng 16 2005.10.
Controls on the system @ VOLUME 1 ECO POWER/STANDBY-ON y – – # RECORD to switch the system on or to Eco power/normal standby mode. 2 Display screen – – to view the current status of the system. to select the respective sound source : DISC TUNER, TAPE or AUX. 4 BAND / DISPLAY to start recording. *for Clock .......... (on the system only) to set the clock function. % iR sensor – infrared sensor for remote control. ^ OPEN•CLOSE ç for Tuner ............. to select waveband : FM or MW.
Controls English – – for MP3, to select an album up or down. for VCD/DVD, to move an enlarged picture left or right. ( AUDIO For VCD…sets Stereo, Mono-Left or MonoRight sound mode. For DVD....selects an audio language. 6 GOTO – to start playback at any chosen time on the disc (for VCD operation with PBC off). 7 ANGLE/PROG for VCD/CD/MP3-CD…to program disc tracks. for Tuner ............. to program preset radio stations. for DVD .............
IMPORTANT! Before you operate the system, complete the preparation procedures. Switching the system on ● Press ECO POWER/STANDBY-ON 2 or SOURCE. ➜ The system will switch to the last selected source. ● Press DISC, TUNER, TAPE or AUX on the remote control. ➜ The system will switch to the selected source. Switching the system to Eco Power Standby mode ● Press ECO POWER/STANDBY-ON 2 in the active mode. ➜ The system enters Eco power standby (the ECO POWER LED is on) or normal standby with clock display.
Basic Functions English Microphone Mixing Connect microphones (not supplied) to the system to sing along with the music source. 1 Connect microphones to MIC jack. ● Before connecting the microphone, set the microphone level with VOL to the lower level to prevent howling sound by turning the MIC VOL knob. 2 Select DISC to start playback. ● Press ECHO to select MIC ON. 3 4 5 6 Adjust the volume level of the source with VOLUME –/+ control. Press ECHO again to select ECHO ON or OFF.
IMPORTANT! – Make sure to complete the preparation procedures before operating the system. Step 1: Inserting batteries into the remote control 1 2 3 Open the battery compartment. Place two batteries (Type R06 or AA) in the compartment with the correct polarity as indicated by “+” and “–” symbols. Close the cover. Using the remote control to operate the system 1 2 3 English Preparations Step 2: Setting the clock 1 In standby mode, press and hold CLOCK SET on the system. ➜ “SET CLOCK” appears.
Preparations English To remove the menu Step 3: Setting language preference Press SYSTEM MENU. You can select your preferred language settings so that this DVD Micro System will automatically switch to the language for you whenever you load a disc. If the language selected is not available on the disc, the language set by default will be used instead. But the menu language of the DVD Micro System cannot be changed once selected.
– TV Shape – TV System Selects the aspect ratio of the TV to be connected. Allows you to select the color system matching the connected TV set. 4:3 PS (Pan and Scan mode ) – If you have a conventional TV set and your DVD is not formatted for widescreen viewing, use this setting. A wide picture is displayed on the whole TV screen with a portion automatically cut off. NTSC – If the connected TV is NTSC system, select this mode. It will change the video signal of a PAL disc and output in NTSC format.
Disc Operations English IMPORTANT! – This system is designed for regular discs. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc., as offered on the market, because they may jam the disc mechanism. – Do not move the system during playback. Doing so may damage the system. – DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc matches the regional code of your player.
Basic playback controls Pausing playback 1 During playback, press 38 (PLAY/PAUSE 38 on the remote). ➜ Playback will pause and sound will be muted. 2 To resume normal playback, press 38 (PLAY/ PAUSE 38 on the remote) again. Skipping to another title (track)/chapter ● Press TUNING S/T (í/ë on the remote) repeatedly during playback to skip backward or forward. Each press will take the disc to the beginning of the previous or next title (track)/chapter.
Disc Operations English Fast search Notes: – This function is not available for DVD discs and VCD 2.0 when PCB is on. – If you open the disc compartment, the program will be cleared. ● Press and hold TUNING 4/¢ (22/33 on the remote) to fast reverse or forward the disc. For DVD/VCD (reverse): 22 X2 p 22 X4 p 22 X8 p 22 X20 p PLAY 3 (forward): 33X2 p 33X4 p 33X8 p 33X20 p PLAY 3 GOTO This function allows you to start playback at any chosen time on the disc.
Subtitles (DVD) Zoom Zooming allows you to enlarge the video image during playback. 1 Press ZOOM repeatedly to enlarge the playback video image. 2 Press 22/33/5/4 to pan across the TV screen. ● Press SUBTITLE repeatedly to select different subtitle languages. Playing MP3/ WMA/picture disc (Kodak, JPEG) IMPORTANT! – You have to turn on your TV set and set to the correct Video In channel.
Disc Operations English Mixed-mode disc To play a mixed-mode disc, you need to select the playback priority for CD or data files through the system menu. 1 2 Language Video Digital Out PCM 48KHz Priority Night Mode PCM Off CD Off Audio Rating PCM CD Press SYSTEM MENU in the stop mode. Press 1/33 to select Audio and press 4 to move to “Priority”. Then, press OK or 33 to enter its submenu and press 3/4 to select CD or Data. ➜ The contents in the CD format or data contents will be played.
To display the subtitle (DVD only) Using the system menu For DVDs recorded in multiple languages, you can change the subtitle language during playback, or turn on or off the subtitle display whenever you want. To enter the system menu, you should stop playback first. 1 For example, you can select the language you understand and turn the subtitle on for better understanding. 2,3 4 Press SUBTITLE repeatedly on the remote control during playback.
DVD Menu Operations English Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level. The rating levels are from 1 to 8 and are country specific. You can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with alternative scenes. Night Mode - turning On / Off Off Select this when you want to enjoy the surround sound with its full dynamic range.
6 To change the password Enter or re-enter your 4-digit password using the Numeric Keypad (0-9), and then press OK. The lock icon is closed and the parental control setting is completed. You can change the four-digit code used as Password. To deactivate the rating control function Enter your 4-digit password using the Numeric Keypad (0-9), and then press OK. The lock icon is opened and the parental control setting is turned off.
Radio Reception English ECO POWER BAND RECORD STANDBY-ON DISPLAY CLOCK SET M C D 5 1 0 M I C RO T H E AT H R E iR ALBUM / PRESET TUNING VOLUME TIMER SET SOURCE PROGRAM DSC DBB INCREDIBLE SURROUND OPEN/ Tuning to radio stations 1 Select TUNER source. ➜ “FM” or “MW” is displayed briefly. 2 Press BAND to select the desired waveband : FM or MW. 3 Press and hold TUNING S or ¢ (ALBUM-/+ 22 / 33 on the remote) and then release it.
English Radio Reception Tuning to preset radio stations ● Press ALBUM/PRESET 4/3 until the desired preset station is displayed. Changing tuning grid (not available for all versions) In North and South America, the frequency step between adjacent channels in the MW band is 10 kHz (9 kHz in some areas). The preset frequency step in the factory is 9 kHz. Changing the tuning grid will erase all previously stored preset radio stations. Press and hold 9 on the system in the tuner mode.
Tape Operation/Recording English ECO POWER BAND RECORD STANDBY-ON DISPLAY CLOCK SET M C D 5 1 0 M I C RO T H E AT H R E iR /PROG ALBUM / PRESET TUNING VOLUME TIMER SET SOURCE IS PROGRAM DSC DSC DBB INCREDIBLE SURROUND OPEN/ CLOSE Tape playback 1 Select TAPE source. TAPE ➜ The display shows “TAPE TAPE” briefly. 2 Press OPEN/CLOSE ç to open the tape door. 3 Insert a recorded tape and close the tape door.
Preparation for recording 1 2 3 Recording timer To record from the radio, you will need to use a preset radio station and to set a start (ON) and finish (OFF) time. Select TAPE source. Load a recordable tape into the tape deck with the full spool to the left. Prepare the source to be recorded. DISC – load the disc. TUNER – tune to the desired radio station. AUX – connect external equipment. 1 Select the preset radio station to record from (refer to “Radio Reception - Tuning to preset radio stations”).
Clock/Timer English ECO POWER BAND RECORD STANDBY-ON DISPLAY CLOCK SET M C D 5 1 0 M I C RO T H E AT H R E iR ALBUM / PRESET TUNING VOLUME /PROG TIMER SET SOURCE PROGRAM DSC DBB INCREDIBLE SURROUND IS Clock setting DSC Activating and deactivating timer See page 21. Timer setting ● The system can be used as an alarm clock, whereby the DISC, TUNER or TAPE is switched on at a set time (one time operation). The clock time needs to be set first before the timer can be used.
AMPLIFIER Output power .................................... 2 x 25 W RMS* ...................................................................... 1000 W PMPO Signal-to-noise ratio ....................................... ≥ 62 dBA Frequency response ......... 63 – 16000 Hz, ± 3 dB Input sensitivity AUX ....................... 0.5 V (max. 2 V) Impedance loudspeakers ......................................... 6 Ω Impedance headphones ........................................ 32 Ω DVD PLAYER Laser Type ............
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution ✔ Check if the AC power cord is properly No power. connected.
Problem Solution The language for the sound or subtitle cannot be changed when playing a DVD. ✔ Multi-language sound or subtitle is not recorded on the DVD. ✔ Changing the language for the sound or subtitle is prohibited on the DVD. No image is output when a function is selected. ✔ Make sure the component is connected correctly. ✔ Press the correct function button for the input source. Sound cannot be heard or is of poor quality ✔ ✔ ✔ ✔ ✔ Poor radio reception.
Glossary English Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9. AUDIO OUT Jacks: Jacks on the back of the DVD System that send audio to another system (TV set, Stereo, etc.).
