MCD305 Quick Start Guide What’s in the Box? You should find these items upon opening the box. Composite Video Cable MW antenna FM antenna Remote control with two AAA batteries 1 User Man ual Quic k St art 2 Guid e DIN OUT cable MCD305 QUG_Eng-93 1 Quick start guide User manual 2005.11.
1 Connect the speaker wires. 2 Tips – A sticker indicating speaker type can be found at the back of each speaker box (FRONT L, FRONT R, CENTER, REAR L and REAR R). Insert the speaker wires by matching the colors of the jacks and the labels on the speaker wires. – See the User Manual for other TV connection options. – For connecting to a Progressive Scan TV, refer to the user manual for proper connections and detailed setup. Connect the subwoofer and the DVD system by using the supplied DIN OUT cable.
Setting the clock 1 In standby mode, press and hold CLOCK on the remote. 2 When the hour digits flash, turn VOLUME-/+ on the system or press VOLUME+/- on the remote to set the hours. 3 Press CLOCK again and the minute digits flash. Then turn VOLUME-/+ on the system or press VOLUME+/- on the remote to set the minutes. 4 Press CLOCK again to confirm the time setting.
Playing a disc 1 Press OPEN /CLOSEç(ç on the remote) to open the disc tray. 2 Load in a disc with the label side facing up, then close the disc door. e P rin t si d OPEN/CLOSE 3 Playback will start automatically. If not, pressÉÅ. 4 To stop playback, press 9. Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote) to select tuner source (FM or MW). 2 Press PROG on the remote for more than two seconds to program all available stations in order of waveband.
