MCD296 DVD Micro Theatre User manual Manuel d'utilisation Manual del usuario Benutzerhandücher Gebruikershandleidingen Manuale per l'utente Användarhandböckerna Brugermanual pg001-pg040_MCD296-22-Eng 1 2007.1.
Important notes for users in the U.K. Italia DICHIARAZIONE DI CONFORMITA’ Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Si dichiara che l’apparecchio MCD296 Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n. 548. 1 2 Remove fuse cover and fuse. Fatto a Eindhoven 3 Refit the fuse cover. Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type.
$ # RECORD PLAY REW F. FWD STOP OPEN PAUSE 5 6 1 3 7 8 4 9 @ 0 2 ! 3 pg001-pg040_MCD296-22-Eng 3 2007.1.
1 4 $ ¡ 5 8 7 9 ) ^ 6 7 8 & @ # * 0 ! ( ™ £ % ≤ 2 3 4 pg001-pg040_MCD296-22-Eng 4 2007.1.
DK SF Advarsel: Usynlig laserstråling ved åbning når sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for stråling. Luokan 1 laserlaite Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. Oikeus muutoksiin varataan. Laite ei saa olla alttiina tippu-ja roiskevedelle. Bemærk: Netafbryderen er sekundært indkoblet og ofbryder ikke strømmen fra nettet.
Language Code Inupiaq Irish Íslenska Italiano Ivrit Japanese Javanese Kalaallisut Kannada Kashmiri Kazakh Kernewek Khmer Kinyarwanda Kirghiz Komi Korean Kuanyama; Kwanyama Kurdish Lao Latina Latvian Letzeburgesch; Limburgan; Limburger Lingala Lithuanian Luxembourgish; Macedonian Malagasy Magyar Malayalam Maltese Manx Maori Marathi Marshallese Moldavian Mongolian Nauru Navaho; Navajo Ndebele, North Ndebele, South Ndonga Nederlands Nepali Norsk Northern Sami North Ndebele Norwegian Nynorsk; Occitan; Provencal
English Index Français English ------------------------------------------------ 6 Español Français -------------------------------------------- 41 Deutsch Español --------------------------------------------- 74 Nederlands Deutsch ------------------------------------------- 107 Italiano Nederlands -------------------------------------- 140 Svenska Italiano -------------------------------------------- 173 Dansk Svenska ------------------------------------------- 206 Dansk --------------------
Contents English General Information Disc Operations Features ................................................................ 10 Discs for playback .............................................. 10 Supplied accessories .......................................... 10 Environmental information .............................. 11 Care and safety information ............................ 11 Playing discs ......................................................... 23 Using the disc menu ...........................
English Contents System Menu Options Basic operations ................................................. 28 SYSTEM SETUP ............................................ 28-30 TV SYSTEM SCREEN SAVER TV TYPE PASSWORD RATING DEFAULT DIVX(R) VOD registration code LANGUAGE SETUP .......................................... 30 VIDEO SETUP .................................................... 30 BRIGHTNESS CONTRAST HUE SATURATION AUDIO SETUP .............................................
General Information English Features Additional Component Connections Lets you connect other audio and audio/visual components to the system so you can use the system’s surround sound speakers. Parental control (rating level) Lets you set a rating level so that your children cannot watch a DVD that has a rating higher than you set. The following formats can’t be supported • The files like *.VMA, *.AAC, *.DLF, *.M3U, *.PLS, *.
Environmental information Any unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialised company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
General Information/Maintenance English Hearing Safety Finding a suitable location ● Place the player on a flat, hard, stable surface. ● Install this unit near the AC outlet and where the AC power plug can be reached easily. Cleaning the head and the tape paths ● To ensure good recording and playback quality, clean the head A, the capstan(s) B, and pressure roller(s) C after every 50 hours of tape operation. ● Use a cotton swab slightly moistened with cleaning fluid or alcohol.
FM antenna MW antenna Speaker (left) LINE OUT L SUB WOOFER OUT R FM aerial 75 Ω COAXIAL Speaker (right) English Connections VIDEO MW aerial S-VIDEO VIDEO OUT R L + – SPEAKER 4Ω AC power cord IMPORTANT! – The type plate is located at the rear of the system. – Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made. – Never make or change any connections with the power switched on. – High voltage! Do not open.
Connections English FM Antenna Step 2: Connecting speakers 1 2 Connect the speaker wires to the SPEAKER terminals, right speaker to "R" and left speaker to "L", coloured (marked) wire to "+" and black (unmarked) wire to "-". Fully insert the stripped portion of the speaker wire into the terminal as shown. ● For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL (FM ANTENNA) terminal. Step 4: Connecting TV Notes: – Ensure that the speaker cables are correctly connected.
Using an accessory RF modulator Using S-Video In jack IMPORTANT! – If your TV set only has a single Antenna In jack (or labelled as 75 ohm or RF In), you will need a RF modulator in order to view the DVD playback via TV. See your electronics retailer or contact Philips for details on RF modulator availability and operations.
Connections C LINE OUT DIGITAL IN R FM aerial 75 Ω L SUB WOOFER OUT IMPORTANT! – Never make or change any connection with the power switched on. COAXIAL English Step 5: Connecting the power cord VIDEO AM aerial VIDEO OUT VIDEO IN AUDIO INPUT AUDIO IN R After everything is connected properly, plug in the AC power cord to the power outlet. Optional: Connecting additional equipment IMPORTANT! – Some discs are copy-protected.You cannot record the disc through a VCR or digital recording device.
Controls on the system 1 ECO POWER/STANDBY-ON y – switches the system on or to Eco power/normal standby mode. infrared sensor for remote control. 3 DISPLAY/CLOCK SET Standby mode *– sets the system clock. Playback mode – displays the system clock. During disc playback – selects a disc information display mode. 4 Mode Selection – – – 5 – 9 ............................. In DISC mode, to stop playback or clear a program. 2; ........................... In DISC mode, to start or interrupt playback.
Controls English 6 DISC MENU (disc mode only) – – DVD/VCD: enters or exits the disc contents menu. VCD2.0: switches the playback control mode on or off . – – – Tuner press to tune to a lower/higher radio frequency gradually. press and hold, then release the key to start automatic search for a radio frequency downward/upward. Disc (not for MP3 CD) searches backward/forward in a disc at different speeds. In DISC mode, to select a movement direction in the disc menu or system menu bar.
IMPORTANT! – Make sure to complete the preparation procedures before operating the system. Step 2: Setting the clock 1 2 Before using the remote control 1 2 3 Pull out the plastic protective sheet. Select the source you wish to control by pressing one of the source select keys on the remote control (for example CD, TUNER). Then select the desired function (for example ÉÅ , à , á).
Preparations English Step 3: Setting video preference PAL – If the connected TV is PAL system, select this mode. It will change the video signal of a NTSC disc and output in PAL format. IMPORTANT! – Make sure you have completed all the necessary connections. (See "Connections-Connecting TV".) AUTO – If the connected TV is multi system, select this mode.The output format will be in accordance with the video signal of the disc. – Setting TV TYPE Select the aspect ratio of the TV to be connected.
Note: The format you select must be available on the disc. If it is not, the setting for TV Type will not affect the picture during playback. OSD LANGUAGE (On-Screen Display) Switches the display language on the TV screen. Select the language from the displayed list. AUDIO LANG (DVD only) Switches the display language of the sound track. Select the language from the displayed list. To exit the menu Press SYSTEM MENU again. SUBTITLE LANG (DVD only) Switches the display language of the subtitle.
Basic Functions English Switching the system on ● Press ECO POWER/STANDBY-ON B on the front panel. ➜ The system will switch to the last selected source. ● Press SOURCE repeatedly (or DISC, TUNER, TAPE or AUX on the remote). ➜ The system will switch to the selected source. Switching the system to Eco Power Standby mode ● Press ECO POWER/STANDBY-ON B (or B on the remote) in the active mode. ➜ The system enters Eco power standby (the ECO POWER LED is on) or normal standby with clock display.
IMPORTANT! – This system is designed for regular discs. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc., as offered on the market, because they may jam the disc mechanism. – Do not move the system during playback. Doing so may damage the system. – DVD discs and players are designed with regional restrictions. Before playing a disc, make sure the disc matches the regional code of your player.
Disc Operations English Zoom (DVD/VCD/JPEG) 1 2 Repeat A-B (DVD/VCD/CD/MP3/WMA) Zooming allows you to enlarge or reduce the video image during playback. Press ZOOM on the remote repeatedly to enlarge or reduce the playback video image. 1 Press REPEAT A-B at your chosen starting point. 2 Press REPEAT A-B again at your chosen end point. ➜ The section A and B can be set only within the same chapter/track. ➜ The section will now repeat continuously. 3 To exit the sequence, press REPEAT A-B again.
Special disc features Forward/Reverse Searching (DVD/VCD/ CD/MP3/WMA) 1 2 Press TUNING 22/33 during playback to select the required speed: X2, X4, X8 or X20 (backward or forward). ➜ Sound will be muted. To return to normal speed, press 2;. Time search & search by chapter/track number (DVD/VCD/CD/MP3/WMA) 1 2 Press GOTO until the time or chapter/track edit box appears. Enter hours, minutes and seconds from left to right in the time edit box using the Numeric Keypad (0-9) on the remote.
Disc Operations English Playing MP3/WMA/JPEG Disc Playing JPEG Picture CD IMPORTANT! – You have to turn on your TV and set to the correct Video In channel. (See "Setting up the TV".) General operation Playing MP3/WMA disc General operation 1 2 Load an MP3/WMA disc. ➜ A data disc menu appears on the TV screen and playback starts automatically from the first track. Press 22 to move to the album column on the left of the TV screen, then use 5/4 to select an album and press OK to open it.
Special JPEG features Playing a DivX disc Zoom picture (JPEG) This DVD player supports the DivX movie playback that you download from your computer onto a CD-R/RW (see “System Menu Options-DIVX(R) VOD registration code” for more information). Load a DivX disc. ➜ Playback will start automatically. If not press ÉÅ. ● During playback, press ZOOM repeatedly to display the picture with different scales (X2, X3, X4, X1/2, X1/3 and X1/4). ● Use 22/33/5/4 to view the zoomed picture.
System Menu Options English Basic operations 1 Press SYSTEM MENU to enter the Setup Menu. 2 3 4 5 Press 22/33 to select a page to be set. 6 Press 5/4 to highlight an option. Enter its submenu by pressing 33 or OK. Move the cursor by pressing 5/4 to highlight the selected item. ➜ In cases of value setting, press 5/4 to adjust values. Press OK to confirm. ➜ ON: In STOP, PAUSE or No DISC mode, if no actions are performed about 3 minutes, the screen saver will be activated.
4 PG 13 – Material is unsuitable for children under age 13. Parental Guidance suggested. RATING Some DVDs may have a parental level assigned to the complete disc or to certain scenes on the disc. This feature lets you set a playback limitation level. The rating levels are from 1 to 8 and are country dependent. You can prohibit the playing of certain discs that are not suitable for your children or have certain discs played with alternative scenes.
System Menu Options English DIVX(R) VOD registration code 1 2 Philips provides you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit us at www.divx.com/ vod. In SYSTEM SETUP page, press 3 4 to highlight DIVX(R) VOD. ➜ The registration code will appear. Use the registration code to purchase or rent the videos from DivX® VOD service at www.divx.com/vod.
English System Menu Options DIGITAL OUT ➜ DIGITAL/OFF: Turns off the digital output. ➜ DIGITAL OUT: If you have connected your DIGITAL OUT to a multi-channel decoder/ receiver. ➜ DIGITAL/PCM: Only if your receiver is not capable of decoding multi-channel audio. DOWNMIX This options allows you to set the stereo analogue output of your DVD Player. ➜ LT/RT: Select this option if your DVD Player is connected to a Dolby Pro Logic decoder.
Radio Reception English Tuning to radio stations 1 2 3 Press SOURCE on the set or TUNER on the remote repeatedly until the desired waveband (FM or MW) is displayed. Press and hold TUNING 22/33 and release the button. ➜ The radio automatically tunes to a station with sufficient reception. Repeat step 2 if necessary until you find the desired station. ● To tune to a weak station, press TUNING 22/33 briefly and repeatedly until you have found optimal reception.
English Radio Reception RDS Radio Data System is a service that allows FM stations to show additional information. If and the you are receiving a RDS station, station name are displayed. When automatic programming is used, RDS stations will be programmed first.
Tape Operation/Recording English General information on recording RECORD PLAY REW F. FWD STOP OPEN PAUSE ● For recording, use only NORMAL (IEC type I) tapes on which the tabs have not yet been broken. This deck is not suitable for recording on METAL (IEC IV) type tapes. ● The best recording level is set automatically. Altering the VOLUME, INCREDIBLE SURROUND or DBB will not affect the recording in progress.
English Tape Operation/Recording Preparation for recording 1 2 3 Select TAPE source. Load a recordable tape into the tape deck with the full spool to the left. Prepare the source to be recorded. CD/VCD/DVD – load the disc. TUNER – tune to the desired radio station. AUX – connect external equipment. When recording is in progress ● To stop recording, press STOP•OPENÇ0. ● It is not possible to listen to another source. ● It is not possible to activate the timer function.
Clock/Timer English 4 Clock setting See "Preparations-Step 2: Setting the clock". Timer setting ● The system can be used as an alarm clock, whereby the last selected source is switched on at a set time (one time operation). The clock time needs to be set first before the timer can be used. 1 In standby mode, press and hold SLEEP/ TIMER on the remote control for more than three seconds. ➜ "SET TIMER" is displayed briefly. Then, the hour digits flash on the display panel.
AMPLIFIER Output power ....................................... 2 x 15 W RMS ............................................................................ 700 W MPO Signal-to-noise ratio ....................................... ≥ 60 dBA Frequency response ......... 63 – 16000 Hz, ± 3 dB Input sensitivity AUX ....................... 0.5 V (max. 2 V) Impedance loudspeakers ......................................... 4 Ω Impedance headphones .................... 32 Ω -1000 Ω DVD PLAYER Laser Type ..................
Troubleshooting English WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution ✔ Check if the AC power cord is properly No power. connected.
Problem Solution The language for the sound or subtitle cannot be changed when playing a DVD. ✔ Multi-language sound or subtitle is not recorded on the DVD. ✔ Changing the language for the sound or subtitle is prohibited on the DVD. No image is output when a function is selected. ✔ Make sure the component is connected correctly. ✔ Press the correct function button for the input source. Sound cannot be heard or is of poor quality ✔ ✔ ✔ ✔ ✔ Poor radio reception.
Glossary English Analog: Sound that has not been turned into numbers. Analog sound varies, while digital sound has specific numerical values. These jacks send audio through two channels, the left and right. Aspect ratio: The ratio of vertical and horizontal sizes of a displayed image. The horizontal vs. vertical ratio of conventional TVs. is 4:3, and that of wide-screens is 16:9. AUDIO OUT Jacks: Jacks on the back of the DVD System that send audio to another system (TV set, Stereo, etc.).
Meet Philips at the Internet http://www.philips.com English Français Español Deutsch Nederlands Italiano Svenska MCD296 Dansk Suomi CLASS 1 LASER PRODUCT Português Polski Printed in China PageBack_MCD296-22 262 PDCC-JS/JW-0704 2007.1.
