MCD288E DVD Micro Theatre Register your product and get support at www.philips.com/welcome User manual Manuel d'utilisation Manual de usuario Benutzerhandbuch Gebruikershandleiding Manuale dell'utente Manual do usuário Uživatelský manual Návod na používanie Felhasználói kézikönyv pg001-pg024_MCD288E-12-Eng-A 1 2007.12.
A Anschließen 1 Tips Schließen Sie die Lautsprecherkabel an (subwoofer). – Weitere Optionen zur Verbindung der Anlage mit Ihrem Fernsehgerät finden Sie in der Bedienungsanleitung. – Zum Anschließen an ein ProgressiveScan-Fernsehgerät bitte im Benutzerhandbuch für ordnungsgemäße Anschlüsse und detaillierte Grundeinstellungen nachschlagen. – Schließen Sie immer erst das DINKabel und dann das Netzkabel an, um eine Beschädigung des Geräts zu vermeiden. 2 Schließen Sie die FM-Antennen an.
B Einrichten Uhrzeiteinstellung WICHTIG! – Zum Einstellen der Uhr im EcoPower-Modus halten Sie STANDBY-ON/ECO POWER 2 am Gerät für mindestens 3 Sekunden lang gedrückt, um zunächst in den normalen Standby-Modus zu wechseln und anschließend anhand der unten aufgeführten Anweisungen fortzufahren. 1 Halten Sie im Standby-Modus die Taste CLOCK am System gedrückt. 2 Wenn die Stundenanzeige blinkt, drücken Sie VOLUME-/+ (VOL+/- auf der Fernbedienung) um die Stunden einzustellen.
C Los geht's Musik hören & mehr! Disc abspielen e 1 d Legen Sie eine Disc in das Disc-Fach. ➜ Achten Sie darauf, dass das Etikett oben liegt. ➜ Stellen Sie sicher, dass sich keine weitere Disc im Disc-Fach befindet. P rin ted S i 2 Die Wiedergabe beginnt automatisch. Wenn nicht, drücken SieÉÅ. 3 Drücken Sie 9 Um die Wiedergabe zu stoppen. Programmieren und Radiosender einstellen 1 Drücken Sie SOURCE (TUNER auf der Fernbedienung) , um die Radio-Quelle auszuwählen.
Punto A Collega 1 Collegare i cavi degli altoparlanti (subwoofer). Tips – Cfr. il Manuale Utente per ulteriori opzioni di collegamento TV. – Per collegarsi a una TV con Scansione Progressiva, fare riferimento al manuale per effettuare collegamenti corretti e per i particolari dell'impostazione. – Non collegare mai il cavo di alimentazione CA prima del collegamento del cavo DIN per evitare danni all'apparecchio. 2 Collegare le antenne FM. 3 Collegare il Cavo A/V alla TV.
Punto B Imposta Impostare l'orologio IMPORTANT! – Per impostare il timer nella modalità Eco Power, premere e tenere premuto il tasto STANDBY-ON/ ECO POWER 2 sul dispositivo, per almeno 3 secondi, per tornare alla normale modalità di standby prima di iniziare le procedure riportate in basso. 1 In modalità standby, tenere premuto CLOCK sul sistema. 2 Quando le cifre relative all'ora lampeggiano, premere VOLUME-/+ (VOL+/- sul telecomando) per eseguirne l'opportuna impostazione.
Punto C Divertiti Riprodurre un disco e 1 d Inserire un disco nel caricatore disco. ➜ Assicurarsi che il lato con l'etichetta sia rivolto verso di voi. ➜ Assicurarsi di aver rimosso altri dischi dal caricatore. P rin ted S i 2 Se la riproduzione non si avvia automaticamente, premereÉÅ. 3 Premere 9 per arrestare la riproduzione. Programmare e sintonizzare le stazioni radio 1 Premere SOURCE (TUNER sul telecomando) per selezionare la fonte tuner.
Important notes for users in the U.K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 2 Remove fuse cover and fuse. 3 Refit the fuse cover. Italia DICHIARAZIONE DI CONFORMITA’ Si dichiara che l’apparecchio MCD288E Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n. 548. Fatto a Eindhoven Fix new fuse which should be a BS1362 3 Amp, A.S.T.A. or BSI approved type.
pg001-pg024_MCD288E-12-Eng-A 9 2007.12.
1 4 $ ¡ 5 8 7 9 USB/AUX ) ^ 6 DIM 7 8 & @ # * 0 ! ( ™ £ % ≤ 2 3 10 pg001-pg024_MCD288E-12-Eng-A 10 2007.12.
DK SF Advarsel: Usynlig laserstråling ved åbning når sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for stråling. Luokan 1 laserlaite Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. Oikeus muutoksiin varataan. Laite ei saa olla alttiina tippu-ja roiskevedelle. Bemærk: Netafbryderen er sekundært indkoblet og ofbryder ikke strømmen fra nettet.
Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. HDMI (High Definition Multimedia Interface) is a digital interface that allows pure HD digital video transmission without the loss of image quality. The integrated control bus allows system control between the TV set and connected devices like a digital set top box. .
English Français -------------------------------------------- 38 Italiano -------------------------------------------- 139 Português ---------------------------------------- 165 13 Deutsch Slovensky Magyar -------------------------------------------- 240 13 pg001-pg024_MCD288E-12-Eng-A Nederlands Slovensky ---------------------------------------- 215 Magyar Česky ---------------------------------------------- 190 Italiano Nederlands -------------------------------------- 114 Português Deutsc
Contents English General Information Basic Functions Discs for playback .............................................. 16 Region Codes .................................................. 16 Supplied accessories .......................................... 16 Environmental information .............................. 16 Care and safety information ............................ 16 Hearing Safety ..................................................... 17 Switching the system on/off .............................
English Contents System Menu Options Basic operations ................................................. 29 GENERAL SETUP PAGE .................................. 29 TV DISPLAY ..................................................... 29 OSD LANGUAGE .......................................... 29 SCREEN SAVER .............................................. 29 DIVX(R) VOD registration code ................. 29 AUDIO SETUP PAGE ....................................... 29 ANALOG AUDIO SETUP ...........................
General Information English Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/ welcome. Notes: – For mixed mode discs, only one mode will be selected for playback according to the recording format. – If you are having trouble playing a certain disc, remove the disc and try a different one. Improperly formatted discs will not play on this system.
Avoid condensation problem ● The lens may cloud over when the player is suddenly moved from cold to warm surroundings, making it impossible to play a disc. Leave the player in the warm environment until the moisture evaporates. Do not block the vents ● Do not operate the system in an enclosed cabinet and allow about 10 cm (4 inches) of free space all around the player for adequate ventilation.
Installation English IMPORTANT! – The type plate is located at the rear of the system. – Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made. – Never make or change any connections with the power switched on. Step 3: Connecting TV IMPORTANT! – You only need to make one video connection from the following options, depending on the capabilities of your TV. – Connect the DVD system directly to the TV.
Using SCART jack AUDIO IN 1 Use component video cables (with one end providing a 3.5" connector while the other end providing three red/blue/green connectors - not supplied) to connect the DVD system's COMPONENT jack to the corresponding Component video input jacks (or labeled as Y Pb/Cb Pr/Cr or YUV) on the TV. 2 If you are using a Progressive Scan TV (TV must indicate Progressive Scan or ProScan capability), to activate TV Progressive Scan, please refer to your TV user manual.
Installation English 3 Push the stand down into the slots until you hear a click. 4 Place the set upright on the desktop with the support of the stand. 5 Extend the bracket on the back of each front speaker as shown so that the front speakers can stand firmly on the desktop. 6 Place the subwoofer on the floor near an AC outlet. Note: – To remove the stand from the set, while pressing down PRESS4 , pull the stand out from the slots.
Controls on the system 1 ECO POWER/STANDBY ON B – to switch the system on or to Eco power/normal standby mode. – USB DIRECT is the jack for the external USB mass storage device. @ SLIDE OPEN 4 – 2 iR sensor – ! English Controls infrared sensor for remote control. slides down to expose some buttons and jacks on the front panel. 3 CLOCK – 4 Mode Selection – – – 9 ............................. In DISC/USB mode, to stop playback or clear a program. .........................................
Controls English 8 3/4 ¡ A-B 9 OK – – ™ AUDIO – In DISC mode, to select a movement direction in the disc menu or system menu bar. to exit or confirm the selection. 0 í/ë – – Disc: skips to the previous/next chapter/title/ track. Tuner: selects a preset radio station. !9 – In DISC mode, to stop playback or clear a program. @ 2; – In DISC mode, to start or interrupt playback. – – – – adjusts the volume upward/downward. adjusts the hours and minutes in clock/timer setting mode.
IMPORTANT! – Make sure to complete the preparation procedures before operating the system. Step 3: Setting video preference IMPORTANT! – Make sure you have completed all the necessary connections. (See "Connections-Connecting TV".) Step 1: Using the remote control 1 2 Pull out the plastic protective sheet. 1 Select the source you wish to control by pressing one of the source select keys on the remote control (for example DISC, TUNER). In stop mode or during playback, press SYSTEM MENU.
Preparations English 7 Select "TV MODE" to "P-SCAN", then OK to confirm. ➜ The instruction menu appears on the TV. 2 Press SYSTEM MENU on the remote to exit the system menu and then DISC and “1” to exit progressive scan. ➜ The DVD blue background screen will appear. Step 4: Setting language preference 8 9 1 In stop mode or during playback, press SYSTEM MENU. 2 Press à/á/5/4 on the remote control to select your preferred option. Press à/á to highlight OK in the menu and press OK to confirm.
Switching the system on/off ● Press ECO POWER/STANDBY-ON B (B on the remote control). ➜ “HELLO” is displayed briefly. The system will switch to the last selected source. ● Press DISC, TUNER or USB/AUX on the remote. ➜ The system will switch to the selected source. To switch the system to standby mode ● Press ECO POWER/STANDBY-ON B (B on the remote control). ➜ The interactive sound settings, last selected source and tuner presets will be retained in the player’s memory.
Disc Operations English Selecting a track/chapter/title (DVD/ VCD/CD/MP3/WMA) Playing discs 1 Insert a disc into the slot loader. ➜ Make sure the label side is facing you. ➜ Make sure you have removed any other disc from the slot loader. 2 Playback will start automatically (depending on the disc type). ➜ If a disc menu appears on the TV, see "Using the Disc Menu". ➜ If the disc is locked by parental control, you must enter your four-digit password. At any time, simply press 9 to stop playback.
Slow Motion (DVD/VCD) English Disc Operations Camera Angle (DVD) 1 Press 4 on the remote during playback to select the required forward speed: 1/2, 1/4, 1/8 or 1/16. ➜ Sound will be muted. 2 To return to normal speed, press 2;. Forward/Reverse Searching (DVD/VCD/ CD) 1 Press TUNING 22/33 during playback to select the required speed: X2, X4, X8, X16 or X32 (backward or forward). ➜ Sound will be muted. 2 To return to normal speed, press 2;.
Disc Operations English Special JPEG features Zoom picture (JPEG) ● During playback, press ZOOM repeatedly to display the picture with different scales (100%, 125%, 150%, 200%, 75% or 50%). ● Use 22/33/5/4 to view the zoomed picture. Playback with multi-angles (JPEG) ● During playback, press 22/33 to rotate the picture on the TV screen.
DIVX(R) VOD registration code Basic operations 1 Press SYSTEM MENU to enter the Setup Menu. 2 3 4 5 Press 22/33 to select a page to be set. 6 1 In ‘GENERAL SETUP PAGE’, press 3 4 to highlight DIVX(R) VOD, then press 33 or OK to enter its submenu and press OK again to confirm. ➜ The registration code will appear. 2 3 Press OK to exit. Press 5/4 to highlight an option. Enter its submenu by pressing 33 or OK. Move the cursor by pressing 5/4 to highlight the selected item.
System Menu Options English ➜ ON: Select this to level out the volume. This feature is only available for movies with Dolby Digital mode. ➜ OFF: Select this when you want to enjoy the surround sound with its full dynamic range. Notes: – This option is available only when the "HDMI" is set to "ON". – If no display appears on the TV screen due to unsupported resolution, reconnect any available interlace video output to your display and re-adjust the resolution settings to 480p/576p.
Tuning to radio stations RDS 1 Press SOURCE on the set repeatedly or TUNER on the remote to select FM tuner source. 2 Press and hold TUNING 22/33and release the button. ➜ The radio automatically tunes to a station with sufficient reception. Radio Data System is a service that allows FM stations to show additional information. If you are receiving a RDS station, and the station name are displayed. 3 Repeat step 2 if necessary until you find the desired station.
External Sources English How to organize your MP3/WMA files on the USB mass storage device This Hi-Fi system will browse the MP3/WMA files in the folders/sub-folders/titles order. Using a USB mass storage device By connecting a USB mass storage device to the Hi-Fi system, you can enjoy the device's stored music through the powerful speakers of Hi-Fi system. Organize your MP3/WMA files in different folders or subfolders as required.
2 Clock setting See "Preparations-Step 2: Setting the clock". Timer setting ● The system can be used as an alarm clock, whereby the last selected source is switched on at a set time (one time operation). The clock time needs to be set first before the timer can be used. 1 In standby mode, press and hold SLEEP/ TIMER on the remote control for more than three seconds. ➜ "TIMER SET" is displayed briefly. Then, the hour digits flash on the display panel.
Specifications English Amplifier Speakers Rated output power ......... 2 x 20W + 50W RMS Frequency response (L/R) ................. 20 - 20000Hz (Subwoofer) ...................... 50 - 180Hz Signal to noise ratio ............................................ > 65dB Aux input ............................................. 1V RMS 20kohm Speaker impedance (L/R) .................................. 4 ohm (Subwoofer) .................................. 4 ohm Speaker driver (L/R) ..................................
English Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution ✔ Check if the AC power cord is properly No power. connected.
Troubleshooting English Problem Solution The DVD player does not start playback. ✔ Insert a readable disc. ✔ Check the disc type, color system and region code. ✔ Clean the disc. ✔ Place the disc with the playback side down. ✔ Press SYSTEM MENU to turn off the setup menu. ✔ Cancel the parental control rating function or change the rating level. ✔ Moisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour.
Problem English Troubleshooting Solution Left and right sound outputs are reversed. The remote control does not function. ✔ Check the speaker connections and location. ✔ Point the remote control at the remote control ✔ ✔ ✔ ✔ sensor of the unit. Reduce the distance to the player. Remove any possible obstacles. Replace the battery with a new one. Check that the battery is loaded correctly. The timer is not working ✔ Set the clock correctly.
Meet Philips at the Internet http://www.philips.com English Français Français Español Español Deutsch Nederlands Italiano Nederlands Italiano Deutsch Português Português MCD288E Čeesskkyy Č Suomi Slovensky CLASS 1 LASER PRODUCT Português Magyar Polski 2007.12.
