Register your product and get support at www.philips.
1 Important Safety Notice 2 Your DVD Micro Theater Introduction What’s in the box Overview of the main unit Overview of the subwoofer Overview of the remote control 3 Connect Place the unit Before you connect Connect TV Connect Subwoofer Connect power 4 Get started Prepare the remote control Set clock Turn on Find the correct viewing channel Select the correct TV system Change system menu language Turn on Progressive Scan 5 Play Play discs Play from USB Play DivX video Play MP3/WMA/picture files Play con
1 Important Safety Important Safety Instructions a Read these instructions. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth. g Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. h Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Know these safety symbols This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.
Notice Any changes or modifications made to this device that are not expressly approved by Philips Consumer Lifestyle may void the user’s authority to operate the equipment. Environmental information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.
You can play DVD discs with the following region codes: DVD region code E n gl i s h 2 Your DVD Micro Theater Countries Latin America Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Overview of the main unit Front view a b f c MP3 LINK DVD/MP3-WMA-CD COMPATIBLE e d a Display panel • Display current status. b Disc compartment c • USB socket. d MP3 LINK • Jack for an external audio device. e Remote control sensor f • 8 EN Headphone socket.
g h i j E n gl i s h Back view t SOURCE k l m n VOLUME s r VOLUME q p o COMPONENT OUT HDMI AVOUT Y Yb/Cb Yr/Cr g • h Start or pause play. / • • Press and hold for fast backward or forward search. Skips to the previous or next title, chapter or track. i • Turn on the apparatus; switch to standby mode. SUB WOOFER OUT DC IN FM ANT q DC IN • Power supply socket r VOLUME -/+ • Adjust volume. s • Press to open or close the disc compartment. • • Stop play. Erase a program.
Overview of the subwoofer Bottom view Overview of the remote control DISC USB MODE A-B DIM TUNER MP 3 LINK SLEEP DISPLAY TIMER SYSTEM MENU CLOCK DISC MENU a TO MAIN SET OK AC~ DBB b SURROUND a Cable to the main set. VOL b Power cable. 1 2 3 4 5 6 7 8 9 0 GOTO MUTE ANGLE PROG SUBTITLE a • Turn on the apparatus; switch to standby mode. b Source selection keys • Select a source.
d DISC MENU • For video discs: access or exit the disc menu. • For video discs with playback control(PBC): turn on/off PBC. e SLEEP/TIMER • Set the sleep timer. • Set the alarm timer. f • • • • g / • • • • • • h /SLOW For menus: navigate up Move an enlarged picture up Rotate or invert pictures. Select a slow play mode. Search within a track or disc. For menus, navigate left/right. Tune to a radio station. Move an enlarged picture left/right. Adjust time. Toggle between 24H and 12H during clock setting.
3 Connect Connect TV Connect video cables Place the unit With this connection, you can watch video from the unit on the TV screen. You can select the best video connection that your TV supports. • Option 1: Connect through HDMI (for a HDMI, DVI or HDCP-compliant TV). • Option 2: connect through component video (for a standard TV or Progressive Scan TV). • Option 3: connect through composite video (CVBS) (for a standard TV). Option 1: Connect through HDMI 1 2 Place the unit near to the TV.
the HDMI socket on this unit. the HDMI input socket on the TV. 1 Note Connect the supplied composite video cable to: • the AV OUT socket on this unit. • the video input socket on the TV. E n gl i s h • • • If your TV has only a DVI connection, connect through a HDMI/DVI adaptor. An extra audio connection is needed to complete this connection. Connect Subwoofer 1 Option 2: Connect through component video Insert the grey audio plug from the subwoofer into the SUBWOOFER OUT socket on the main unit.
Connect power Caution • Risk of product damage! Ensure that the power supply voltage corresponds to the voltage printed on the back or the underside of the unit. • Risk of electric shock! When you unplug the AC power, always pull the plug from the socket. Never pull the cord. • Before you connect the AC power, ensure you have completed all other connections. 1 Connect the power plug (black) on the subwoofer to the wall outlet.
E n gl i s h 4 Get started Caution • Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the back of the apparatus. Write the numbers here: Model No. __________________________ Serial No.
• Switch to standby mode 1 Press again. » The clock (if set) appears on the display panel. 5 [NTSC] - For TV with NTSC color system. To exit the menu, press SYSTEM MENU. Note • When the HDMI cable is connected, the [TV System] option is unavailable. Find the correct viewing channel 1 2 3 Press Change system menu language to turn on the unit. Press DISC to switch to disc mode.
7 8 Select [Progressive], then press 9 To proceed, select [OK] and press OK. » The progressive setup is complete. . E n gl i s h Select [On], then press OK. » A warning message is displayed. Note • If a blank/distorted screen is displayed, wait for 15 seconds for auto recovery or turn off progressive scan manually. 10 Turn on the progressive scan mode on the TV.
5 Play Note For VCD with PlayBack Control (PBC) feature (version 2.0 only): With the PBC feature, you can play VCD interactively according to the menu screen. 1 • With some disc/file types, play may differ. During play, press DISC MENU to enable/disable PBC. » When PBC is enabled, the menu screen is displayed. » When PBC is disabled, normal play is resumed. Play discs Select an audio language Caution • Never look at the laser beam inside the unit.
Insert the USB plug into the socket. Play MP3/WMA/picture files Press USB to select the USB source. You can play MP3/WMA/picture files copied onto a CD-R/RW, recordable DVD or USB device. Press DISC MENU until the folder is displayed. 4 Press / to select a folder, then press OK to confirm. 5 6 Press / to select a file from the folder. Press to start play. • To stop play, press . • To pause or resume play, press • To skip to the previous/next file, press / . .
Play options Note • The section A and B can be set only within the same track/title. Display play information 1 Search forward/backward 1 During play, press / repeatedly to select a search speed. • To resume play at normal speed, press . Search by time or chapter/track number 1 During video/audio play, press GOTO repeatedly to display time field or track field. • For the time field, enter the play position in hours, minutes and seconds. • For the track field, enter the track/ chapter number.
E n gl i s h Select a camera angle Note • This feature is only available for DVDs recorded with multiple camera angles. 1 During play, press ANGLE/PROG repeatedly to select a camera angle. Picture view options Preview pictures 1 During play, press . » The thumbnails of 12 pictures are displayed. 2 Press / to turn to the next/previous page (if available) 3 Navigate through the current page with buttons / , / and select a picture.
6 Adjust settings Tip • You can set or change the password, go to [Preferences] >[Password]. Note • If the setup option is grayed out, it means the setting cannot be changed at the current state. [OSD Language] Select an on-screen menu language. [DivX(R) VOD Code] Display the DivX® registration code. General setup 1 Press SYSTEM MENU. » [General Setup]menu is displayed. 2 3 4 Press • Use this product’s DivX registration code when you rent or purchase video from www. divx.com/vod.
[HDMI Audio] Select the HDMI audio setting when you connect this product and the TV with an HDMI cable. • [On] - Allow audio output through the TV and the speaker system. If the audio format on the disc is not supported, it will be downmixed to two-channel sound (linear-PCM). • [Off] - Disable audio output from the TV. The sound is only output through the speaker system. • [Off] – Enjoy surround sound with a full dynamic range.
[TV Display] Select a display format: Note • This product supports the resolution display of 720p and above. • • • [4:3 Pan Scan] - For 4:3 screen TV: fullheight display with the trimmed sides. [4:3 Letter Box] - For 4:3 screen TV: wide-screen display with black bars on the top and bottom of the screen. [16:9] - For wide-screen TV: display ratio 16:9. [Progressive] If a progressive scan TV is connected to this product, turn on the progressive scan mode. • [On] - Turn on progressive scan.
E n gl i s h Note • Rated DVDs above the level you set in [Parental control] require a password to be played. • The ratings are country-dependent. To allow all discs to play, select ‘8’. • Some discs have ratings printed on them but are not recorded with ratings. This function has no effect on such discs. 1 Press SYSTEM MENU. » [General Setup] menu is displayed. 2 Press press 3 4 Select an option, then press OK. to select [Preferences], then . Select a setting, then press OK.
[Divx Subtitle] Select the language of the DivX. Tip • Ensure that the subtitle file has the exact same file name as the movie file. If for example the file name of the movie is ‘Movie.avi’, then you need to name the text file ‘Movie.sub’ or ‘Movie.srt’. [Default] Reset all the settings of this product to factory default, except for [Disc Lock], [Parental control] and [Password] settings.
Toexit Plug and Play installation mode 1 press source keys or on the remote control. » The system switches to the designated source mode or standby mode. Note • Ensure that you have connected and fully extended the supplied FM antenna. Program radio stations automatically Note Plug & Play • You can program a maximum of 20 preset radio stations.
4 Repeat the above steps to program other stations. Note • To overwrite a programmed station, store another station in its place. Tune to a preset radio station 1 Press / to select a preset number that you want.
Press one time two times Adjust volume level three times 1 During play, press VOL +/- to increase/ decrease the volume level. Select a sound effect Note • You cannot use different sound effects at the same time.
Mute sound 1 During play, press MUTE to mute/unmute sound. Listen through headphone 1 Plug a headphone into the the unit.
Set the sleep timer 1 Adjust brightness of display panel 1 In standby mode, press and hold MODE/ DIM repeatedly to select different levels of brightness for the display panel. Set the alarm timer 1 Ensure that you have set the clock correctly. 2 In standby mode, press and hold SLEEP/ TIMER. » The hour digits are displayed and begin to blink. 3 Press / to set the hour. » The minute digits are displayed and begin to blink. 4 5 Press 6 Press SLEEP/TIMER to confirm.
10 Product information Note • Product information is subject to change without prior notice. Tuning Range Tuning grid Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio 87.5 - 108MHz 50KHz <22 dBf <43 dBf >28dBf <2% >55dB Speakers Specifications Amplifier Rated Output Power Frequency Response Signal to Noise Ratio Aux Input Tuner (FM) 2X10W + 40W RMS 40 -20000 Hz, -3dB >67dB 0.
USB playability information • • • • Compatible USB devices: • USB flash memory (USB 2.0 or USB1.1) • USB flash players (USB 2.0 or USB1.1) • memory cards (requires an additional card reader to work with this apparatus) • • • • • • Digital Video Discs (DVDs) Video CDs (VCDs) Super Video CDs (SVCDs) Digital Video Discs + Rewritable (DVD+RW) Compact Discs (CDs) Picture (Kodak, JPEG) files on CDR(W) DivX(R) disc on CD-R(W): DivX 3.11, 4.x and 5.x DivX Ultra disc WMA Supported MP3-CD formats: • ISO 9660 • Max.
11 Troubleshooting Note • Never remove the casing of this system. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this system, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. Philips.com/support). When you contact Philips, ensure that your Philips is nearby and the model number and serial number are available.
• Moisture has condensed inside the system. Remove the disc and leave the system turned on for about an hour. Disconnect and reconnect the AC power plug, and then turn on the system again. As a power-saving feature, the system turns off automatically 15 minutes after disc play reaches the end and no control is operated. Poor radio reception • Increase the distance between the unit and your TV or VCR. • Fully extend the FM antenna. • Connect an outdoor FM antenna instead.
12 Appendix Mount to a wall Caution • Risk of product damage! Always consult professional personnel to safely mount the product to a wall. • Risk of injury! Ensure that no supply ducts such as gas, water or electricity are harmed when you drill the holes.
© 2010 Koninklijke Philips Electronics N.V. All rights reserved. Document order number: DCM263_55_UM_V1.
