User manual
21
8 Other features
Set alarm timer
This unit can be used as an alarm clock. You can
select DISC, TUNER or USB as alarm source.
Note
Make sure that you have set the time correctly.
1 In standby mode, press and hold SLEEP/
TIMER for three seconds
»
[TIMER SET]
display.
» [SELECT SOURCE]
scrolls on the screen.
2 Press SOURCE repeatedly to select a
source: DISC, USB, TUNER.
3 Press SLEEP/TIMER
» The hour digits are displayed and begin
to blink.
4 Press / repeatedly to set hour, then
press SLEEP/TIMER
» The minute digits are displayed and
begin to blink.
5 Press / to set minute, then press
SLEEP/TIMER
» VOL
to blink.
6 Press / to adjust volume, then press
SLEEP/TIMER
»
is displayed.
» To deactivate alarm timer, press
SLEEP/TIMER again.
Note
Alarm timer is not available in MP3 LINK mode.
If DISC/USB source is selected and the track cannot be
played, tuner is activated automatically.
[Night Mode]: Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
Preference setup
1 Press button.
2 Select to access the setup menu.
3 Select to access the [Preference Setup]
options.
[Audio]: Select an audio language for
video.
[Subtitle]: Select a subtitle language
for video.
[Disc Menu]: Select a menu language
for a video disc.
[Parental]: Set the rating level to a
disc. Restrict access to discs that are
encoded with ratings These discs must
be recorded with rating levels.
[PBC]:Display or skip the content
menu for VCD and SVCD.
[Password]: Set or change a password
to play a restricted disc.
[DivX Subtitle]:Select the language of
the DivX.
[Version Info.]:Display the software
version for the .
[Default]:Reset the home theater to
the default settings programmed at
the factory.
Note
the movie is ‘Movie.avi’, then you need to name the text
EN