User manual

22
» The unit turns on automatically at
the set time and switches to the last
selected source.
 To deactivate the alarm timer, select
[OFF] (off) in step 4.
Set the sleep timer
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period of time
(in minutes).
» The unit turns off automatically after
the set period of time.
Listen through headphone
Plug a headphone into the socket on the unit.
Listen to an audio player
You can listen to an external device through
this unit.
1 Connect an external device.
 For the external device with red/white
audio output sockets:
Connect a red/white audio cable (not
supplied) to the AUX IN L/R sockets
and to the audio output sockets on
the external device.
9 Other features
Activate demonstration mode
You can see an overview of all features.
1 In standby mode, press on the main unit
to activate the demonstration mode.
» A demonstration of major available
features starts.
To deactivate the demonstration mode:
1 Press on the main unit again.
Adjust brightness of display
panel
In standby mode, press MODE/DIM repeatedly
to select different levels of brightness for the
display panel.
Set the alarm timer
Note
 Ensure that you have set the clock correctly.
1 In standby mode, press and hold SLEEP/
TIMER.
» The hour digits are displayed and begin
to blink.
2 Press + VOL - to set the hour, and then
press SLEEP/TIMER again.
» The minute digits are displayed and
begin to blink.
3 Press + VOL - to set the minute, and then
press SLEEP/TIMER
» [OFF] (off) begins to blink.
4 To activate the wake-up timer, press + VOL
- to select [ON] (on) while [OFF] (off) is
blinking.
» A clock icon is displayed.
EN