User manual

20
Program radio stations
manually
Note
 You can program a maximum of 20 preset radio
stations.
1 Tune to a radio station.
2 Press ANGLE/PROG to activate
programming.
3 Press / to allocate a number from 1
to 20 to this radio station, and then press
ANGLE/PROG
» The preset number and the frequency
of the preset station are displayed.
4 Repeat the above steps to program other
stations.
Note
 To overwrite a programmed station, store another
station in its place.
Tune to a preset radio station
Press / to select a preset number that you
want.
Tip
 You can also use the numerical keypad to select a
preset station directly.
7 Tune to FM
radio stations
Note
 Ensure that you have connected and fully extended the
supplied FM antenna.
1 Press TUNER.
2 Press and hold / .
3 When the frequency indication starts to
change, release the button.
» The FM tuner tunes to a station with
strong reception automatically.
4 Repeat steps 2-3 to tune to more stations.
To tune to a weak station:
Press
/ 
reception.
Program radio stations
automatically
Note
 You can program a maximum of 20 preset radio
stations.
1 In tuner mode, press / to select a
preset number to start programing.
2 Press and hold ANGLE/PROG for
2 seconds to activate automatic
programming.
» [AUTO]
» All available stations are programmed
in the order of waveband reception
strength.
» 
broadcast automatically.
EN