User manual

14
5 Play
Note
 
Play a disc
Caution
 Never look at the laser beam inside the unit.
 Risk of product damage! Never play discs with
accessories such as disc stabilizer rings or disc
treatment sheets.
 Never put any objects other than discs into the disc
compartment.
1 Press DISC to select the DISC source.
2 Press on the front panel to open the disc
tray.
3 Insert a disc with the printed side facing
upward.
4 Press to close the disc tray.
» Play starts automatically.
 To stop play, press
.
 To pause or resume play, press
.
 To skip to the previous/next title/
chapter/track, press
/ .
If play does not start automatically:
1 Select a title/chapter/track and then press
.
Tip
 To play a locked DVD, enter the 4-digit parental control
password.
Change system menu
language
1 Press SYSTEM MENU.
2 Select [General Setup].
3 Select [OSD language] and then press .
4 Select a setting and then press OK.
5 To exit the menu, press SYSTEM MENU.
Turn on Progressive Scan
Progressive scan displays twice the number of
frames per seconds than interlaced scanning
(ordinary TV system). With nearly double the
number of lines, progressive scan offers higher
picture resolution and quality.
Before you turn on this feature, ensure that:
 The TV supports progressive scan
signals.
 You have connected this unit with the
TV through component video.
1 Turn on the TV.
2 Ensure that the TV progressive scan mode
is deactivated (see the TV user manual).
3 Switch the TV to the correct viewing
channel for this unit.
4 Press DISC.
5 Press SYSTEM MENU.
6 Press / to select [Video Setup] in the
menu, and then press
.
7 Select [Component Video], and then press
.
8 Select [P-Scan], and then press OK.
» The progressive setup is complete.
EN