Register your product and get support at www.philips.
1 Important Safety Notice 2 Your DVD Micro Theater Introduction What’s in the box Overview of the main unit Overview of the remote control 3 Connect Place the unit Connect speakers Connect FM antenna Connect TV Connect power 7 4 4 5 6 6 7 7 8 10 10 10 10 10 12 Tune to FM radio stations 20 20 20 20 Program radio stations automatically Program radio stations manually Tune to a preset radio station 8 Adjust volume level and sound effect Adjust volume level Select a sound effect Mute sound 9 Other
1 Important Safety This ‘bolt of lightning’ indicates uninsulated material within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering. The ‘exclamation point’ calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
Never remove the casing of this apparatus. Never lubricate any part of this apparatus. Never place this apparatus on other electrical equipment. Keep this apparatus away from direct sunlight, naked Z ' Never look into the laser beam inside the apparatus. Ensure that you always have easy access to the power cord, plug or adapter to disconnect the apparatus from the power. Be careful not to adjust the volume as your hearing adapts.
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet.) Your system consists of materials which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment.
E n gl i sh What’s in the box Check and identify the contents of your package: Main unit 2 speakers Remote control with battery Composite video cable (yellow) Power cord FM wire antenna User manual Quick start guide Overview of the main unit a b c d e f o a Turn on the apparatus or switch to the Eco Power standby mode. b VOLUME / Adjust volume. Adjust time. c SOURCE Select a source. g h ijk n m l d Display panel Display current status.
Skip to the previous/next title or chapter. Select a preset radio station. Overview of the remote control h DBB Turn on or off dynamic bass enhancement. a i Start or pause play. Stop play. In demo mode, activate or deactivate demonstration. b j k MODE Select repeat play modes. "Z ' x c w v d e u f l MP3-LINK Jack for an external audio device. g m Headphone socket. n USB DIRECT USB socket.
d DISC MENU For video discs: access or exit the disc menu. For video discs with playback control(PBC): turn on/off PBC. e AUDIO For VCD, select stereo, mono-left or mono-right channel. For DVD/DivX video, select an audio language. f / g Search within a track. Tune to a radio station. For menus, navigate left/right. Move an enlarged image left/right. Rotate or invert pictures. SLOW/ ZOOM For menus, navigate up/down. Rotate or invert pictures.
3 Connect 2 Insert the stripped part of the wire completely. Insert the right speaker wires to “R”, left speaker wires to “L”. Insert the red wires to “+”, black wires to “-”. 3 ! Z ' Place the unit a 1 2 b c Connect FM antenna Place the DVD micro theater near TV. Place the left and right speakers at equal distance from the TV and at an angle of approximately 45 degrees from the listening position.
Option 2: Connect through S-Video E n gl i sh You can select the best video connection that your TV supports. Option 1: connect through component video (for a standard TV or Progressive Scan TV). Option 2: connect through S-Video (for a standard TV). Option 3: connect through composite video (CVBS) (for a standard TV). Connect an S-video cable (not supplied) to: the S-Video socket on the back of the unit. the S-Video socket on the TV.
4 Get started Connect audio cables To play sound from the TV through this unit, connect audio cables (red/white - not supplied) to: the AUX IN L/R sockets on the back of the unit. the audio output sockets on the TV. Caution Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. 8 TV L AUDIO OUT R Always follow the instructions in this chapter in sequence.
Insert one lithium CR2025 battery with correct polarity (+/-) as indicated. 3 Close the battery compartment. Tip In the Eco Power mode, you can press CLOCK to switch to the standby mode and view the clock (if set). If the system remains in the standby mode for more than 90 seconds, it switches to the Eco Power mode automatically. Note Before you press any function button on the remote @ control.
Change system menu language 1 Press SYSTEM MENU. 2 Select [General Setup]. 3 Select [OSD language] and then press . 4 Select a setting and then press OK. 5 To exit the menu, press SYSTEM MENU. Turn on Progressive Scan Progressive scan displays twice the number of frames per seconds than interlaced scanning (ordinary TV system). With nearly double the number of lines, progressive scan offers higher picture resolution and quality.
Play from USB When you load a DVD/(S)VCD disc, a menu may be displayed on the TV screen. To access or exit the menu manually: 1 Press DISC MENU. For VCD with PlayBack Control (PBC) feature (version 2.0 only): With the PBC feature, you can play VCD interactively according to the menu screen. 1 E n gl i sh Use the disc menu Note Ensure that the USB device contains playable music, pictures, or video. 1 Insert the USB device. 2 3 Press USB to select the USB source.
3 . To stop play, press . . To pause or resume play, press To change a subtitle language, press SUBTITLE. Note You can only play DivX videos rented or purchased through the DivX registration code of this unit. @ " @ $ } &' .smi, .sub, .ssa, .ass) are supported but do not appear on # $ ' ? name of the video.
During play, press ANGLE/PROG repeatedly to select a camera angle. E n gl i sh In stop mode and when the disc has not been removed, press . To cancel resume mode and stop play completely: In stop mode, press . Picture view options Preview pictures Play options 1 During play, press . » The pictures in current folder are displayed. 2 Press / to select a picture from the folder. » A thumbnail of the selected picture is displayed in the right pane.
6 Adjust settings 1 2 3 4 Press SYSTEM MENU. Select a setup page. Select an option and then press . Select a setting and then press OK. To return to the previous menu, press . To exit the menu, press SYSTEM MENU. General setup On the [General Setup] page, you can set the following options: [OSD language] Select the preferred language for on-screen display. [DivX® VOD Code] Display the DivX® registration code. Tip Enter this DivX registration code when you rent or purchase video from http://vod.
[Component Video] Set the video output according to the video connection. If the composite connection is used, this setting is not required. [S-VIDEO] – If the S-Video connection is used, select this option. [Interlaced] – For ordinary TV: turn on the interlace mode. [P-Scan] – For progressive scan TV: turn on the progressive scan mode. [Parental Control] Restricts access to discs that are unsuitable for children. These types of discs must be recorded with ratings. Press OK.
7 Tune to FM radio stations Program radio stations manually Note You can program a maximum of 20 preset radio Note stations. Ensure that you have connected and fully extended the supplied FM antenna. 1 2 3 1 2 Tune to a radio station. 3 Press / to allocate a number from 1 to 20 to this radio station, and then press ANGLE/PROG ' » The preset number and the frequency of the preset station are displayed. 4 Repeat the above steps to program other stations. Press TUNER.
8 Adjust volume level and sound effect 1 Adjust volume level Mute sound During play, press VOL +/- to increase/decrease the volume level. E n gl i sh To turn on automatic loudness control, press LOUD/DBB during play until the loudness icon is displayed. To turn off automatic loudness control, press LOUD/DBB until the loudness icon disappears. During play, press MUTE to mute or restore sound. Select a sound effect Note You cannot use different sound effects at the same time.
» The unit turns on automatically at the set time and switches to the last selected source. 9 Other features Activate demonstration mode To deactivate the alarm timer, select [OFF] (off) in step 4. You can see an overview of all features. 1 In standby mode, press on the main unit to activate the demonstration mode. » A demonstration of major available features starts. To deactivate the demonstration mode: 1 Press on the main unit again.
2 3 For the external device with headphone socket: Connect the MP3 Link cable (not supplied) to the MP3 LINK socket and to the headphone socket on the audio player. 10 Product information Select the MP3 Link/AUX source. Start play on the external device. E n gl i sh Note Product information is subject to change without prior notice. Record to a digital recorder You can record audio from this unit to a digital recorder.
Tuner (FM) Tuning Range Tuning grid Sensitivity - Mono, 26dB S/N Ratio Sensitivity - Stereo, 46dB S/N Ratio Search Selectivity Total Harmonic Distortion Signal to Noise Ratio 87.
WMA v9 or earlier Directory nesting up to a maximum of 8 levels Number of albums/ folders: maximum 99 Number of tracks/titles: maximum 999 ID3 tag v2.0 or later File name in Unicode UTF8 (maximum length: 128 bytes) Unsupported formats: Empty albums: an empty album is an album that does not contain MP3/ @ display. " ' For example, Word documents (.doc) @ } ' " ignored and not played.
The aspect ratio of the TV screen cannot be changed even though you have set the TV display format. " ? } DVD disc. " The aspect ratio may not be changed for some TV systems. No sound or poor sound " Adjust the volume. " Disconnect the headphones. " Check that the speakers are connected correctly. " Check if the stripped speaker wires are clamped.
© 2011 Koninklijke Philips Electronics N.V. All rights reserved. MCD122_UM_79_V2.
