Quick start guide

ManualsBrandsPhilips ManualsDVD PlayerMCD119/05

MCD119

Quick Start Guide

What’s in the Box?

You should find these items upon opening the box.

Quick Start Guide

Composite Video Cable

Remote control with

battery

FM antenna

User Manual

Remove the plastic

protective sheet

Audio cable

MCD119 QUG_Eng 2007.8.10, 16:171

Summary of content (4 pages)

PAGE 1
MCD119 Quick Start Guide What’s in the Box? You should find these items upon opening the box. Remove the plastic protective sheet Composite Video Cable Audio cable Quic 2 1 k St art Remote control with battery User Man ual Guid e FM antenna MCD119 QUG_Eng Quick Start Guide 1 User Manual 2007.8.
PAGE 2
1 Connect the speaker cables. 2 Connect the FM antenna. Tip 3 See the User Manual for other TV connection options. Connect the composite video cable to a TV. 4 Connect the power supplies of the system and TV. MW antenna 3 Speaker (right) FM antenna A A To listen to the sound of this DVD Player through your TV, use the audio cables (white/ red) to connect LINE OUT (L/R) jacks of the DVD Player to the corresponding AUDIO IN jacks on the TV.
PAGE 3
Setting the clock 1 In standby mode, press and hold DISPLAY/CLOCK on the remote control. 2 When the hour digits flash, press VOLUME +/- on the front panel or VOL +/- on the remote to set the hours. 3 2; Press DISPLAY/CLOCK again and the minute digits flash. Then press VOLUME +/- on the front panel or VOL +/- on the remote to set the minutes. 4 Press DISPLAY/CLOCK again to confirm the time setting.
PAGE 4
Playing a disc 1 Push OPEN•CLOSE 0 on the top of the system to open the disc door. 2 Insert a disc with the print side facing up and close the disc door. 3 Playback will start automatically. If not press ÉÅ. 4 To stop playback, press 9. Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote) to select tuner source. 2 Press PROG/ANGLE for more than two seconds to program all available stations in order of waveband. 3 Press í/ë until the desired preset station is displayed.