Quick start guide

ManualsBrandsPhilips ManualsHi-FiSleek micro sound system

MCB275

Quick Start Guide

Prepare

Install

Enjoy

Step A

Step

What’s in the Box?

You should find these items upon opening the box.

Quick Start Guide

User Manual

Quick start guide User manual

Stand

140mm (5.51")

Mounting kit

(1x template, 2 x screws)

Remote control with

1 x CR2025 battery

Pull out the plastic

protective sheet

before use.

MCB275 QSG_05-Eng 2007.4.17, 16:321

Summary of content (4 pages)

PAGE 1
MCB275 Quick Start Guide Step A Install Step B Prepare Step C What’s in the Box? You should find these items upon opening the box. Pull out the plastic protective sheet before use. Remote control with 1 x CR2025 battery Stand 140mm (5.51") Quic k St art User Man ual Guid e Quick start guide Mounting kit (1x template, 2 x screws) MCB275 QSG_05-Eng 1 User manual 2007.4.
PAGE 2
Install Mounting stand onto the set PRESS FRONT 2 As shown, align the stand to the slots at set’s bottom, 4 FRONT facing down. 3 Push the stand down into the slots. Note: - For wall mounting, please refer to the User Manual, Appendix: How to mount your MCB275 onto Walls. You may need assistance from the qualified service personnel. Rear connections 1 Connect the speaker cables. 2 Connect the power adaptor of the system.
PAGE 3
Setting the clock 1 In the standby mode, press and hold CLOCK on the remote control. ➜ The clock digits for the hours continue to flash. 2 Press 4 / ¢ (or ¡ / ™ on the remote control) repeatedly to set the hours. 3 Press CLOCK to confirm. ➜ The minute digits start flashing. 4 Press 4 / ¢ (or ¡ / ™ on the remote control) repeatedly to set the minutes. 5 Press CLOCK to confirm the time. Enjoy Playing a disc 1 Insert a disc into the disc loader. ➜ Make sure the label side is facing you.
PAGE 4
Enjoy Programming and tuning to FM adio stations 1 Press SOURCE repeatedly (or FM on the remote control) to select the tuner source. 2 Press SCAN/PROGRAM (or PROG on the remote control) for more than two seconds to program all available stations in order of waveband. 3 Press ALBUM/PRESET +/- (or ¡ preset station is displayed.