Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety Notice Care for your product 8 Troubleshooting 2 2 2 3 2 Your Micro Music System 5 5 5 6 7 3 Get started 8 8 8 9 9 9 Introduction What's in the box Overview of the main unit Overview of the remote control Connect speakers Connect power Prepare the remote control Power on Set the clock 4 Play 10 10 10 10 11 11 5 Listen to the radio 12 12 13 6 Other features 15 15 15 15 7 Product information 17 17 17 18 Play from disc Play from USB Basic play operations Skip tracks
1 Important • • Safety Read and understand all instructions before you use this micro music system. If damage is caused by failure to follow the instructions, the warranty does not apply. Risk of electric shock or fire! • Never remove the casing of the product. • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately.
WOOX Innovations may void the user’s authority to operate the equipment. Compliance This product complies with the radio interference requirements of the European Community. This apparatus includes this label: Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/ EC.
• • • 4 Do not insert warped or cracked discs into the disc compartment. Remove the discs from the disc compartment if you are not using the product for an extended period of time. Only use microfiber cloth to clean the product.
2 Your Micro Music System Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Overview of the main unit h a b g c f d e a • • Turn on the product. Switch to standby mode or ECO power standby mode. b Display panel • Show current status. c • Connect USB storage devices. d AUDIO IN • Connect external audio devices. e Disc compartment f • Open or close the disc compartment. g VOLUME • Adjust volume. 6 EN h SOURCE • Select a source: DISC, USB, DAB, TUNER, AUDIO IN. / • Skip to previous/next track. • Search within a track/disc. • Tune to a radio station. • Adjust time.
e Overview of the remote control a r b c INFO RDS SOURCE PRESET/ALBUM SCAN d q p e MENU f VOL DIM SHUFFLE g MUTE REPEAT SOUND CLOCK PROG TIMER h i SLEEP o n m l k j • • • • / Skip to the previous/next track. Search within a track/disc/USB. Tune to a radio station. Adjust time. f VOL +/• Adjust volume. g MUTE • Mute or restore volume. h SOUND • Select a preset sound effect. i CLOCK • Set the clock. • View clock information. j SLEEP/TIMER • Set sleep timer. • Set alarm timer.
3 Get started Caution •• Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. Connect speakers Note •• Insert the stripped portion of each speaker wire into the socket completely. •• For better sound quality, use the supplied speakers only.
Prepare the remote control Caution Set the clock 1 •• Risk of product damage! When the remote control is not used for long periods, remove the batteries. To insert the remote control battery: 1 2 3 Open the battery compartment. Insert the supplied AAA battery with correct polarity (+/-) as indicated. Close the battery compartment. 2 3 4 5 Power on Press . »» MCB2305 switches to the last selected source. Switch to standby mode Press again to switch MCB2305 to standby mode.
2 4 Play Press SOURCE repeatedly to select the USB source. »» Play starts automatically. If not, press . Play from disc 1 2 3 4 Press SOURCE to select the DISC source. Press to open the disc compartment. Insert a disc with the label side up. Press to close the disc compartment. »» Play starts automatically. If not, press . SOURCE SOURCE Basic play operations You can control play through following operations. Play from USB / / Note •• Make sure that the USB device contains playable audio content.
REPEAT/ SHUFFLE VOL +/MUTE SOUND DIM Select an available play mode: • [REP ONE] (repeat one): repeat the current track • [REP ALB] (repeat album): repeat the current album • [REP ALL] (repeat all): repeat all tracks • [SHUFFLE] (shuffle): play tracks randomly • [OFF] (off): play tracks in sequence Increase or decrease volume. Mute or restore sound. Select a sound effect: [CLEAR] (clear); [POWERFUL] (powerful); [WARM] (warm); [BRIGHT] (bright); and [BALANCE] (balance). Adjust display brightness.
5 Listen to the radio Tip Store DAB+ radio stations automatically Note •• New stations and services will be added in DAB+ broadcast from time to time. To make new DAB+ stations and services available, perform full scan regularly. •• Position the antenna as far as possible from TV, VCR, or other radiation source. •• Make sure that you have connected the supplied aerial. •• For optimal reception, fully extended and adjust the position of the aerial.
Show DAB+ information While listening to DAB+ radio, press INFO/ RDS repeatedly to scroll through the following information (if available): • Station Name • RDS TEXT message • Dynamic Label Segment • Program Type • Ensemble Name • Frequency • Signal error rate • Bit rate • Audio status (DAB, DAB+) • Time • Date Use DAB+ menu In DAB+ mode, press MENU to access DAB+ menu. 1 2 3 Press / to scroll the menu options: • [Full scan] (full scan): scan and store all the available DAB+ radio stations.
»» The stations scanned are based on the selection in step 2. »» MCB2305 broadcasts the first scanned FM radio stations. Store FM radio stations manually Note •• You can program a maximum of 20 preset radio stations. •• To overwrite a programmed radio station, store another one with its sequence number. 1 2 3 4 Tune to a radio station. Press PROG to activate programming. »» The sequence number blinks.
6 Other features Note •• If you do not stop an alarm, it keeps ringing for 30 minutes, and then the product automatically switches to normal standby mode. Set the alarm timer This product can be used as an alarm clock. You can select the disc, FM, or .mp3 files on a USB storage device as alarm source. Note •• Make sure that you have set the clock correctly. •• If the selected alarm source is unavailable, this product switches to FM mode automatically.
• 2 3 and the headphone jack on an external device. Press SOURCE repeatedly to select the AUDIO IN source. Start to play the device (see the device user manual).
7 Product information Total Harmonic Distortion Signal to Noise Ratio Number of preset radio stations <3% >45 dB FM (20), DAB (20) Note •• Product information is subject to change without prior notice.
USB playability information Compatible USB devices: • USB flash memory (USB2.0 or USB1.1) • USB flash players (USB2.0 or USB1.
8 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
Specifications are subject to change without notice 2014 © WOOX Innovations Limited. All rights reserved. Philips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used by WOOX Innovations Limited under license from Koninklijke Philips N.V. MCB2305_10_UM_V1.
