MCB146 Quick Start Guide What’s in the Box? You should find these items upon opening the box.
Connection 1 Connect the speaker wires to the SPEAKERS terminals. 2 Connect the power cord of the system to the AC power outlet. DAB/ FM wire antenna B speaker (left) speaker (right) C 1 2 AC power cord Tip: It is unnecessary to connect the DAB/ FM antenna since it is fixed to the main unit. MCB146_05_QSG_Eng 2 Notes for the remote control: – First, select the source you wish to control by pressing one of the source select keys on the remote control (DISC or AUX, for example).
Setting the clock 1 In standby mode, press and hold DISPLAY/CLOCK on the remote control set for 2 seconds. 2 Press PROG on the remote control to select 12-hour or 24-hour display. 3 Press DISPLAY/CLOCK to confirm. ➜ The clock digits for the hours flash. 4 Press 4 / ¢ to set the hours. 5 Press DISPLAY/CLOCK again. ➜ The clock digits for the minutes flash. 6 Press 4 / ¢ to set the minutes. 7 Press DISPLAY/CLOCK to confirm the time. Playing a disc 1 Select CD source.
Tuning to DAB stations 1 Press SOURCE (or DAB on the remote control) to select DAB to start an automatic search of available DAB stations. 2 Press 4 / ¢ to change the DAB stations. 3 Press 2; to confirm a selection. 4 To perform a local scan (in UK ), press briefly SCAN. To perform a full scan (outside UK ), press and hold SCAN. 5 To access setup options, press MENU, then use the navigation control buttons to select. Programming and tuning to FM stations 1 Select FM TUNER source.
