Instruction Manual
Table Of Contents
- Important notes for users in the U.K.
- Index
- Contents
- Controls
- CD OPEN-CLOSE (CD 1/CD 2/CD 3) ^
- @ MUTE
- IS (INCREDIBLE SURROUND)
- AUTO REV. (AUTO REVERSE)
- REPEAT
- SHUFFLE
- SLEEP
- RDS
- CLOCK
- Notes for remote control:
- Plug and Play
- Demonstration mode
- Switching the system on
- Switching the system to standby mode
- Switching the system to Eco Power standby mode (< 0.4 Watt)
- Power saving automatic standby
- Dim mode
- Volume control
- Interactive sound control
- Discs for Playback
- Loading disc
- Playing discs
- Selecting a desired track/passage
- Replacing discs during playback
- Repeat and Shuffle
- Programming the disc tracks
- Erasing the programme
- Tuning to radio stations
- Storing preset radio stations
- Tuning to preset radio stations
- Erasing a preset radio station
- RDS
- Loading tape
- Playing tapes
- Rewinding / Fast forwarding
- General information on recording
- Preparation for recording
- One touch recording
- CD Synchronised start recording
- Digital recording via Digital Out
- External Sources
- Maintenance
- Specifications
- Troubleshooting
- 310330618501
Preparations
Rear connections
The
type
plate is located
at the rear
of the
system.
For users in the U.K.:please follow
the
instructfons on
page 2.
(a) Power
Before connecting the AC power cord to the
wall outlet, ensure that all other connections
have been made.
WARNINGI
-
For optimal
performance, use
only the
original power cable.
— Never make or
change connections with
the
power
switched on.
To
avoid overheating of the system, a safety
circuit has been built in. Therefore, your
system may
switch to Standby mode
automatically under extreme conditions. If
this happens,
let the system cool down
before reusing
it.
(b) Antennas Connection
Connect the supplied AM loop antenna and FM
antenna to the respective terminals. Adjust the
position of the antenna for optimal reception.
Position the antenna as far as possible from a TV,
VCR or other radiation source.
8