Instruction Manual
Table Of Contents
- Important notes for users in the U.K.
- Index
- Contents
- Controls
- CD OPEN-CLOSE (CD 1/CD 2/CD 3) ^
- @ MUTE
- IS (INCREDIBLE SURROUND)
- AUTO REV. (AUTO REVERSE)
- REPEAT
- SHUFFLE
- SLEEP
- RDS
- CLOCK
- Notes for remote control:
- Plug and Play
- Demonstration mode
- Switching the system on
- Switching the system to standby mode
- Switching the system to Eco Power standby mode (< 0.4 Watt)
- Power saving automatic standby
- Dim mode
- Volume control
- Interactive sound control
- Discs for Playback
- Loading disc
- Playing discs
- Selecting a desired track/passage
- Replacing discs during playback
- Repeat and Shuffle
- Programming the disc tracks
- Erasing the programme
- Tuning to radio stations
- Storing preset radio stations
- Tuning to preset radio stations
- Erasing a preset radio station
- RDS
- Loading tape
- Playing tapes
- Rewinding / Fast forwarding
- General information on recording
- Preparation for recording
- One touch recording
- CD Synchronised start recording
- Digital recording via Digital Out
- External Sources
- Maintenance
- Specifications
- Troubleshooting
- 310330618501
Troubleshooting
GENERAL
The system does not react when buttons
are pressed.
— Remove and reconnect the AC power plug and
switch on the system again.
Sound cannot be heard or is of poor
quality.
— Adjust the volume.
— Disconnect the headphones.
— Check that the speakers are connected correctly.
— Check if the stripped speaker wire is clamF>ed.
The left and right sound outputs are
reversed.
— Check the speaker connections and location.
The remote control does not function
properly.
Select the source (CD or TUNER, for example)
before pressing the function button ( ► , M, H).
Reduce the distance between the remote control
and the system.
Insert the batteries with their polarities
(+/— signs) aligned as indicated.
Replace the batteries.
Point the remote control directly toward
IR sensor on the front of the system.
The timer is not working.
Set the clock correctly.
Press TIMER ON/OFFto switch on the timer:
If a recording is in progress, stop tfie recording.
Not all lighted buttons are showing light.
- Press DIM to select DIM OFF display mode.
The Clock/Timer setting is erased.
Power has been interrupted or the power cord
has been disconnected. Reset the clock/timer.
The system displays features
automatically and buttons start flashing.
Press and hold DEMO STOP on the system
to switch off the demonstration.
310330618501
30