Important notes for users in the UK. Mains Plug This apparatus is fitted with an approved 13 Amp plug. To change & fuse i this type of plug proceed as follows: * Remove fuse cover and fuse. * Fix new fuse which should be 2 BS1362 5 A, PASTA. or BS} approved type. » Refit the fuse cover.
General Information/Safety Information General Information « This product complies with the radio interference requirements of the European Community. * The type plate is located on the rear of the set. « Re carding Is permissible insofar as copyright or other rights of third parties are not infringed. 1 All unnecessary packaging material has been omitted.
ysyibug Preparations AM Antenna Connection Connect the supplied loop antenna to the AM AERIAL terminal. Adjust the position of the AM loop antenna for optimum reception. Connect the supplied FM wire antenna to the FiM 752 terminal. Adjust the position of the Fiv! antenna for optimum reception, Outdoor Antenna Far better FM stereo reception connect an outdoor FM antenna 1o the Fi AERIAL 75 terminal, using a 75€2 coaxial cable.
Remote Control Functions ~ First sleet the source you wish to control by pressing nne of the source select keys on the remote control {e.g. CO, TUNER, TAPE or AUX {for mode! MC170 only}l. ~ Then select the desired function. Nita : For TV/VCR operation, the set must be using the BC-5 remote control system. For model MC 150 only PHILIPS oo switch the unit to standby mode. TUNER . 0 select TUNER mode, TAPE . select TAPE mode. o select G0 mode. start play in CD or TAPE mode. ot functional for this model.
ysiifiuy Controls Top View OPEN»CLOSE — to open the CD cover. 2 PROGRAM ta program CO tracks 3 << PREVIOUS / NEXT »p! to skip to the beginning of the current or previous/next track or to search backwards/forwards. 4 STOP m ~ 1o stop CD play or to clear a program. 5 PLAYS PAUSE Mui to start or interrupt CD play. 6 SHUFFLE — 1o play all the tracks in the disc in tandem order. 7 TIMER One Off to switch on or off the timer. 8 TIMER SET 1o settee Timer. 9 CLOCK SET 1o set the clock.
stinkbug 10 Operating the System PRESET RESET T Tunis Important : To begin operating the system, ensure that you have completed the preparation procedures. The set is in the standby mode when the mains plug is connected to the wall socket and 54" Hashes on the display. Switching the system ON + Press POWER or SOURCE selection {or CD, TUNER or TAPE on the remote control). Switching the system to standby mode » Press POWER again {or () on the cremate control).
Tuner ERODIBLE Tuning to radio stations 1 Press SCARCE to select TUNER. 2 Crass BAND to select desired waveband {not on all versions) 3 Press TUNING for more than one second. = The display will show 'SEARCH’ until a station with sufficient signal strength is found, * Repeat this procedure until the desired station is reached. + {border to tune to a weak station, briefly press TUNING until the display shows the right frequency and/or optimum reception has been obtained.
fuggy Tuner Receiving RDS radio station & RDS (Radio Data Systematize e PEE broadcasting service that allows FM stations to send additional b information along with the regular FM radio signal. This additional information can contain: * STATION NAME : The station name Is displayed. » FREQUENCY : The frequency of the station is displayed.
Cassette Deck N parsonage Bew Erm aay PRONGHORN O I~ Loading a cassette « Press OPEN. » The cassette door opens. « Load the cassette with the open side downward and the full spool to the left. * Close the cassette door. Important Do not open the cassette door when playing a tape. Tape Playback Press SOURCE to select TAPE. Load the cassette in GAZETTE DECK. Press PLAY to start play.
ysiI6ug 14 Compact Disc incinerator Warning! 1} This set is designed for conventional €0s. Do not use any accessories like dies stabilizer rings or CD treatment sheets, efc. as offered on the market, as these may cause malfunction of the CD mechanism. 2} Do not laud more than 1 disc into the tray. In addition to the conventional 12-cm disc, 8-cm disc can also be used without an adapter. Loading a Disc 1 Press SOURCE to select CO. 2 Press OPENS CLOSE at the top of the set. — Dist cover opens upward.
Shuffle (also on model MC170 remote control) SHUFFLE playing all the tracks in the disc in random order. it can also be used during program mode. To shuffle all the tracks 1 Press SHUFFLE. SR e ~ "SHUFFLE" appears briefly on Q Q sr(u;u the display. OO ~~ The sum flag and the track & o &, selected at random appear on the display. -+ The tracks will now be played in random order, until you press STOP. 2 Press SHUFFLE again to resume normal play.
gsyibug 16 Clock Setting Timer Setting i) riser st e muaevavse roomer O ransomer O o Hale O Setting the clock The clock is displayed in military time. For examples 13:00 =1 P.M. and 00:00 Press FLOCK SET. — NG stars flashing. Set the hour with PRESET ¥ or &, Set the minute with TUNING . Press CLOCK SET again te store the setting. The clock starts running. Note: When a power interruption occurs, the clack settings are erased, and "5 8" will flash on the display.
Maintenance Maintenance Gleaning the Cabinet * Use a soft cloth sightly moistened with mild detergent solution. Do not use solution containing alcohol, spirits, ammonia or abrasive. Cleaning the Compact Disc « When a disc becomes direly, clean it with a cleaning cloth. Wipe the disc from the central out. * Do ot use salients such as benzine, thinner, commercially available cleaners, or anti-static spray intended for-analog Cords.
Trouble Shooting Guide Warning! Under no circumstances should you fry to repair the set yourself, as this will invalidate the guarantees, suburb * | a faults occurs, first check the points listed below before taking the set for repair. « Should any problems persist after you have made these checks, consult your nearest dealer or service center. Symptom Cause Remedy Barbadian Be caption The STEED indicator flashes The signal strength is too weak. Adjust the anteing.
