User guide

Specifications
AMPLIFIER
Output power ..................................... 2 X 5 W RMS
.................................................. 10 W total power
Signal-to-noise ratio ....................... > 65 dBA (lEC)
Frequency response ......... 40 - 20000 Hz, + 3 dB
Input sensitivity AUX ...................... 0.5 V (max. 2V)
Impedance loudspeakers ................................... 8 П
Impedance headphones .................. 32 Q -1000 ,Q
CD PLAYER
Frequency range ............................ 20 - 20000 Hz
Signal-to-noise ratio .................................... 75 dBA
TUNER
FM wave range ............................. S7.5 - 108 MHz
AM wave range ............................. 530 - 1700 kHz
Sensitivity at 75 £2
- mono, 26 dB signal-to-noise ratio .............. 2,8 pV
- stereo, 46 dB signal-to-noise ratio ........... 61.4 pV
Selectivity .................................................... > 28 dB
Total harmonic distortion ................ : ................ < 5%
Frequency response ...... 63 - 12500 Hz (± 3 dB)
Signal-to-noise-ratio.................................> 50 dBA
TAPE DECK
Frequency response
Normal tape (type I)... 120 - 10000 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I) ................................ 48 dBA
Wow and flutter .................................... < 0.4% DIN
SPEAKERS
Bass reflex system
Dimensions (w x h x d). 155 x 220 x 210 (mm)
...................................... 6.1 Ox 8,66 X 8.26 (inch)
GENERAL INFORMATION »s
AC Power .......................................... 120V/^0Hz
Dimensions (w x h x d) .. 140 x 223 x 253 (mm)
...................................... 5.51 X 8.78 X 9.96 (inch)
Weight (with/without speakers) .......................... .......
................................................ approx, 6.0 / 2.8 kg
.................................... approx. 13.2 / 6,16 pound
Standby power consumption ......................... <t 3 W
Subject to modification
Troubleshooting
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty. Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or service center.
Problem
Solution
CD OPERATION
’ is displayed.
Insert a disc.
Check if the disc is inserted upside down.
Wait until the moisture condensation at the lens
has cleared.
Replace or clean the disc, see "Maintenance".
Use a finalized CD-RW or CD-R.
20