User guide

Clock/Timer
Setting the clock
1 In standby; press CLOCK.
-► The clock digits for the hours flash.
2 Turn VOLUME to set the hours: clockwise for
hours up; counter-clockwise for hours down.
3 Press CLOCK again.
-♦ The clock digits for the minutes flash.
4 Turn VOLUME to set the minutes: clockwise for
minutes up; counter-clockwise for minutes down.
5 Press CLOCK to confirm the time.
Setting the timer
• The system can be used as an alarm clock,
whereby the CD orTUNER is switched on at a
set time.The clock time needs to be set first
before the timer can be used.
• During setting, if no button is pressed within 90
seconds, the system will exit timer setting mode
automatically,
1 In any mode, press TIMER ON*OFF for more
than 2 seconds.
2 Turn VOLUME clockwise (or press SELECT
SOURCE) to select sound source.
3 Press TIMER ON'OFF to confirm your
desired mode.
The selected source or
is shown. The clock digits for the hours flash.
4 Turn VOLUME to set the hours: clockwise for
hours up; counter-clockwise for hours down.
Press TIMER ON*OFF again.
-> The clock digits for the minutes flash.
Turn VOLUME to set the minutes: clockwise for
minutes up; counter-clockwise for minutes down.
Press TIMER ON*OFF to confirm the time.
-♦ The timer is now set and activated.
Activating and deactivating
TIMER
In standby or during playback, press
TIMER ON*OFF once.
-> Display shows timer if activated, and f
disappears if deactivated,
----------------------------------------------------------Ц-----------
Activating and deactivating
SLEEP
The sleep timer enables the system to switch off
by itself after a set period of tiijie.The dock time
needs to be set first before the sleep timer can
be used.
Press SLEEP on the remote
control once or more.
-* Display shows BLEEP and
one of the sleep time options
in sequence: Gu, HG, 30, IG,
GEGGP nrr.Gu... if you have
selected a time. Once SLEEP is activated, BLEEP
utJ scrolls across the display at repeated •
intervals.
To deactivate,'press SLEEP on the remote
control once or more until BLEEP OEI- is
shown, or press STANDBY ON on the system
or remote control.
GEGGP uEE scrolls across the display.
19