Register your product and get support at www.philips.
EN 1 Important Safety Read and understand all instructions before you use this micro music system. If damage is caused by failure to follow the instructions, the warranty does not apply. Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use.
Visible and invisible laser radiation when open. Avoid exposure to beam. Do not touch the disc optical lens inside the disc compartment. Never place the product or any objects on power cords or on other electrical equipment. If the product is transported in temperatures below 5°C, unpack the product and wait until its temperature matches room temperature before connecting it to the power outlet.
Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste.
The making of unauthorized copies of copy-protected material, including an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. 2012 © Koninklijke Philips Electronics N.V. " # $ the property of Koninklijke Philips Electronics N.V or their respective owners.
What’s in the box Check and identify the contents of the package: Micro music system MP3 link cable User manual Overview of the system a q b c d e p o n f g m h l i INTRO PROG k j a Cover of disc compartment b Disc compartment c Integrated speaker d e DBB Slide to enable or disable the DBB sound effect. Indicator window Indicate the frequency of current FM radio station.
f TUNING Rotate to select an FM radio frequency. g SHUFFLE & % h REPEAT Press repeatedly to select a play mode: repeat the current track, repeat all tracks, or play tracks in sequence. i j k STOP Stop the play of an audio track. Press twice to erase a program play. PLAY/PAUSE Start, pause, or resume the play of audio tracks. / PREVIOUS/NEXT Skip to the previous/next audio track. l PROG Program audio tracks.
3 Get started Caution Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. Connect power Connect the power adaptor to the power supply socket.
Turn on and select a source Slide the power switch and source selector to CD or FM. » The LED indicator beside the LCD screen lights up in red. To turn off the system, slide it to OFF. When the power switch and source selector is not in the “OFF“ position and an MP3 link cable is connected to the MP3-LINK socket, the system automatically switches the source to audio input through the MP3-LINK socket.
Pause play. the track number and (blinking) Stop play. the total number of tracks / Press to skip to the previous or next track. the track number and / Press and hold to rewind or search forward fast within a track. the track number and Program tracks Note You can program a maximum of 20 tracks. During programming, if no operation is made within 20 seconds, the system returns to stop mode without saving programmed tracks. 1 Press to stop play. » The total number of tracks is displayed.
Erase the program To erase the program, Press twice. Slide the power switch and source selector. Scan all tracks During play, press INTRO '* % by one. To stop scanning, press INTRO again. 5 Listen to radio Note For optimal reception, fully extend the FM antenna and adjust its position. 1 2 6 Slide the power switch and source selector to FM. Rotate the TUNING knob to tune to an FM radio station.
M P 3 -L IN K 1 2 Slide the power switch and source selector to CD or FM. 3 Play the external device. Connect the MP3 link cable to the MP3-LINK socket on the system, and the audio output socket (usually the headphone socket) on the external device. Note To play audio input from other sources, disconnect the MP3 link cable from the system.
7 Adjust sound The following operations are applicable to all supported media. Adjust the volume level Rotate the - VOLUME + knob clockwise or anti-clockwise to increase or decrease the volume level. Use the DBB sound effect Slide DBB to ON to enable the DBB sound effect. To disable the DBB sound effect, slide DBB to OFF. 8 Product information Note Product information is subject to change without prior notice.
Disc Laser type Semiconductor Disc diameter 12 cm, 8 cm Supported discs CD-DA, CD-R, CD-RW Audio DAC 24 Bits, 44.
Maintenance Clean the cabinet Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Clean discs When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Clean the disc lens After prolonged use, dirt or dust may accumulate at the disc lens.
Problem Solution No power. Make sure that the power adaptor is securely connected to the power supply. Make sure that the power supply is available. No sound or Adjust the volume level. poor sound. To play audio input from a source other than MP3LINK socket, disconnect the MP3 link cable. No response Reconnect the power adaptor, and then turn on the from the system again. system.
" # © 2012 Koninklijke Philips Electronics N.V. All rights reserved. MC1000_12_UM_V1.
