Micro Hi-Fi System MC M530 visit our website www.audio.philips.com to download latest UPDATES of USB PC Link Driver MusicMatch Jukebox softwares and FAQs.
México Es necesario que lea cuidadosamente su instructivo de manejo. PRECAUCIÓN - ADVERTENCIA No abrir, riesgo de choque eléctrico ATENCIÓN Verifique que el voltaje de alimentación sea el requerido para su aparato Para evitar el riesgo de choque eléctrico, no quite la tapa. En caso de requerir servicio, dirijase al personal calificado. Microsistema de Audio MCM530/ 21 110–127 / 220–240V; ~50–60 Hz 75 W Philips Mexicana, S.A. de C.V. Av. La Palma No.6 Col.
P1 P3 ☞ P4 P2 P5 3 3
Energy Star As an ENERGY STARR Partner, Philips has determined that this product meets the ENERGY STARR guidelines for energy efficiency.
Français -------------------------------------------- 27 Français Español --------------------------------------------- 48 Español English ------------------------------------------------ 6 English Index -------------------------------------------------------- 69 5 MC-V320/21-1
Contents English General Information Disc Operations Supplied accessories ............................................ 7 Environmental information ................................ 7 Care and safety information .............................. 7 Playable discs ....................................................... 17 Loading discs ....................................................... 17 Basic playback controls ..................................... 17 Playing an MP3 disc .................................
Refer to the type plate on the rear or bottom of the system for identification and supply ratings. Supplied accessories (page 3 – P1) – – – – – – USB PC LINK software installer disc USB cable Remote control and two AA batteries. MW loop antenna FM wire antenna AC power cord Environmental information All unnecessary packaging has been omitted.
Functional Overview English 0 9 ! @ # § * 0 $ 5 8 $ % ^ & * ∞ 7 6 5 4 3 ( 4 6 ¡ 7 ™ £ ≤ ∞ # 3 ≥ • ª º % ^ ⁄ 2 ) 1 Main unit and remote control 1 ECO POWER indicator – Lights up when the system is in Eco Power standby mode. 2 STANDBY ON B – – Switches to Eco Power standby mode or turns on the system. *Switches to standby mode. 3 PLAY•PAUSE ÉÅ – – – CD: starts/pauses playback. USB PC LINK: starts/ pauses playback.
! OPEN /CLOSE 0 1~5 – Control buttons available on the remote control only Opens / closes the individual disc tray. @ iR ¡ REPEAT – – Point the remote control towards this sensor. Repeats a track /disc / all programmed tracks. # MAX SOUND (MAX ON /OFF) ™ SLEEP – – Turns on/ off the optimal mix of various sound features. $ MASTER VOLUME (VOL +-) – Adjusts the volume level. Sets the sleep timer function. £ CLOCK – – *Enters clock setting mode. Switches to clock display mode.
Connections English MW VOLTAGE SELECTOR 110V127V 220V240V NOT FOR ALL VERSIONS Refer to page 3 - P5 Warning! – Please note that the voltage selector located at the rear of this system is preset at 220V from the factory. For countries that operate at 110V-127V, please adjust to 110V-127V before you switch on the system. – Use only the supplied speakers. The combination of the main unit and speakers provides the best sound.
Step 2: Connecting the speakers Step 5: Connect the speaker wires to the SPEAKERS terminals, right speaker to "R" and left speaker to "L", coloured (marked) wire to "+" and black (unmarked) wire to "-". Fully insert the stripped portion of the speaker wire into the terminal as shown. Notes: – Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit. – Do not connect more than one speaker to any one pair of +/- speaker terminals.
USB PC Link English IMPORTANT! – Make sure the mute setting on your PC control panel is deactivated to ensure you get the sound from your audio system! Quick setup guide Windows 98SE/ ME/2000/XP Intel Pentium MMX200 or higher CD-ROM drive USB port Free hard disk space: 80 MB for the software 5 6 Software installation 34 1 12 Turn on your PC and insert the installer disc into your PC’s CD-ROM drive. The installation guide will appear automatically.
Using MusicMatch software 2 To create a music library 3 4 Note: – It is not possible to create a playlist from the system’s 5 CD changer. If you encounter any problem using USB PC Link, please refer to the FAQ (Frequently Asked Questions) stored in your USB PC Link installer disc or visit “www.audio.philips.com” for the latest update on FAQ. Add music files to My Music Library Add files to My Library by dragging and dropping audio tracks from anywhere in Windows, into the My Library window.
USB PC Link English Notes: – When the USB PC Link feature is activated, Philips Sound Agent 2 will automatically be launched (if it has been successfully installed under OS Windows 2000/XP). – The default setting for PRESET/REVERB is MP3/ Study Room respectively.You may select from the list of different sound modes to suit your music and environment preference. Alternatively, you may select PRESET (Neutral mode) and REVERB (No Environment mode) for the minimum sound effect.
Switching on/off Setting the clock Switching to active mode The clock can be set in either 12-hour or 24-hour mode ("11:59 PM" or "23:59" for example). ● Press CD, TUNER, AUX or USB PC LINK. 4 (00:00 / 12:00AM) 1 3 (00:00 / 12:00AM) Switching to Eco Power standby mode ● Press B. ➜ ECO POWER button lights up. ➜ The display screen will go blank. 2 (00:00 î 12:00AM) Switching to standby mode (view clock) ● Press and hold B. ➜ The clock is displayed.
Basic Operations English Selecting different display modes Dim mode You can select the desired brightness for the display panel. ● In any active mode, press DIM repeatedly to select DIM 1, DIM 2, DIM 3 or DIM OFF display mode. ➜ DIM is shown, except for DIM OFF mode.
IMPORTANT! – This system is designed for regular discs. Therefore, do not use any accessories such as disc stabiliser rings or disc treatment sheets, etc., as offered on the market, because they may jam the changer mechanism. – Do not load more than one disc onto each tray. Playable discs This system is able to play: – All pre-recorded audio CDs – All finalised audio CDR and audio CDRW discs – MP3-CDs (CD-ROMs with MP3 tracks) English Disc Operations Basic playback controls Load discs (page 3 – P4).
Disc Operations English Playing an MP3 disc Repeat and Shuffle You can select and change the various play modes before or during playback. TITLE A02 T008 1 3 4 Repeat play 1 5 D I S C D I R E C T P L AY DISC 1 DISC 2 DISC 3 DISC 4 Press REPEAT on the remote repeatedly to select : DISC 5 OPEN/ CLOSE DISC 21 1 DISC 32ON/OFF POWER 2 3 3 DISC 43 DISC DISC 1 54 2 DISC 5 4 CD / CD-R / CD-RW COMPATIBLE 5 ALBUM A02 T001 1 2 Press ALBUM 4 3 (or à á) to select a desired album.
Notes: – If the total playing time reached 100 minutes or if one of the programmed tracks has a number greater than 30, then "--:--" is displayed instead of the total playing time. – The system will exit programming mode if no button is pressed within 20 seconds. Programming the disc tracks Programming tracks is possible when playback is stopped. Up to 99 tracks can be stored in the memory in any order. IMPORTANT! It is only possible to programme from the current selected disc tray.
Tuner Operations English IMPORTANT! Make sure the FM and MW antennas are connected. 2 Press ÉÅ on the main unit to start installation. ➜ "INSTALL TUNER" is displayed. ➜ All previously stored radio stations will be replaced. Tuning to radio stations 1 Press TUNER to enter the tuner mode. To select another waveband (FM or MW), press TUNER again. 2 Press and hold à or á until the frequency indication starts to change, then release.
English Tuner Operations Changing tuning grid (not available for all versions) In North and South America, the frequency step between adjacent channels in the MW band is 10 kHz (9 kHz in some areas). The preset frequency step in the factory is 9 kHz. IMPORTANT! Changing the tuning grid will erase all previously stored preset radio stations. 1 2 Disconnect the system from the AC power supply (pull out the AC power cord).
Timer Operations English Timer setting The system can switch on to CD, TUNER or USB PC LINK mode automatically at a preset time, serving as an alarm to wake you up. IMPORTANT! – Before setting the timer, ensure that the clock is set correctly. – The volume of the timer will increase gradually to the last tuned volume level. If the last tuned volume level is too low, the set will then increase to a predetermined minimum audible level.
Other Connection Listening to an external source Temporarily deactivating the wake up timer You can listen to the sound of the connected external device through your system’s speakers. You are only able to activate the Snooze function within 30 minutes after the timer wakes up from standby mode. 1 After timer wake up, press SNOOZE on the remote. ➜ The system will switch to standby mode for five minutes. After that, it resumes the last selected source again.
Specifications English AMPLIFIER Output power ..................................... 2500 W PMPO ................................................................. 2 x 75W RMS(1) Signal-to-noise ratio .......................... ≥ 75 dBA (IEC) Frequency response ........... 50 – 20000 Hz, –3 dB Input sensitivity AUX / CDR In ........................................... 500 mV /1V Output Speakers .................................................................... ≥ 6 Ω Headphones ..............................
WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem Solution Auto Installation of the Installer CD-ROM did not install the Philips Sound Agent 2 onto my PC.
Troubleshooting English Problem Solution The timer is not working. ✔ Set the clock correctly. ✔ Press TIMER ON/OFF to switch on the timer. The system displays features automatically and buttons start flashing. ✔ Press and hold STOP DEMO on the main unit to switch off the demonstration mode. Refer to the FAQ (Frequently Asked Questions) on the supplied CD-ROM or visit our website “www.audio.philips.com” for latest update on FAQ.
