Micro Hi-Fi System 200 MC- 1 pg 001-022/MC200/22-Eng 1 10/5/01, 4:23 PM 3140 115 28691
Important notes for users in the U.K. Italia DICHIARAZIONE DI CONFORMITA’ Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Si dichiara che l’apparecchio MC-200 Philips risponde alle prescrizioni dell’art. 2 comma 1 del D.M. 28 Agosto 1995 n. 548. 1 2 Remove fuse cover and fuse. Fatto a Eindhoven 3 Refit the fuse cover. Fix new fuse which should be a BS1362 5 Amp, A.S.T.A. or BSI approved type.
% 1 2 CD 2 ^ & TUNER REPEAT TAPE SHUFFLE ) 6 ë í Å É Ç á á 0 * $ SLEEP VOL # OPEN • CLOSE AUX DSC DBB MUTE IS NEWS/TA ( CD/CD-R/CD-RW COMPATIBLE 3 1 STANDBY ON 2 SELECT SOURCE CD TIMER PROGRAM PROGRAM PROGRAM TIMER ON • OFF DSC DBB 4 5 6 INCREDIBLE SURR.
DK SF Advarsel: Usynlig laserstråling ved åbning når sikkerhedsafbrydere er ude af funktion. Undgå utsættelse for stråling. Luokan 1 laserlaite Varoitus! Laitteen käyttäminen muulla kuin tässä käyttöohjeessa mainitulla tavalla saattaa altistaa käyttäjän turvallisuusluokan 1 ylittävälle näkymättömälle lasersäteilylle. Oikeus muutoksiin varataan. Laite ei saa olla alttiina tippu-ja roiskevedelle. Bemærk: Netafbryderen er sekundært indkoblet og ofbryder ikke strømmen fra nettet.
English Index Français English ------------------------------------------------ 6 Español Français -------------------------------------------- 23 Deutsch Español --------------------------------------------- 40 Nederlands Deutsch --------------------------------------------- 57 Italiano Nederlands ---------------------------------------- 74 Svenska Italiano ---------------------------------------------- 91 Dansk Svenska ------------------------------------------- 108 Suomi Dansk ----------
Contents English General Information Clock/Timer Environmental information ................................ 7 Supplied accessories ............................................ 7 Safety information ................................................ 7 Setting the clock ................................................. 19 Setting the timer ................................................. 19 Activating and deactivating TIMER ................. 19 Activating and deactivating SLEEP ..................
This product complies with the radio interference requirements of the European Community. Environmental Information All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet). Your system consists of materials which can be recycled and reused if disassembled by a specialized company.
Preparations English AM loop antenna FM wire antenna speaker (right) AM aerial B C speaker (left) A AC power cord B Antennas Connection Rear connections The type plate is located at the rear of the system. A Power Connect the supplied AM loop antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception. AM Antenna Before connecting the AC power cord to the wall outlet, ensure that all other connections have been made.
FM Antenna English Preparations Optional connection The optional equipment and connecting cords are not supplied. Refer to the operating instructions of the connected equipment for details. ● For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL (FM ANTENNA) terminal. C Speakers Connection Front Speakers Connect the speaker wires to the SPEAKERS terminals, right speaker to "RIGHT" and left speaker to "LEFT", coloured (marked) wire to "+" and black (unmarked) wire to "-".
Controls (illustrations on page 3) English Controls on the system and remote control @ REPEAT/ REV MODE/ BAND 1 STANDBY ON y – – 2 – – 3 – 4 5 – 6 – – 7 8 9 – 0 ! – switches the system to standby/on. on the remote control only - switches the system to standby. SELECT SOURCE selects the respective sound source for CD/ TUNER/ TAPE /AUX. switches on the system. Display shows the status of the system. PROGRAM for CD ................. programmes tracks and reviews the programme. for Tuner ..........
Adjusting volume and sound CD STANDBY ON PROGRAM TIMER 1 Turn the VOLUME control anti-clockwise to decrease or clockwise to increase volume on the system (or press VOL -/+ on the remote control). ➜ Display shows the volume level VOL and a number from 0-32. 2 Press DSC repeatedly to select the desired sound effect: OPTIMAL (no indication)/ ROCK ( ) / JAZZ ( ) / POP ( ). 3 Press DBB to switch bass enhancement on or off. ➜ Display shows: DBB if the DBB is activated. 4 Press INCREDIBLE SURR.
CD Operation English CD STANDBY ON 5 To interrupt playback press PLAY•PAUSE 2; (on the remote control 2;). Press PLAY•PAUSE 2; (on the remote control 2;) again to resume play. ➜ The display freezes and the elapsed playing time flashes when playback is interrupted. 6 To stop disc playback, press STOP 9. PROGRAM PROGRAM TIMER ON • OFF SELECT SOURCE DSC DBB INCREDIBLE SURR. INTERACTIVE SOUND Note: CD play will also stop when; – the CD door is opened. – the disc has reached the end.
Programming track numbers Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback. The play modes can also be combined with PROGRAMME. 1 Press PROGRAM to enter the programming mode. ➜ A track number is shown and PROGRAM flashes. 2 Use the PREV ¡1 or NEXT 2™ (on the remote control ¡ or ™) to select your desired track number.
Radio Reception English Programming radio stations TUNER You can store up to a total of 40 radio stations in the memory. PROGRAM TIMER STANDBY ON PROGRAM TIMER SELECT SOURCE ON•OFF DSC DBB Automatic programming Automatic programming will start with a chosen preset number. From this preset number upwards, former programmed radio stations will be overridden. The system will only programme stations which are not in the memory already. INCREDIBLE SURR.
Searching programme type (PTY) Tuning to preset radio stations ● Press PRESET 4 or 3 (on the remote control ¡ or ™ ) until the desired preset station is displayed. PTY helps you find a desired programme type. To enable PTY, first programme RDS stations into the tuner memory (see “Programming radio stations”) RDS Radio Data System is a service that allows FM stations to show additional information. If you are receiving a RDS station, and the station name are displayed.
Radio Reception English RDS News and Traffic Announcement (TA) You may set up the tuner in such a way that listening to CD or tape is interrupted by the NEWS of a RDS station. This only works if the RDS station broadcasts a NEWS signal while sending the news. 1 2 Tune to the desired RDS station. Disarming RDS News and Traffic Announcement There are a number of ways to disarm the news feature: ● Press NEWS/TA on the remote control during reception of the news option.
English Tape Operation / Recording Switching tape sides PROGRAM TIMER STANDBY ON SIDE A PROGRAM SIDE B TIMER TIMER SELECT SOURCE ON • OFF ON • OFF DSC DBB INCREDIBLE SURR. The tape side can be switched manually or automatically before or during tape playback. ● Press SIDE A/B (during playback only 2; on the remote control). ➜ The display shows SIDE A or SIDE B and the tape counter resets to 000.
Tape Operation / Recording English Synchro start CD recording Recording timer 1 2 Select CD source. To record from the radio, you will need to use a preset radio station and to set a start (ON) and finish (OFF) time. 3 4 Press OPEN to open the tape door. Insert a disc and if desired, programme track numbers. 1 Insert a suitable tape into the deck. ➜ If desired, select tape reverse mode option. 2 3 Select the preset radio station to record from.
Setting the timer CD STANDBY ON PROGRAM TIMER PROGRAM TIMER SELECT SOURCE ON•OFF DSC DBB INCREDIBLE SURR. INTERACTIVE SOUND VOLUME iR SENSOR STOP PRESET PLAY•PAUSE RDS CLOCK REPEAT TUNING RECORD TUNING SHUFFLE REV MODE BAND SIDE A/B PREV NEXT 1 In any mode, press TIMER ON•OFF for more than 2 seconds. 2 Turn VOLUME clockwise to select sound source. ➜ Display sequence shows CD, TUNER, TAPE or REC TUNER. 3 Press CLOCK for more than 2 seconds.
Clock/Timer English Activating and deactivating SLEEP The sleep timer enables the system to switch off by itself after a set period of time. The clock time needs to be set first before the sleep timer can be used. ● To deactivate, press SLEEP on the remote control once or more until SLEEP OFF is shown, or press STANDBY ON on the system or remote control. ➜ SLEEP OFF scrolls across the display. TAPE AUX ● Press SLEEP on the remote control once or more.
Cleaning the Cabinet ● Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. Cleaning Discs ● When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the centre out. ● Do not use solvents such as benzene, thinner, commercially available cleaners, or antistatic spray intended for analogue records. Cleaning the disc lens ● After prolonged use, dirt or dust may accumulate at the disc lens.
Troubleshooting English RADIO RECEPTION Radio reception is poor. – If the signal is too weak, adjust the antenna or connect an external antenna for better reception. – Increase the distance between the Micro HiFi System and your TV or VCR. TAPE OPERATION / RECORDING Recording or playback cannot be made. “CHECK TAPE” is displayed. The tape deck door cannot open. GENERAL The system does not react when buttons are pressed. Sound cannot be heard or is of poor quality.
