Flat Panel Television User Manual

22
To enhance the sound reproduction of your TV you can connect an
externally powered subwoofer (between 20 and 250 Hz).
& Connect the audio cable of the external subwoofer to the
SUBWOOFER socket at the bottom of your TV.
é Select Subwoofer in the Setup, General menu, p. 9.
“ Adjust the frequency of the external subwoofer to 100-120 Hz
(according to your personal preference) if present on the
subwoofer.
‘ Adjust the volume level of the external subwoofer, presumed
this control is present on the subwoofer.
See also the instruction manual of the external subwoofer.
SUBWOOFER
VID
EO
A
U
D
IO
3
2
1
S•V
ID
EO
USB
Camera or Camcorder
& Connect your camera or camcorder as shown.
é Connect to VIDEO 2 and AUDIO L 3 for mono
equipment. For stereo equipment also connect
AUDIO R 3.
S-VHS quality with an S-VHS camcorder is obtained by
connecting the S-VHS cables with the
S-VIDEO input 1 and
AUDIO inputs 3.
Do not connect cable 1 and 2 at the same time.This may cause
picture distortion !
Headphone
& Insert the plug into the headphone socket L as shown.
é Press ¬ on the remote control to switch off the internal
loudspeakers of the TV.
The headphone impedance must be between 8 and 4000 Ohm.The
headphone socket has a 3.5 mm jack.
In the Sound menu select
Headphone volume to adjust the
headphone volume.
USB connector
Connect your device with a USB output connector (e.g. a digital
camera, a USB memory stick) to the
USB connector.
Side connections
Connect extra subwoofer