Operation Manual

16
The intelligent fax switch enables you to phone and fax from the
same telephone connection and use additional devices.
In mode S the fax machine rings when you receive a
telephone call or fax. In mode M you may wish not to be
disturbed, faxes will therefore be received silently, without
the fax machine ringing. When mode U is activated, the
fax machine automatically switches between S and M by
the aid of a built-in clock.
The fax switch offers you the full range of features
regarding the connection of additional devices. Telephone
connections are either serial or parallel. Using EASY
INSTALL (press INSTALL/HELP for two seconds) your fax
machine recognises the type of connection and adapts
automatically.
Serial connection
If the machine has detected a serial connection, all incoming
calls are analysed by the intelligent fax switch whether to be faxes
or telephone calls. The latter will also ring on additional phones.
Parallel connection
A parallel configuration does not permit the full functionality of the
intelligent fax switch. With a parallel connection, each call arrives simul-
taneously at your fax machine and each additional telephone. Conse-
quently, your fax machine is now unable to control the additional
telephones. Also, calls cannot be transferred between your fax
machine and another parallel telephone.
4 Fax switch
Mode
UU
UU
U
By default, your fax machine is set to mode U that means it switches
automatically between S and M. The factory setting provides that
your machine switches at 10 pm to M and at 6 am back to S.
UU
UU
U deactivating/activating
1 If you want to switch off function U, press S/M/U for two
seconds until you hear a confirmation tone and the pointer above
U disappears. Only the pointer above S or M will then appear
on the display.
2 If you would like to activate U, press S/M/U for two seconds,
until you hear a confirmation tone and the pointers above U as
well as S or M appear on the display.
UU
UU
U configuring/checking
1 Select function 33.
2 Enter the time at which you want your fax machine to switch
automatically to S. Confirm with OK.
3 Enter the time at which you want your fax machine to switch
automatically to M. To confirm your settings press OK.