Operation Manual

40
On the cordless telephone
1 Press [, and using [ select SETTINGS.
2 Confirm using OK.
3 Dial using [
ADVANCED SET..
4 Confirm using OK.
5 Dial using [
SET BASE.
6 Confirm using OK.
7 Dial using [
DELETE HANDSET.
8 Confirm using OK.
9 Using [ select which cordless telephone you are
would like to de-register.
10 Confirm using OK.
11 Confirm the de-registration with ô
Yes. The con-
nection with the device is disconnected.
Registering the cordless telephone with
other devices
You can register a cordless telephone on four different de-
vices (= base units).
On the device
1 Register the cordless telephone with the first device as
described above.
2 Press OK, 82 and OK on the next device.
3
Confirm the preset PIN code ( 0000 ) or enter a new PIN code.
4 Confirm using OK.
On the cordless telephone
5 Press [, and using [ select
SETTINGS.
6 Confirm using OK.
7 Dial using [
ADVANCED SET..
8 Confirm using OK.
9 Dial using [
SET HANDSET.
10 Confirm using OK.
11 Dial using [
PERSON.REGISTR.
12 Confirm using OK.
13 Select the next device (= base station) using [.
14 Confirm using OK.
15
Confirm the name of the base unit, or enter a new name.
16 Confirm using OK.
17
Enter the same pin code which you entered on the other device.
18 Confirm using OK.
19 Using [ select the number with which you would like
to register the cordless telephone on the device.
20 Confirm using OK.
Setting the preferred base unit
Preferred base unit
With this function you can specify which device (= base
station) should be used for placing telephone calls if you
have registered your cordless telephone with multiple de-
vices. When you select
AUTO, the cordless telephone auto-
matically connects to the device that is within the range.
1 Press [, and using [ select
SETTINGS.
2 Confirm using OK.
3 Dial using [
ADVANCED SET..
4 Confirm using OK.
5 Dial using [
SET HANDSET.
6 Confirm using OK.
7 Dial using [
BASE PRIORITY.
8 Confirm using OK.
9 Press õ
EDIT ENTRY.
10 Using [ select the device to which you would like to
assign the priority, or select auto setting.
11 Confirm using OK.
Connecting Additional Devices
Additional Devices
You can operate other devices on a telephone line, for in-
stance answering machines, modems or charge counters
Connection to the device
Connection to the Machine
You can connect additional devices directly to your ma-
chine. Plug the telephone cable of the additional device
into the EXT socket (RJ-11 connection) of your machine.
Connecting in Serial
Connection to the Telephone Line
Order of Connection s
In order for the fax switch to function, the machine must
be first in the series if multiple devices are connected to the
same telephone socket. Follow the correct order.
Using Additional Telephones (Easylink)
Easylink
With the Easylink function, you can control your machine
with additional telephones. To use this function, addition-
al telephones must be set to tone dialling (DTMF tones);
see here the user manual of your additional telephone.
Starting Fax Reception
If you pick up on an additional device and hear that you
are receiving a fax message (whistle or silence), you can
start the fax reception by pressing *5 on the additional
telephone or the START button on the machine.
Taking Over the Line
If you pick up on an additional telephone and the machine
continues to ring or attempts to receive a fax, you can dis-
connect the machine from the line. Press ** on the ad-
ditional telephone.
Changing Codes
Easylink Codes
1 Press OK, 54 and OK.
2 Enter the new code for starting fax reception.
3 Confirm with OK.
4 Enter the new code for taking over the line on an addi-
tional device.
5 Confirm with OK.
The pin code can be identical with the pin code
on the first device.
We recommend direct connection to the machine
because this allows the fax switch to function opti-
mally and to control the additional devices.
Only change the codes if it is absolutely necessary.
The codes must begin with * or # and must be
different.