Operation Manual

4
Connecting the Telephone Cord
Connecting the Te lephone Cable
Connect the telephone cord to the device by inserting it in
the socket designated with LINE (RJ-11-Connector). In-
sert the telephone plug into your telephone connection
socket.
Connecting the Te lephone Cable
Extension
Ireland
Two-pin
When connecting to the telephone line socket, use only a
two-pin RJ-11-telephone cable (modular plug). The use
of a four-pin cable may lead to the machine not function-
ing correctly.
Connecting the Power Cord
Power Type at Setup Location
Device power cord
Connecting power cord of the device
Connecting the Power Cable
Insert the power cable into the connection located on the
rear side of the machine. Connect the power cable to the
electrical socket.
Connecting the Power Cable
Charging station power cord
Connecting the power cord of the charg-
ing station
Connect the mains cable of the charging station to the
electrical socket.
Connecting the charging stati on
Initial Installation
Starting the Initial Installation
After you connect your device to the mains, the initial in-
stallation commences. Press i. Your device prints a help
page.
Selecting the Language
1 Use [ to select the desired display language.
2 Confirm with OK.
Selecting the Country
Setting the Cou ntry Correctly
Setting the Cou ntry
1 Use [ to select the country in which you are operat-
ing the machine.
2 Confirm with OK.
After this input, the machine prints another help page and
checks the telephone line.
Entering Your Number
Header
Your name and number are added together with date, time
and page number at the top edge of each fax transmission
(= header).
Entering Your Number
1 Enter your number. Using # or * you can enter a
plus sign.
2 Confirm using OK.
Entering Your Name
Entering Your Name
1 Enter your name. Letters are entered with the number
buttons (see labels). Enter special characters with 0.
Press the respective button repeatedly until the desired
letter or special character appears on the display.
2 Confirm with OK.
After the input, the machine prints an overview of the
functions.
If you connect your device as extension to a tele-
phone system, you must set it for working as an ex-
tension (also see Chapter "Telephone connections
and additional devices, page 39).
Check whether the power type of your machine (in-
dicated on the type plate) matches the power type
available at the setup location.
Always set the country in which you are operating
the machine. Otherwise, your machine is not adapt-
ed to the telephone network. If your country is not
included in the list, you must select a different setting
and use the correct telephone cable for the country.
Consult your retailer.
You can move the cursor with [. You can delete
individual characters with C.