Operation Manual

35
User Manual
Code No. 7140
When you enter this code, all your entered settings and
data will be erased, except for:
• received fax messages
• stored SMS messages
• stored short dial numbers
• stored telephone book numbers
• your name
• your telephone number
Example for using a service code:
1 Select MENU, 45 and press OK. Enter the
service code (7117 or 7140). Press OK.
2 With u you can select whether you really want
to delete your settings. Confirm with OK. Your fax
machine will be reset to its original configuration.
Care
Before opening the fax machine, make sure that you are
electrically discharged by e.g. touching the metal hous-
ing of a grounded appliance, a water pipe or radiator.
Use a soft, fluff-free cloth lightly moistened with a lit-
tle alcohol (96%). You can also use a special cloth for
cleaning fax machines (see Delivery Service). Do not
allow any moisture to penetrate inside the device.
Clean the scanner glass
1 Open the paper feed flap and carefully pull out the
paper. Close the flap.
2 Open the operation panel by lifting in the middle.
When you hear a soft click, the panel is engaged.
3 Open the scanner cover by pressing the two lugs in.
The cover will open downwards.
4 Use a soft cloth to gently wipe the scanner glass on
the top (A) and the white strips on the bottom (B).
5 Close the scanner cover on the left and right, mak-
ing sure it clicks into place.
6 Close the panel so that it also clicks into place.
7 Insert paper (see Installation / Loading paper).