Operation Manual

16
User Manual
Correction
If you have entered a wrong letter or number in func-
tion 13 or 14 you can correct the mistake during the
entering as well as later. If you want to make your cor-
rections later you have to select the functions for enter-
ing numbers or names once again.
Select a character with u and press C to delete it.
A long press on C (two seconds) will delete the whole
line. Press OK.
Display language
1 Select function 11 by pressing MENU, 11 and
OK.
2 Select the desired language with u.
3 Press OK.
Ring signal type
You can choose from ten different types of signals.
1 Select function 35 by pressing MENU, 35 and
OK.
2 Select the desired ring signal with 0 to 9.
3 Press OK.
Distinctive ringing
1 Select function 36 by pressing MENU, 36 and
OK on your fax machine.
2 Use </> to select the category that you would
like to assign a specific ring tone.
3 You can select from the following categories:
FAMILY
FRIENDS
SERVICE
WORK
4 Confirm with OK.
5 Use the number buttons from 0 to 9 to select
the desired ring type.
6 Confirm with OK.
Volume
Ringer
You can adjust the volume of the ring signal if the
fax machine is in stand-by mode or if it is just ringing.
Please note that different volumes can be sett for the
modus S and M (see chapter Fax switch).
1 By pressing u the display shows the current set-
ting for about three seconds.
2 Change the volume by pressing u until the de-
sired volume is achieved.
Speaker
You can adjust the volume of the loudspeaker at any
time by pressing DIAL (without built-in answering
machine) or z (with built-in answering machine).
1 Press DIAL/z.
2 Change the volume by pressing u until the de-
sired volume is achieved.
3 Finish your entry by pressing STOP.