Operation Manual

14
User Manual
Easy Install
Using EASY INSTALL your fax machine will be con-
figured according to your local conditions.
1 Press HELP/w for at least two seconds. Your fax
machine will print one page. Pull out the page firm-
ly and follow the instructions.
2 Your fax machine will then guide you on the display
through the first settings such as your fax number
and your name.
3 Afterwards you need to enter the current time and
date. Use the dial pad to enter the correct time and
date. Confirm with OK.
ISDN connection
Your fax machine is not an ISDN fax (group 4), but
an analogue fax machine (group 3). Therefore it can-
not be used directly on an ISDN connection. You will
need an (analogue) adapter or an ISDN connection for
analogue devices. For further information please refer
to your ISDN instructions.
If problems occur with fax reception over the ISDN
line, please note that many ISDN systems must be
specially configured for this (refer to the operating
manual of your ISDN system).
For devices with SMS functionality: Analog termi-
nals must be SMS-compatible.
Private branch exchange
Private branch exchange systems are very common in
large companies. ISDN connections are private branch
exchanges and are used very often in private house-
holds. To get a connection from a private branch ex-
change to the public network you have to dial a key to
obtain the outside line.
1 Select function 15 by pressing MENU and then en-
tering the digits 15. Press OK.
2 You can switch on the PABX operation using
u.
PABX: YES
PABX: NO
3 Then press OK.
4 Now enter the key that has to be pressed to obtain
an outside line.
This outside line access code must be obtained from
the manufacturer. This is either 0 or R (in some sys-
tems also described as FLASH) or a number key.
5 Press OK.
6 Use u to select CHECK: YES and press
OK.
Your machine will then check that the outside line can
be obtained. If the check is successful, briefly appears:
check OK.
If the check is successful, briefly appears:
check NOT OK.
You will be asked to repeat the entry. Change the outside
line access code. If you have entered the correct code
but the display nevertheless reads check NOT OK
then delete the code by pressing C.
In case your PABX requires R to obtain an outside
line but it is still not possible to get through to the
line, your system might not be according to the most
recent regulations. Therefore some technical settings
have to be changed on your fax machine. Please re-
fer to your Fax Call Centre (In the UK – you will
find the telephone number on the back cover).